Benches macOS

13

Time Machine disk not mounting after sleep

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

Greetings,

I am having a problem with the external USB disk (500GB Iomega) that I have set up for Time Machine not remounting after my iMac wakes back up. Nothing I have tried, short of rebooting, seems to cause the Mac to notice the drive. I have tried turning the drive off and back on, but that didn't work, and neither did unplugging and re-plugging the USB cable. (I suppose obviously) Time Machine won't do any backups and complains that "The storage location for Time Machine backups can't be found." Time Machine Set Up says "Next Backup: When Disk is Connected." If I reboot, the disk will show up and Time Machine will commence backups, but then, after the machine sleeps, I have the same problem again.

When I first plugged the drive in last night the computer immediately recognized it, mounted it, and asked me if I wanted to use it for Time Machine. I didn't have to do anything. I then successfully started Time Machine and it did its initial and several hourly backups as expected. Then the machine went to sleep and the disk never came back (short of a reboot).

The computer is a brand new 24-inch, 2.8Ghz, iMac with Leopard installed from the included DVD immediately after opening the box - I did nothing before installing Leopard.

This is my first Mac (I am a Unix refugee) so I may very well be doing something entirely stupid, but surely external disks should still be mounted (or automount) after the computer returns from sleep. What am I doing wrong? I also don't see any way to force Leopard to mount the drive, but I probably just don't know where to look.

To be completely clear... the drive is plugged directly into the iMac on USB, no external hub. There is no networking involved with this disk. I didn't make any kind of settings to the disk (either to the disk itself- there aren't any, or on the iMac when I plugged the disk in). The only thing I did was answer "Yes" when Time Machine popped up a window asking if I wanted to use the new disk for backups. Last time the disk was mountet (before the computer went to sleep again) I ran the Disk Utility and it said the drive was fine.

Thanks,

Mark

P.S. I'm sorry if this has been discussed elsewhere but I couldn't find it. Like I say, I'm new to the Mac and to these forums, so please forgive me if this post is redundant.

13 replies

Sign in or join Beachball Help to reply.

  1. 0

    BarryXSharp

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Mark:

    Did you format the Iomega 500GB HD to HFS+ before using it ? TM should have detected iit was not HFS+ when it first was configured to use it, but maybe it somehow didn't. Make sure the HD is formatted as HFS+. Use Disk Utility to examine the format.

    You might also try connecting to a different USB port to see if that changes things.

  2. 0

    pvonk

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    When you say TM is not "remounting" the external drive, do you mean to imply that you unmounted it at some point. When a Mac goes to sleep, it doesn't unmount drives. They should be on your desktop when the machine wakes up. Even network mounted drives remain on the desktop when the Mac wakes up.

  3. 0

    marktd

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hi,

    Yes, I believe the drive is formatted correctly. When I first attached the disk to the Mac, Time Machine formatted it HFS Extended (Case Sensitive, Journaled) and renamed it "Time Machine Backups." It didn't ask about any of this beyond "Do you want to use this disk for time Machine" or some such. I just checked, and that is indeed how it is formatted.

    I have been playing around with different USB ports with unpleasant results - I think this may be some sort of USB problem... Swapping the printer (a LaserJet) and the disk resulted in neither working, and the computer not seeing either the printer or the disk. But after a couple of reboots (and what I can only describe as crashes) it is now seeing both.

    I have turned Time Machine off for now and set it to use "None" (or whatever) for it's backup disk. I have also uninstalled the Microsoft IntelliPoint stuff for my USB wireless mouse (I don't need it, I just wanted better control over acceleration, etc.) thinking that it could be causing USB problems.

    I'll be looking into this problem more tonight and will post a followup if I have any results. All the suggestions/help I can get is much appreciated.

    Thanks,

    Mark

  4. 0

    marktd

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    pvonk wrote:

    When you say TM is not "remounting" the external drive, do you mean to imply that you unmounted it at some point. When a Mac goes to sleep, it doesn't unmount drives. They should be on your desktop when the machine wakes up. Even network mounted drives remain on the desktop when the Mac wakes up.

    No I have not unmounted the drive. The drive is mounted and usable, then the computer goes to sleep and when it wakes back up the drive is gone - not on the desktop and not listed in /Volumes, which is where I understand OS X mounts disks. The only way I can get it back is to reboot. If the computer sleeps again after that, the drive goes away again. Power cycling the drive (which I figured would work - I figured the OS would see a new thing on the bus and do something with it) does nothing.

    As I mentioned in my just-posted post in reply to another, turning off Time Machine, uninstalling Microsoft IntelliPoint drivers, swapping USB ports, and rebooting several times seems to have had some effect. I'll try to figure out, if I can, which things, if any, or combinations of things had an effect later tonight.

    Thanks,

    Mark

    Mark

  5. 0

    intelligenceresigned

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I have a similar problem. I have a 20" 2.4Ghz 3GB Ram iMac, with a 200GB Fantom Titanium External USB Hard drive that I am using for Time Machine. The HD has a blue L.E.D. on the front indicating that it is functioning. If it is not functioning, the light turns red. When my computer wakes after going to sleep, the light turns red and the HD is usually non responsive. I am still able to see the HD icon on my desk top, however if I attempt to open it or use Time Machine, my computer usually freezes. Sometimes my computer recovers and I do not need to restart. Sometimes turning off the HD solves the problem. And sometimes the only thing that will solve the problem is turning everything off. If the HD is working properly, then time machine works properly as well. The HD was originally formated with NFTS, but I reformated with HFS+ extended (journaled). I know that the HD has worked properly in the past, so I don't think that it is a problem with the HD, but I suppose it could be. The thing that confuses me is that it only happens after the comp wakes from sleeping. No other times.

