Imported from the Apple Support Forums via the Wayback Machine 🔗
AirPort Utility/Manual Setup/Advanced/Statistics/Logs and Statistics/Wireless Clients
If you don't see that, make sure Allow SNMP is on in
AirPort Utility/Manual Setup/Advanced/Statistics/
0
Matt Clifton·
Imported from the Apple Support Forums via the Wayback Machine 🔗
One way is through Airport Utility. Click on your Airport device on the left, go to the Base Station menu, click Logs and Statistics, and go to the Wireless Clients tab. You'll see clients listed by MAC address. If you're running DHCP on the Airport you'll also have a DHCP tab showing IP addresses of clients.
Matt
0
Barney-15E·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Depends on what you mean by who.
Who being computers or who being users.
In Airport Utility, Summary, you can click on the "Wireless Clients" label and it will display the connected Wireless clients by MAC address.
In Terminal, type the command, who to show which usernames are logged into your computer.
Edit: I forgot about File Sharing Users. I'll have to do some research to figure that one out.
Message was edited by: Barney-15E
0
Verzig·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Thank you all.
I didn't know about SNMP.
I found this:
"You can choose to allow SNMP on the wide area network (WAN) port by selecting the "Allow SNMP over WAN checkbox." Allowing SNMP over the WAN port lets you mange your base station remotely."
Remotely means over the internet? I didn't get it.