Benches macOS

12

After update, system will not stay asleep.

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

I did the update in the suggested manner, and now I find that the system will not stay asleep for more than a few hours. Console says "Wake reason = EHC1 EHC2."

Does anyone have a clue as to what is happening? I didn't do this before the 10.5.6 update.

Griff

12 replies

Sign in or join Beachball Help to reply.

  1. 0

    FeSo

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Exactly the SAME thing here...

  2. 0

    FeSo

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Console:

    22/12/08 18:55:54 kernel sleep

    22/12/08 18:55:54 kernel Wake reason = EHC1 EHC2

    22/12/08 18:55:54 kernel System Wake

    22/12/08 18:55:54 kernel Previous Sleep Cause: 0

    22/12/08 18:55:54 kernel USB (EHCI):Port 2 on bus 0xfa connected or disconnected: portSC(0x301002)

    22/12/08 18:55:54 kernel AirPort: Link Up on en1

    22/12/08 18:55:54 configd[14] AppleTalk startup

    22/12/08 18:55:59 kernel AppleYukon2: 00000000,00000000 sk98osx_dnet - recovering from missed interrupt

    22/12/08 18:55:59 configd[14] AppleTalk startup complete

    22/12/08 18:56:06 kernel AppleYukon2: 00000000,00000000 sk98osx_dnet - recovering from missed interrupt

    22/12/08 18:58:12 com.apple.launchd[1] (com.apple.backupd-wake[2644]) Exited with exit code: 1

  3. 0

    Daniel Ebeck

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Sounds like you are getting wake events from USB devices.

    Try trashing the files at

    /Library/Preferences/SystemConfiguration/com.apple.PowerManagement.plist

    and

    /Library/Preferences/SystemConfiguration/com.apple.AutoWake.plist

    If you don't have an Autowake file, you can create one by scheduling a start in the Energy Saver prefs. Just make an event and then remove it.

  4. 0

    Merged Content 1

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    OK, I think I have it solved. For some reason installing 10.5.6 toggled the "wake when modem detects a ring" setting in Energy Saver back on. I had set it to off, but I guess the installer in its infinite wisdom considered this incorrect and turned it back on without notifying the administrator.

    Griff

  5. 0

    FeSo

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Where I find this option in my MBP?

  6. 0

    mikawber

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I'm getting this same message. I noticed it after my Macbook stopped going to sleep. Does anyone know if these are related issues and if there's anything to fix it? I've tried resetting the SMC and the PRAM but neither have worked. I bought the Macbook just a week after they were announced and this issue just started happening last night. Please help! Thanks

  7. 0

    andreidragan

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hello, I had the same problem. Today I tried "going to sleep" again and it worked.

    The only relevant thing I did today was installing the "iousbfamily327.4.0log.dmg" file downloaded from developer.apple.com (search for "IOUSBFamily.kext 3.2.7")

    I initially installed the file "IOUSBFamily.kext 3.1.5" for Leopard 10.5.5 a few days ago. I also had problems when inserting a USB mass storage device (I got a "blue screen").

    Now, after I installed the USB debug kit for 10.5.6, my MacBook Pro goes to sleep again. Please write if this solution worked for you!

  8. 0

    j0ni

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Mine wakes up instantly, even after removing all my USB devices. Same console log message.

  9. 0

    willnavidson

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Just wanted to follow up to your post, this solved all my problems. I suppose we installed those drivers with similar intentions.

  10. 0

    etomlinson

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    My computer is exhibiting exactly the same behaviour as this, even after reformatting and reinstalling 10.5 and then using the combo updater to 10.5.6. (In fact, it even did it on non-updated 10.5).

    None of the solutions on this thread have worked for me.

    I have no hardware connected to my Mac except for the power cord.

  11. 0

    grijspetje

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hi,

    I just found out that this problem disappeared when I removed the Xpress card (12-in-one) from Sitecom

    Hope this will give some clues to others.....

    Peter

  12. 0

    Dale Weisshaar

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    A number of sleep-related issues can appear after incremental Mac OSX updates, including the inability to properly go to sleep, problems waking from sleep, and having your display go to sleep without your Mac going to sleep. The most common culprit is Bluetooth. Try these tips to fix your sleep problems.
    WAKE UP
    In System Preferences>Bluetooth, uncheck Allow Bluetooth Devices To Wake This Computer. If you are using a Bluetooth mouse and keyboard, you'll have to wake your Mac by pressing the power button.
    FILE CORRUPTION
    Your Bluetooth preference file may be corrupt-you'll need to delete it. Turn Bluetooth off, then go to the /Users/user name/Library/Preferences folder. Look for a file called com.apple.Bluetooth.plist and trash it.The OS will create a new preference file when you enable Bluetooth again.
    ENERGY SAVER
    If you have issues with a Mac or display that goes to sleep at inappropriate times, you may have a problem with Energy Saver. Delete the following .plist files and restart:

    -/Library/Preferences/SystemConfiguration/com.apple.PowerManagement.plist

    -/Users/username/Library/Preferences/com.apple.systemuiserver.plist--
    (username is your name or System Administrators name)

    -/Library/Preferences/SystemConfiguration/com.apple.AutoWake.plist
    A restart is very important after deleting these plists. After a reboot your Mac will then generate new ones.

    Some, in these forums, have had luck fixing sleep issues downloading the Combo update from this site (yours may be corrupt), not Software Update, disconnect all firewire + USB devices except keyboard + mouse, Repair Permissions, re-install update, Repair Permissions again + try.
    DALE