Benches macOS

15

Can anyone help setup infrared comms with OS X 10.5?

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

Hi

I've been trying to get my dive computer to talk to my mac for about 3 months now, without success. I have read a lot about it on various forums, and the answer has proved to be elusive.

This post on macosxhints gives a clue about how to possibly set up an IrDA device:

http://www.macosxhints.com/article.php?story=2003072008542035

In summary, it basically says: plug the dongle into a USB port. Load System Prefs and select Networking, "IrDA USB Modem" will now be available as an option for a new connection.

Unfortunately, the article dates from 2003, refers to OS 10.2.6 on a PowerBook 12" G4 Superdrive, so could be completely out of date.

I purchased a UWATEC infrared dongle, the same manufacturer as the dive computer (Galileo Terra). I plugged the device into a USB port of my MacBook Pro 2.6GHz. The device shows up in System Profiler like so:

Vendor-Specific:

Version: 0.01

Bus Power (mA): 500

Speed: Up to 12 Mb/sec

Product ID: 0x7780

Vendor ID: 0x9710

I then go to System Prefs > Networking, and choose new connection, and the options are: Airport, Firewire, Ethernet Adaptor (en3), Ethernet Adaptor (en2), Ethernet, Bluetooth, VPN, PPPoE, 6 to 4.

Does anyone know how I can get this IrDA thing setup? Any clues what could be going wrong?

any help appreciated

Andy

15 replies

Sign in or join Beachball Help to reply.

  1. 0

    Tim Haigh

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I googled a bit and it would seem you need to insall JTrak

  2. 0

    Retired Engineer

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    The infrared port on an MBP is receive only and can only be used with the remote control. It is not a data transfer port.

  3. 0

    Tim Haigh

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    The infrared port on an MBP is receive only and can only be used with the remote control. It is not a data transfer port.

    He is using an external usb infrared dongle.

  4. 0

    Andy Geach

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Thanks Tim. I know about JTrak, its the software that comes with the dive computer. I have done a large amount of googling, and I'm pretty sure I have read everything out there on this issue, but it still remains unresolved. There is some conflicting info around too which doesn't help; I'm trying to get some of that resolved by the developers of JTrak, awaiting a response.

    I'm trying to break the problem down to smaller chunks. At the moment I'd like to know how would I setup a IrDA communications channel from my Mac to another device. According to the manufacturers of the USB IrDA dongle, no extra drivers are required for use with a mac, (yet they include a disk image with mac drivers on it on their CD). But I would expect to have to do some setup in System Prefs, and that is the bit I'm trying to solve right now

  5. 0

    Tim Haigh

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    So have you tried the software?

    You plug in the device in your mac. Then point it toward the dive computer receiver. Launch the jtrak sofware on your mac. Then from the extras menu choose 'computer settings'

    What happens after this point?

  6. 0

    Andy Geach

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Yes, I have tried the software. Like I said, I have been trying to solve this problem for 3 months. The program pops up a dialog saying "Communication failed"

    I'm more interested at the moment in setting up the ir comms on the mac side. I used to use infrared for an old mobile phone on an old mac; the setup was something like what I described above in my first post, but it is so long ago I can't remember exactly how. I'm interested to know if any other users have setup any other communication devices that use IrDA, and what the steps are for 10.5, or if there are some config items to do beforehand (maybe something to do with System Prefs > Sharing ??)

  7. 0

    Tim Haigh

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    To see if the network preferences see the device as network port setup a new network location.

    unplug the device. Then goto systemprefernces-->network-->loca†ions-->edit locations--> click the + sign, title your network location. click done, then apply.

    plugin your device, does it add a new network port to the list on the left of the network preference panel.

  8. 0

    Andy Geach

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    No, it does not

  9. 0

    Tim Haigh

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    On the jtrak faq it states

    Which adapters are required?

    JTrak supports following USB to IrDA adapters for your Macintosh:

    A list of tested adapters:

    * by Extended Systems: XTNDAccess IrDA USB (ESI-9685)(VendorID:0x8e9;ProductID: 0x100)

    * by KC-Technology, Inc.. KC-180 USB IrDAdevice (VendorID: 0x50F; ProductID: 0x180)

    * UWATEC-Lipstick (golden Edition) SigmaTel, Inc. (VendorID:0x066f ProduktID: 0x4210)

    more adapters:

    * by ACTiSYS Corp.: ACT-IR2000U FIR-USB Adapter (VendorID: 0x9c4; ProductID: 0x011)

    * by IBM Corp.: IBM UltraPort IrDA (VendorID: 0x4428; ProductID: 0x012)

    You also said there was a dmg installer did you try installing that?

  10. 0

    Andy Geach

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Yes

  11. 0

    Tim Haigh

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Then this is all the help I can give as I dont have a device to test.

  12. 0

    Andy Geach

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Sure, thanks for your efforts

  13. 0

    Juliodga

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hi,

    I have same problem. After buying the IrDA from UWATEC, I realized it does not work in the Mac intel. It is only useful with the old microprocessor.

    I could not find (Paris) any IrDA that works with my MacBook. If you have any news please let me know. Thank you and good dives.

    Julio

  14. 0

    Tim Haigh

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I just saw MacDive on version tracker. This software seems to support a dozen devices that work with a mac.

  15. 0

    Juliodga

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    The software of UWATEC (JTrack) works without any problem. The problem is that you need an IrDA to connect the dive’s computer with the Mac and nobody knows where to get it.

    Julio