To put a home router into Bridge mode you need to turn off DHCP and NAT.
NAT provides your home routing. DHCP provides local IP addresses for your home systems that are routed by the NAT server.
I do not know how to disable NAT and DHCP on a D-Link. A Google Search would most likely find instructions or that. But I am sure you would do this through your web browser via the D-Link admin interface.
Instead of using DHCP I think I have to use a static IP address in the D Link
With the router in bridge mode you are talking directly to your ISP. Most ISP at this level have their own DHCP servers and assign you an IP address (which is why in bridge mode you need to turn off your home router's DHCP, otherwise your ISP is going to get really annoyed with you if you start to issue IP addresses in conflict with their DHCP server).
So I do not think you need a fixed IP address. At this level any fixed IP addresses need to come directly from the ISP, and they often charge more for a fixed IP address. Sometimes they offer fixed IP addresses with business accounts.
But I do not think you need a fixed IP address, you just need to get your address from your ISP's DHCP server. This is what your D-Link has been doing, only now you are going to make your Mac visible to your ISP and it will hopefully its DHCP server will assign your Mac a IP address.
I have never tried to use a home router in bridge mode
AND have it connected directly to the ISP. This is why I am not sure if it will work.
Where I am concerned is whether your D-Link will also request an IP address, thus having your home requesting 2 IP addresses. Most ISPs charge more if a home user wants more than 1 IP address.
NOTE: I DO NOT KNOW if your router in bridge mode will ask for its own IP address.
I need two computers to be able to connect wireless network. Are you saying that's not possible in bridge mode?
Your ISP is generally selling your 1 IP address. If you need multiple IP addresses, they generally charge more. NOTE: I do not know if this is your ISP's policy, but it is common practice.
If the router is not acting as a firewall, is my computer less secure?
Before the router was blocking in-bound probes from bots and other nasties on the internet. Now your Mac will have to do that. So enabling your firewall would be a good idea.