Benches macOS

15

"You cannot install Mac OS X on this volu…

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

So i logged in to 10.4 on my Macbook Pro and popped in the Leopard Install Disk. I pressed install Mac OS X or whatever, it started up fine, then when i got to the 'Select Destination' page it says my HD isent capable of installing Leopard. Ive restarted several times while pressing C and repaired permissions on my disk and everything, but i still get the same message, my hard drive with a little exclamation point next to it.

Someone please help me out. Thanks

15 replies

Sign in or join Beachball Help to reply.

  1. 0

    Tony Piper

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I had this. My internal hard disk was formatted with an Apple Partition Table, not a GUID Partition Table, so Leopard refused to do an upgrade.

    To check whether this is the case for you, launch Disk Utility, select the internal hard disk in the list of disks on the left hand side and look at the bottom right corner: if you've got the same problem I had, the 'Partition Map Scheme' field will say 'Apple Partition Table'.

    I had backed up with SuperDuper, so booted from the SuperDuper disk and repartitioned and reformatted the internal hard disk, and then restored from the SuperDuper disk to the internal disk using Disk Utility.

    After that, I rebooted with the Leopard install DVD and a simple upgrade install went fine.

  2. 0

    thormcse

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I just installed on my Macbook. When the dvd boots up look up at the top and there is a menu. Choose utilities then disk utility from there. You will have to erase your current partition then create a guid partition. Then you can install just fine.

  3. 0

    Guy Mancuso

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Having the same issue here . I am cloning to a external than format the drive than start all over again. I screwed up when I installed this HD in my MPB I used Apple instead of Guid

    Just a pain now

  4. 0

    Khase Wilkinson

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I'm having the same problem. What is a guid partition?

  5. 0

    twincities1

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    That's just insane. I installed on my MacBook Pro and no problem. Will not install on iMac because of the disk format -- I was never aware either were formatted differently, but guess so. I have never had to erase and reformat a HD to install an OSX update before. What a hassle.

  6. 0

    nerowolfe

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I don't think Apple pointed out in their system requirements that the disk format had to be anything special.

    Here's what they say:

    General requirements
    Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor

    Nothing about HD format.

  7. 0

    Alexander Newman

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Thanks for the heads-up, Tony. I'm glad I wasn't one of the early adopters this time!

  8. 0

    Some Name

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I'm having the same issue but in a G5 Power Mac. I am running a two disk Raid 0 (striped) I don't see the partition table info you were talking about.

    This is what I do see.

    Disk Description : Apple RAID

    Total Capacity : 596.2 GB (640,144,703,488 Bytes)

    Set Name : raid0

    RAID Status : Running

    Type : Stripe

    Number of Slices : 2

    Or

    Mount Point : /

    Capacity : 596.2 GB (640,144,703,488 Bytes)

    Format : Mac OS Extended (Journaled)

    Available : 574.4 GB (616,804,159,488 Bytes)

    Permissions Enabled : Yes

    Used : 21.7 GB (23,340,544,000 Bytes)

    Number of Folders : 49,452

    Number of Files : 188,241

    I tried all three install options and even the erase failed. Ran the disk repair multiple times - all OK. The message I am getting says that it can't make my volume bootable. I have a ticket open with Apple support but 1st couldn't solve it. I have to talk to 2nd level tomorrow to see if we can get anywhere.

  9. 0

    Jeff Greenberg

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Some Name wrote:

    I'm having the same issue but in a G5 Power Mac. I am running a two disk Raid 0 (striped) I don't see the partition table info you were talking about.

    Which RAID version do you have? My G5 was a striped RAID version 1 and Leopard would not install. I backed it up, erased it and remade it with the latest Disk Utility. It now shows up as Apple RAID version 2 and Leopard is installing as we speak.

  10. 0

    Mitchell Harris

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Could Carbon Copy Cloner be used for the same purpose--i.e., has anyone used it to backup a drive and restore it to a different partition in order to meet the (unpublished) partition requirements?

    I'd like to avoid purchasing an additional license (for Super Duper) to complete my upgrade if it can be avoided.

  11. 0

    Tony Piper

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Carbon Copy Cloner is often mentioned in the same sentence as Super Duper, though I've not used it... the good news is that Super Duper has a 'free' mode, which will be more than adequate for cloning your internal disk and then restoring it after you've repartitioned...

  12. 0

    Some Name

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I can't find it now but I am pretty sure it is Apple RAID 1. I suspect I will have to wipe to be able to install at this point. Fun I did list last weekend because of a bad HD.

  13. 0

    infobhan

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I had a problem with the RAID being an issue as well. I had to actually take the RAID out of my system (take the drives out) to get a successful install on a NON-raid drive. I just remade the RAID with Leopard and I'm cloning my single-drive version back onto the RAID to see if it works. Will update.

  14. 0

    Some Name

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Had to boot off of my 10.3 CD then erase and destroy my old volume. Then booted off of 10.5 dvd and made new raid volume. All good now.

    Make sure to back your stuff up.

  15. 0

    infobhan

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I successfully updated a single-drive backup, recreated my RAID with the newer Disk Utility, and restored onto the RAID using Carbon Copy Cloner. Looks like the old version RAID is the problem.