Wireless N and County Code mess with SL
Imported from the Apple Support Forums via the Wayback Machine 🔗
It took me a while to find out what was causing my Wireless N connection problems using 10.5.8 Leopard, and now with Snow Leopard. It seems that somehow the Airport Card Country code (and therefore the supported channels and frequencies) changes with the associated MAC Address (or some other serial number that Apple can tell where the AP should be from) of the Connected Access Point. I know this because when my Airport is disconnected it shows me no Coutry Code. When I connect in my wi-fi college it shows me US country code, and at home (using a WRT610N), a different one that's unable to use wireless N frequencies. Am I the only one having this problem? I don't want to use Wireless G, and I have no idea how to fix this!
Here's what appears in my 17" mid-2009 MBP info:
PS: My WRT-610N is set to work with .N connections only, both 2.4 and 5GHz. So my MBP won't connect at home because the Country Code it sets doesn't support .N.
@ Home (WRT610N)
Software Versions:
Menu Extra: 6.0 (600.22)
configd plug-in: 6.0 (600.27)
System Profiler: 6.0 (600.9)
Network Preference: 6.0 (600.22)
AirPort Utility: 5.4.2 (542.23)
IO80211 Family: 3.0 (300.20)
Interfaces:
en1:
Card Type: AirPort Extreme (0x14E4, 0x8D)
Firmware Version: Broadcom BCM43xx 1.0 (5.10.91.19)
Locale: FCC
Country Code: ZW
Supported PHY Modes: 802.11 a/b/g
Supported Channels: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13
Wake On Wireless: Supported
Status: Not Associated
@ Airport without any wi-fi connection
Software Versions:
Menu Extra: 6.0 (600.22)
configd plug-in: 6.0 (600.27)
System Profiler: 6.0 (600.9)
Network Preference: 6.0 (600.22)
AirPort Utility: 5.4.2 (542.23)
IO80211 Family: 3.0 (300.20)
Interfaces:
en1:
Card Type: AirPort Extreme (0x14E4, 0x8D)
Firmware Version: Broadcom BCM43xx 1.0 (5.10.91.19)
Locale: FCC
Country Code: X0
Supported PHY Modes: 802.11 a/b/g/n
Supported Channels: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165
Wake On Wireless: Supported
Status: Off
@ College
Software Versions:
Menu Extra: 6.0 (600.22)
configd plug-in: 6.0 (600.27)
System Profiler: 6.0 (600.9)
Network Preference: 6.0 (600.22)
AirPort Utility: 5.4.2 (542.23)
IO80211 Family: 3.0 (300.20)
Interfaces:
en1:
Card Type: AirPort Extreme (0x14E4, 0x8D)
Firmware Version: Broadcom BCM43xx 1.0 (5.10.91.19)
Locale: FCC
Country Code: US
Supported PHY Modes: 802.11 a/b/g/n
Supported Channels: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165
Wake On Wireless: Supported
Status: Connected
Current Network Information:
USPnet:
PHY Mode: 802.11g
BSSID: 0:5:9e:8c:b4:ed
Channel: 6
Network Type: Infrastructure
Security: None
Signal / Noise: -72 dBm / -89 dBm
Message was edited by: andre.mengatti
15 replies
Sign in or join Beachball Help to reply.
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0