Blue screen after install!!!!!!!!! Help
apple Verified ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hi I have just installed tiger on my G4 ibook, After installation the ibook turned itself of to restart then i got the apple logo and spinning logo, After that the screen went blue, And now it will not start up,?
15 replies
Sign in or join Beachball Help to reply.
- 0
a brody ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Did you backup your data before installation?
- 0
Tobyhead ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Yes i did, When i press the on/off button i get the grey screen with apple logo the n, the spinning shpear, then the screen goes blue, And stays blue, All i can do to turn it off is hold down the on/off button again, thank You
- 0
a brody ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Try using the startup manager to boot your 10.4 installer disc and repair the directory*:
http://www.macmaps.com/directoryfaq.html
- * Links to my pages may give me compensation.
- 0
Tobyhead ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Ok so i tried disk utilitys repaired the disk it told me no repairs were nesercery, I then tried a complete new install of tiger erasing everthing on the hard drive, But half way through it froze and crashed!!!!!!!!!!!!! Had to use finger on the power switch to shut down !!!!!!!!!!!!!!!!!!!!
Help
- 0
a brody ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I didn't tell you to do an erase and install. That was premature. However, it does reveal the fact you had a hardware problem, assuming you used the correct discs. You should only use the discs that came with the Mac, or newer retail discs. You should not use the discs that came with another Mac. If you used the correct discs, you definitely have a hardware issue. If no non-Apple hardware was attached, that hardware issue was inside the machine somewhere.
- 0
Tobyhead ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
How do you think i can find out what hardware is at fault? Do you think it needs a new harddrive? Thank You for you help
- 0
a brody ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Did your machine come with a hardware test disc?
- 0
Tobyhead ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I have all the original disks that came with the ibook when i bought it,
- 0
a brody ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Then test it with the hardware test that came with it.
- 0
Mad Maxx ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
The blue screen error could of possibly been system error. This happened to me on 10.0 panther four years ago, and it turned out that there were two system folders. I believe that there must be some confusion on the systems part, and that booting up from 9.x (classic os 9) on an external hard drive or something else would give you a chance to backup your data or have a genus bar person fix the error since the ownership and permissions property is different on mac os 9.
But if you ever get that screen again.....try this.Classic environment only works with intel based macs.
Classic works with your computer (your g4 ibook) - 0
a brody ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Classic environment only works with intel based macs
That is incorrect. Classic environment doesn't work at all with Intel Macs.
It works with all G4s and G5s, not running 10.5 or later. If they are running 10.5 or later, they can have a separate partition or separate Firewire or internal hard drive running 10.4.11 to get Classic.
Booting into Mac OS 9 works with pre-2003 G4s and G3s, except for the non-Firewire 800 MDD PowerMac G4 which was available new after 2003 began. If the Mac was capable of booting Mac OS 9 earlier, and was 867 Mhz or faster it can also dual boot Mac OS 9 and Mac OS X 10.5, but that does not give it same boot Classic capability under 10.5.
Intel Macs on the other hand use Rosetta to access Mac OS X PowerPC applications that are not PowerPC driver or plugin dependent.
For a full guide on what works and doesn't depending on your age of Mac see my FAQ*:
http://www.macmaps.com/macosxnative.html- * Links to my pages may give me compensation.
- 0
a brody ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
This said, iBook G4s can't boot into Mac OS 9, but can use Classic if they have a 10.4.11 or earlier Firewire hard drive or an internal hard drive partition. iBooks G3s were the last iBooks capable of booting into Mac OS 9.
- 0
Mad Maxx ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
My mistake. I ment *power pc processor.*
I think that going to the genius bar would be the best thing to do here.
Unless you have a hard drive or want to buy one, apple can boot
up your computer using their external hard drive for you.
They just might not be able to fix it as they said that to me
when I had the same problem. - 0
Tobyhead ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Ok so i ran the hardwear test and it found no errors, I then tried reinstalling the original OS that came with my ibook, The fist cd went fine but half way through the second one it crashed, Now when i turn it on all i get is the blue screen, I am now thinking that this machine is history sad to say but i dont know what else to try!!!!!!!!! Thank you for all your advice anyway
Cheers 😟
- 0
BDAqua ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
If thay's the Tiger 2 disk set...
Second install disk won't work...
There've been many reports of this, some had the disks replaced by Apple and it worked, some didn't.
A workaround is to reduce the number of Languages, Printer, Drivers, Fonts, and APPs until it no longer needs Disk 2 for the install.