Benches macOS

5

Network Setup Assistant

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

I've recently upgraded to Leopard and have had problems with the system receiving the internet from the router despite excellent signal strength. This evening I reset my router, deleted all airport keychains, and set up a new wireless network using WPA personal (TKIP). I shutdown everything the allowed the router and modem to be unplugged for 5 minutes. I plugged in modem, all lights on. Plugged in router, all lights on. Started up my MacBook.

I decided to try the network setup assistant because I thought this might help. I found my secure network, entered the password, and the next screen says "ready to connect?" I click continue and the assistant gives me an error stating 'configuration failed' 'your computer could not connect to the internet, click go back and try again'

Here's the thing. My Wii is on the internet right now, so I decided to leave the assistant open and click Safari. The apple startpage opened immediately, in fact I am posting this message using my wireless network and despite trying the assistant again it still says configuration failure.

So far the only success I've have using airport wirelessly with Leopard has been with a fresh router setup, but the first time I woke up despite excellent signal strength the internet was never found wirelessly again until today. I am curious what in the programming of the assistant causes it to say failure, and I am not holding my breath for this setup to work in the morning. My wife is mad at me for being an early adopter of Leopard so I really hope this gets fixed soon.

Linksys Router WRT54Gv4 (most current firmware)

WPA Personal TKIP security

Mac Address Filtering Enabled

5 replies

Sign in or join Beachball Help to reply.

  1. 0

    LarryHN

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Erik has the solution for you! It will absolutely fix your internet access and save your marriage 🙂

    Try Erik's solution - it fixed internet access for me -- in this thread --
    http://discussions.apple.com/thread.jspa?threadID=1225208&tstart=0

    Larry:
    In my case, this is an issue with the DNS Server. In my set-up, I had a G5 with intermittent access, and a MacBook Pro & iMac G5 with no problems. There is only one difference in the configurations. The MBP and iMac had additional DNS addresses added into their network configuration from my last ISP. I had manually entered them, and never removed them. When I added the same DNS Servers to the G5, problem solved. When I removed them from the MBP, problem appears. This was not an issue in Tiger, and although I'm not sure why, I have determined a few other workarounds and contributors.
    First, in the Network Preferences, you can hit the Advanced... button and click the DNS tab to see your DNS Servers. Likely, you only see 10.0.1.1 or something similar which means the computer is getting DNS info (routing to internet servers) based on what the Airport Extreme/Express or other wireless router is sending through DHCP. If you have the actual DNS Server addresses from your ISP (or any ISP) you can add them here and probably fix your problem. Add them and click OK, followed by Apply.
    Now to the root of the problem in my case. By opening the Airport Admin Utility, and selecting my base station and clicking on the Internet tab, I can see that my Base Station is serving up two DNS Servers. One is it's own router number which falls into the 192.168.xxx.xxx range. I know this isn't a valid number. The second is the actual number from Cox (my ISP).
    So when the computer relies on DNS info delivered through Airport using DHCP, it is getting a bogus number first, but it keeps trying. Eventually, it might look at the 2nd option, which explains the delays. If you enter the DNS info directly into the System Preferences, it seems to ignore the DHCP version and go right to the site you want.
    Check with your ISP for a list of DNS Servers. Any server will work, just be sure it is from a reputable source. If your Airport shows two servers like mine, use the Network Utility to do a look-up on the non-192.168 number and see if it comes back as your ISP. If so, then you can probably just insert it as the first server on the Airport or add it to the Mac with the issues.
    I hope this makes sense and addresses your issue. It sure did help with mine.
    Erik

    Larry Nebel

  2. 0

    Tom Riddle

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Alright so I turned my computer on this morning after a fresh power cycle of the router/modem and Airport automatically joined my wireless network... despite the assistant claiming failure last night. I checked the DNS info under network preferences for Airport and they are both coming from Comcast and not from the router. I will have to see how long this connection lasts but if I do get dropped I will see if anything with the DNS servers has changed. I'm pretty excited that it joined the network without a fresh round of Setup Assistant.

    Thanks for the help

  3. 0

    Tom Riddle

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Day three and wireless is still working. I always perform a power cycle on the router/modem before starting my MacBook. Then upon startup it finds my wireless network. So as far as I am concerned the only problem is that the network setup assistant says configuration failure (APPLE NEED TO FIGURE THIS OUT). When it says failure the AirPort signal bars display four black for an excellent signal.

    **Also using the assistant my wife was able to connect wirelessly at a local coffee house, so as far as I am concerned the upgrade problem is fixed**

    Here is a summary of what worked.

    -Keychain update downloaded

    started up in safe mode just to be sure

    -hard reset of router

    -deleted all previous keychains related to airport

    -plugged into the router I entered a new configuration using WPA Personal security, and MAC address filtering, and a hidden SSID.

    -Computer Shut down

    Power cycle router/modem

    -Turned on computer

    - From airport signal(gray) in top bar i clicked open network preferences and 'assist me' to open assistant. I followed the assistants steps to connect to my new wireless network and despite it saying failure, the gray bars turned black and the internet was found. SUCCESS.

    THIS HAS WORKED FOR THREE DAYS

  4. 0

    Tom Riddle

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Day three was great until the computer went to sleep. The signal strength was excellent yet no internet could be found. Also I shut down computer and power cycled the router/modem and still NO WIRELESS INTERNET CONNECTION. I've compared the settings under Network in system preferences and nothing appears different, yet despite excellent strength (and an automatic connection to my network even though configuration failed) there is no wireless internet. Back to the drawing board.

    Please Apple Engineers, fix this

  5. 0

    Tom Riddle

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    10.5.1 update

    installed update, still excellent signal strength but no internet over WPA personal network

    SOLUTION

    deleted all airport keychains

    hard reset of router

    configured router for WEP 128 bit & Mac Address filtering & No SSID broadcast

    Power cycled modem and router

    Started MacBook

    Clicked Airport Icon in menu bar and choose Join Other Network

    Typed in Network name and password, and checked box to remember this

    Connection was established and WIRELESS INTERNET WORKING FINE

    I lost signal once due to two cell phone conversations but with a power cycle of router/modem and a turn airport off/turn airport on, the network was joined and the internet is found once again.

    From reading other posts it sounds like WPA2 is superior to WEP but until those issues are resolved I'll stick with what works.