Benches macOS

15

The device "EHCI Root Hub Simulation" @ 0…

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

I Have the problem with my usb port

When My Mac reboot the system in the log read this message

USB Notification: The device "EHCI Root Hub Simulation" @ 0xfd000000 has caused an overcurrent condition. The hub it is attached to has been disabled

I can disable this message because the USB Port work correctly

15 replies

Sign in or join Beachball Help to reply.

  1. 0

    BDAqua

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Can you tell which USB is missing in System Profiler>Hardware?USB?

    Are all USB devices unplugged?

    Have you tried Resetting MacBook and MacBook Pro System Management Controller (SMC)...

    http://docs.info.apple.com/article.html?artnum=303319

  2. 0

    alexrav

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Yes in hardware missing the usb Icon, but my usb work fine

    I try reset System Management Controller (SMC) use the key functione explane you

    thank's

    I'll know if it works

    best regards

    alex

  3. 0

    BDAqua

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Are all USB devices unplugged?

    Might also Boot off your Install Disk while holding down the *d key*, (not c key), then run the extended Apple Hardware Test. Some disks require you to use the Option key at bootup to select AHT. Some models have a separate AHT CD.

  4. 0

    alexrav

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Yes all device Are unplagged !

  5. 0

    alexrav

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    the problem was solved

  6. 0

    alexrav

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    *

  7. 0

    alexrav

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    My client has not explained it well!

    The problem is not solved!

    I doubt the Option key on the keyboard of the MacBook Pro where?

    You think I have to reformat the mac?

  8. 0

    BDAqua

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Did they run Apple Hardware test yet?

  9. 0

    alexrav

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    No

    How can do this test ?

  10. 0

    BDAqua

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Boot off your Install Disk while holding down the d key, (not c key), then run the extended Apple Hardware Test. Some disks require you to use the Option key at bootup to select AHT. Some models have a separate AHT CD.

  11. 0

    alexrav

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    the problem is not resolve

    A.

  12. 0

    BDAqua

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Still not clear if AHT was run...

    User uploaded file

  13. 0

    alexrav

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Just run AHT from CD but the system is OK

  14. 0

    BDAqua

    Imported from the Apple Support Forums via the Wayback Machine 🔗

  15. 0

    alexrav

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I've a mac book pro ?

    I can use this procedure only PowerBook or iBook computers

    A.