Benches macOS

5

Fan control in OS9 v OSX

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

This is more an "inquiring minds" question that one about troubleshooting.

My MDD is the last of the dual-boot machines with a single 1.25G processor, 1.75G RAM, two 250G WD Caviar drives, and a Sonnet USB 2.0 card (NEC chipset). I have three partitions: one with 10.3.9 (soon to go away); one with 10.4.11 fully updated; and a small one with 9.2.2. In OSX, this thing runs like a champ.

This weekend I booted into OS9 to access an old but indispensable CAD program I occasionally need. Due to a rendering problem this program has running under Classic emulation, I do the 9-boot. I've noticed during the last couple of OS9-boot sessions, the fan seem to run fast enough for a vibration to be rather noticeable--call it intrusive. It happens with the CAD program, Freeehand 8, and when only the Finder is running. Under OSX, the fan never vibrates; the G4 is usually much quieter than the Beige G3 it usurped as my main computer.

The first time it happened, I figured it was a CD in the optical drive but this weekend I made sure to empty the optical before booting into OS9. I thought it was a temperature problem but I don't have a temp monitor for OS9. I quickly booted back to Tiger and the processor was only around 90F--very proper, and the fan sounds was normal.

This make me wonder whether OS9 had a different temp management system on the MDD. I'll admit it's probably time to evict a horde of dust bunnies off the fan housing, but the current symptoms seem only related to OS9.

Anyway, offered up for discussion as much as anything else.

5 replies

Sign in or join Beachball Help to reply.

  1. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    This make me wonder whether OS9 had a different temp management system on the MDD

    It does. The fans are supposed to be controlled by the firmware when the computer is running Mac OS 9. Mac OS X includes software for this task. Installing this update may help.

    (49608)

  2. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Thanks Neil. That put me on the right track. I checked ASP from OS9 and it shows the firmware was already at the 4.4.8 level. I thought it might be as the computer was ordered a number of months after the update was released.

    In checking the firmware status, however, I noticed the following line under "Hardware overview":

    "Attributes: Low power mode disabled because of PCI cards in slots: SLOT-3, SLOT_3"

    I suspect that explains the fan's enthusiastic activity. The PCI USB card is in PCI slot 3.

  3. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Low power mode...

    I read that as low-est power SLEEP mode disabled due to PCI-slot card. But that is just speculation, not based on any hard facts.

  4. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I have noticed that OS 9 does not run the fans up to full RPM under load like OS X does, and when I reboot into OS X, the initial temps are like 65 deg-C and start dropping, not sure how hot it got in OS 9. Peak under load temps in OS X are 62 C, idle is around 42 C with Nap enabled. I replaced the stock 120mm fan with a Silenx 18dB 90CFM fan.

    I was thinking about getting one of these thermometers and just running the wires to the display unit out the back to see how hot the CPU gets in OS 9.

    http://www.newegg.com/Product/Product.aspx?Item=N82E16811998046&cmre=scythe-_-11-998-046--Product

  5. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hi Grant,

    During that last OS9 boot, I did have the computer lock up when I manually slept it while I was away from the desk for about an hour. However, when it fell asleep normally it woke up happy.