Imported from the Apple Support Forums via the Wayback Machine 🔗
I've been having no luck getting a full backup with Time Machine. At one time was working but then things just fell apart. I've done the reformatting correctly but things always seem to hang and nothing in the log. Now it started at 6:22 PM and at 10:21 PM I'm only at 6.7 MB of 198.45 GB backed up using FireWire (cable is good). Here is the log below ... normally this would take only minutes ... what could be wrong? Backing to a 1 TB La Cie from the Apple Store with a 599 GB partition for the iMac backup. The remaining partition has not been used.
Oct 4 18:22:40 Barry-Kanes-Computer-761 /System/Library/CoreServices/backupd[3716]: Backup requested by user
Oct 4 18:22:40 Barry-Kanes-Computer-761 /System/Library/CoreServices/backupd[3716]: Starting standard backup
Oct 4 18:22:40 Barry-Kanes-Computer-761 /System/Library/CoreServices/backupd[3716]: Backing up to: /Volumes/iMac - Backup/Backups.backupdb
Oct 4 18:22:44 Barry-Kanes-Computer-761 /System/Library/CoreServices/backupd[3716]: Event store UUIDs don't match for volume: Macintosh HD
Oct 4 18:22:45 Barry-Kanes-Computer-761 /System/Library/CoreServices/backupd[3716]: No pre-backup thinning needed: 238.33 GB requested (including padding), 570.46 GB available
Imported from the Apple Support Forums via the Wayback Machine 🔗
When a bus error is received by a program it's almost always due to one of two things:
1) Disk corruption has corrupted the disk image of the application in question
2) Bad RAM
So first you may want to use Disk Utility to verify your hard drive.
You may also want to run the RAM tests on the Diagnostics disk that originally came with your machine and double check that it finds no RAM issues with your system.
0
V.K.·
Imported from the Apple Support Forums via the Wayback Machine 🔗
bnk wrote:
I've been having no luck getting a full backup with Time Machine. At one time was working but then things just fell apart. I've done the reformatting correctly
and how exactly did you format it? see this link on how to format TM drive properly.
Imported from the Apple Support Forums via the Wayback Machine 🔗
Saw the article and that's just how I formatted it. It's now 11:53 PM and it's only up to 11.4 MB of 198.45 GB. I'll be dead before this is over.
0
V.K.·
Imported from the Apple Support Forums via the Wayback Machine 🔗
well, in that case there is nothing to do but wait, I'm afraid. there is no way to speed TM up.
btw, do you use any Antivirus software? that's known to adversely affect TM.
0
bnk·
Imported from the Apple Support Forums via the Wayback Machine 🔗
No anti-virus software. I'll just have to wait and pray it actually completes. I've never had anything transfer this slowly. Thanks for the feedback.
0
bnk·
Imported from the Apple Support Forums via the Wayback Machine 🔗
This morning it's hanging at 158.95 GB of 198 GB. Nothing in the log for backupd but I not the System log is cranking out error messages since about 5 am that look like this:
Oct 5 08:06:04 Barry-Kanes-Computer-761 com.apple.launchd[1] (0x10af00.mdworker[11494]): Exited abnormally: Bus error
Oct 5 08:06:04 Barry-Kanes-Computer-761 ReportCrash[11495]: Saved crashreport to /Library/Logs/CrashReporter/mdworker 2008-10-05-080557Barry-Kanes-Computer-761.crash using uid: 0 gid: 0, euid: 0 egid: 0
Oct 5 08:06:14 Barry-Kanes-Computer-761 ReportCrash[11497]: Formulating crash report for process mdworker[11496]
Oct 5 08:06:16 Barry-Kanes-Computer-761 com.apple.launchd[1] (0x10af00.mdworker[11496]): Exited abnormally: Bus error
Oct 5 08:06:16 Barry-Kanes-Computer-761 ReportCrash[11497]: Saved crashreport to /Library/Logs/CrashReporter/mdworker 2008-10-05-080609Barry-Kanes-Computer-761.crash using uid: 0 gid: 0, euid: 0 egid: 0
Is there some other process the has run amok and is taking up all the system? Not sure what this log means.
0
Dogcow-Moof·
Imported from the Apple Support Forums via the Wayback Machine 🔗
When a bus error is received by a program it's almost always due to one of two things:
1) Disk corruption has corrupted the disk image of the application in question
2) Bad RAM
So first you may want to use Disk Utility to verify your hard drive.
You may also want to run the RAM tests on the Diagnostics disk that originally came with your machine and double check that it finds no RAM issues with your system.
0
bnk·
Imported from the Apple Support Forums via the Wayback Machine 🔗
All disk utility tests show all is fine. I ran the HW test a few months ago and RAM was good but I'll rerun and check once this finishes (if it ever does! ... only at 159 GB now). I have 1GB of Apple RAM that came with the machine (2 chips).
0
oemb1905·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Same problem all time. Checked all the above, and cables, and dusted, cleaned, purchased new, continually reformat and startover just in case, and nada - it always crashes on 100 gb and above, and often hangs irrecoverably on 10.32 GB for many ...
0
johninCLT·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Folks, I'm new to discussions but have used Mac's for 18 years. I just hooked up a new USB 2 backup drive to my G4 PowerBook running 10.5.5 and after 3 DAYS of trying to get the first Time Machine backup to work, I just came across a posting on another site that suggested putting the Time Machine disk into the "Privacy" folder in Spotlight preferences. It worked. The last few GB of data completed in 3 minutes. Try It!