Problem connecting to my Windows (SMB) sh…
apple Verified ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hello all,
My Windows shared folders worked fine in Leopard but seem to be broken in 10.6 - if I do a Go -> Connect to Server... in finder and put in: "smb://192.168.10.7" I get "Unabled to connect to server, check the server name or IP and try again"
The weird thing is, it appears in Finder under the Shared section, and I can't login through there either. It just hangs on "connecting" forever.
Any ideas? Thanks!
15 replies
Sign in or join Beachball Help to reply.
- 0
Reenstrømen ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
same problems different (server)systems
http://discussions.apple.com/thread.jspa?threadID=2132152&tstart=0
and
http://discussions.apple.com/thread.jspa?threadID=2141237&tstart=0
Message was edited by: Reenstrømen
- 0
sb32 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Since upgrading, I am unable to rename subdirectories located on samba mounts..
Edit: created new post -
http://discussions.apple.com/thread.jspa?threadID=2155963&tstart=0Message was edited by: sb32
- 0
Badler050 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
exact same problem here. any help would be greatly appreciated. work find before. id simply got to connect to server and have the following typed in smb://192.168.1.101/f and then it would ask for user name and password and it would connect. since upgrade it wont. trying to connect to windows 7 machine
- 0
Don Lozz ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Do any of you have the Firewall turned on, on your Snow Leopard Macs? I found that there is a bug in the firewall preventing you from connecting to windows shares and setting up windows printers. Try turning the firewall off and try connecting to you windows boxes again. It should work.
- 0
brian.coates ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I think I may have found the culprit - System/Library/CoreServices/
NetAuthAgentAdd that app to your firewall exceptions list and you can have both Windows SMB and your firewall. At least it worked for me...
- 0
gambideluxe ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
The Problem was that I from now on have to specifiy the right server where my user account exists.
this user:
gambideluxe
becomes
this user:
companyservergambideluxethis may helps in some cases.
Message was edited by: gambideluxe
- 0
CKTaylor ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
This solution does not work for me. Keep getting the message "Invalid user name or password". Tried it also using a guest account with the same results. Server is a Windows2000 machine, connection is via SMB. This is a real problem.
- 0
JasonM ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I just wanted to throw my hat in the "samba shares do not work in 10.6" ring also...
MacBook Pro will not connect to our company samba shares. I do not have another machine freed up yet to test another system so I do not know if this is an irregularity with the MBP or not at this point.
Normally, we could always use the smb://servername.domain/sharename approach to get things working fine. However, this no longer works and only gives the standard "You entered an invalid username or password" error.
I tried disabling the firewall and also tried disabling IP6, but neither fixed things so far. I also tried changing the username to the full companyserverusername login and no luck there either.
I will post anything else I run into if I find out something new.
- 0
adijk ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Regarding the samba shares, I had the same problem. After adding 'public = yes' in the smb.conf for the share i wanted to connect to, on a FreeBSD box, my problem was solved...
Hope this helps,
Regards
- 0
drekka ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Same issue here. Setup:
MacBook Pro 17"
DLink DNS-323 NAS.Tried to connect and every attempt I get told I have an invalid username or password.
Activated a guest account on the NAS and can get in no problems.Still trying to figure this out.
- 0
drekka ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I've currently got the NAS connected to the ethernet port directly because I was transferring some large files and wanted speed. By default the DLink sets itself up with 192.168.0.32 as an IP. So i've been connecting to that. Here's what I do:
1. Click menu Go - Connect to server ...
2. enter smb://192.168.0.32 as the server.
3. enter the user name and password I've been using.
4. Select the smb directory I want.
5. At this point SL throws a userid password error.I'll also add that previous to the 10.6 upgrade, I had my password for the NAS in my keychain and after the 106 upgrade it stopped working.
Could this be something to do with encryption? Just a thought.
ciao
Derek - 0
gambideluxe ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
That's the same what I experienced.
Try this:
1. Click menu Go - Connect to server ...
2. enter smb://192.168.0.32 as the server.
3. enter the *192.168.0.32user name* and password I've been using.
4. Select the smb directory I want.
5. At this point SL throws a userid password error. - 0
Dean Knowles ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hi
I loaded last night SL and have no issues. I had some minor problems as mentioned here but it was OK will both my Windows PC's one with XP and the other with Vista
There was another post on a solution that also worked fine which was
1. Find actual Computer name of the Windows PC by right click on ->My Computer then slect properties to locate computer name
2. Then CMD+K in finder
3. Type "smb://[computer name]:139" then hit the "+" key on right to add to your listI assume 139 (or 193 I cant remember which)is a port, but then before this I use to get the IP Address in finder, but now get the Computer Name,
Both ways work fine with IP or not
Dean
- 0
drekka ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Haven't tried specifying a port. However ... I just got it working. I telnetted into the DLink and changed it's security setting from SHARE to USER. I read another posting that tried this. It worked for me. Will have to look up exactly what this does at some stage 🙂
I'f off to figure out why my Canon printer driver has disappeared 😟
Thanks for your help.
ciao
derekMessage was edited by: d4rkf1br3
- 0
Jamie Kelly ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hi everyone,
Same problem here, installed Snow Leopard over the weekend and only discovered this show-stopper this morning as I tried to login to sharepoints here at work (Monday mornings hey 🙂
Seems the problem is DNS related; if you set your DNS settings to use a specified DNS server like OpenDNS, the problem goes away;
https://www.opendns.com/start/device/apple-osx-leopard
This bug didn't let me connect to Macs or PCs on the Windows network in the office. You can connect if you type the raw IP address into the Connect to Server command. But you cannot use the Sidebar to connect.
It has something to do with Windows Reverse DNS lookup not working from what I can tell. By specifying OpenDNS this bypasses the bug.
Please fix ASAP!
Regards,
Jamie