    Any thoughts?

  6. 0

    marktd

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    intelligenceresigned wrote:

    And sometimes the only thing that will solve the problem is turning everything off.

    I have had the system lock hard a couple of times now and actually had to unplug/re-plug the computer to get it back.

    The thing that confuses me is that it only happens after the comp wakes from sleeping. No other times.

    Same here.

    To be extra clear, I've had the computer since I bought it new on 10/27 and it has worked perfectly, all this bother began last night when I plugged in the external drive and turned on Time Machine and installed IntelliPoint. I'm really looking forward to getting this resolved as otherwise I really like the computer!

    Thanks,

    Mark

  7. 0

    marktd

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Greetings again,

    Could someone possibly tell me if Leopard logs usb events anywhere? E.g. in Linux, the kernel logs USB events into the system log (often /var/log/messages) whenever something warrants it - like a new usb device being plugged/unplugged or turned on/off. Stuff like this:

    Oct 20 17:56:33 localhost kernel: usb 1-1.4: new full speed USB device using address 6

    Oct 20 17:56:33 localhost kernel: usb 1-1.4: Product: Nikon Digital Camera E990

    Oct 20 17:56:33 localhost kernel: usb 1-1.4: Manufacturer: Nikon

    * * *

    Oct 20 18:00:59 localhost kernel: usb 1-1.4: USB disconnect, address 6

    Does Leopard do this? If so where?

    Thanks,

    Mark

  8. 0

    marktd

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Sorry for replying to my own post, but...

    marktd wrote:

    Greetings again,

    Could someone possibly tell me if Leopard logs usb events anywhere?

    I just found the USB Prober in XCode.

    Mark

  9. 0

    intelligenceresigned

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Ok, I went into console, and forced my iMac to sleep to see what the console would show was actually happening. I am not a very computer savvy person, but this is what the console said:

    Nov 8 21:50:27 steve-freunds-computer kernel[0]: USBF: 48332.754 AppleUSBEHCI[0x52ab000]::Found a transaction past the completion deadline on bus 0xfa, timing out! (Addr: 3, EP: 2)

    Nov 8 21:50:58 steve-freunds-computer kernel[0]: USBF: 48363.754 AppleUSBEHCI[0x52ab000]::Found a transaction past the completion deadline on bus 0xfa, timing out! (Addr: 3, EP: 6)

    And it repeats these messages about every 30 seconds. Anyone have any ideas? It would be really helpful because this is totally preventing me from using my external HD.

  10. 0

    marktd

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Greetings,

    intelligenceresigned wrote:

    Ok, I went into console, and forced my iMac to sleep to see what the console would show was actually happening. I am not a very computer savvy person, but this is what the console said:

    Nov 8 21:50:27 steve-freunds-computer kernel[0]: USBF: 48332.754 AppleUSBEHCI[0x52ab000]::Found a transaction past the completion deadline on bus 0xfa, timing out! (Addr: 3, EP: 2)

    I believe this may be related to the problem. The AppleUSBEHCI appears to identify the offending driver/controller as the EHCI controller (Enhanced Host Controller Interface), or the controller that handles usb 2.0 High Speed (usually usb 1.1 and 2.0 Full Speed are handled by something that would be called a UHCI or Universal Host Controller Interface) USB High Speed is the fastest of the three usb speeds and although the interface is compatable with the slower speeds, works rather differently than the other two. Beyond that I'll have to look into what this message means (I'm brand new to the Mac - I've only had this one a couple of weeks).

    *Could others that are seeing this problem please post how many usb ports on the computer, not total devices connected to hubs or anything, but actual, physical ports on the computer that they are using?* Experimenting a little, on mine at least, I have not had the problem discussed in this thread when only two (out of the three available) of the physical USB ports on the Mac are used. Again on mine at least, it also doesn't seem to matter what, with the exception of external hubs, is plugged into the ports. Replacing the external drive with a flash drive or iPod Touch produces the same results, so it doesn't appear to have anything to do with the Iomega drive that I started seeing the problem with - it may be that that was just the third thing I plugged in (or not - I realize that I am a sample of one).

    It also seems to be that things connected to an external hub continue to work after the other two ports have failed. This is probably why most keyboards (mercifully) keep working - they are usually hubs (Apple's external ones are). I can't guarantee this however because I haven't really tested it - just observed it so far to be the case for me so far. Hubs do work differently than ordinary usb "functions" as the usb spec calls them.

    Lastly...

    If you have Xcode installed (assuming you have it installed in the default /Developer location) there is a tool in /Developer/Applications/Utilities called "USB Prober" that can provide some useful USB information.

    In my case, once a device stops working I see the status of the non-functioning devices reported as:

    High Speed device @ 2 (0xFA200000): ............................................. External HD (did not respond to inquiry - 0xe00002ed, might be Suspended)

    High Speed device @ 3 (0xFA400000): ............................................. HP Color LaserJet 2605dn (did not respond to inquiry - 0xe0004051, might be Suspended)

    And indeed the usb ports in question do appear to be behaving as if the host (the Mac) has them suspended - but I can't be entirely sure. I will try to look into this some more later if I can.

    Thanks,

    Mark

    P.S. To save questions: I've tried all the easy stuff: Switched cables, swapped out the hub I have on one of the ports, tried different devices in the ports (so far an HP printer, Iomega external disk, iPod Touch, and Sony usb flash drive). Nothing resolved the issue. My keyboard and mouse are connected to a 2.0 High Speed hub. I've tried using another hub, but it didn't make any difference.

  11. 0

    intelligenceresigned

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Mark, I am completely ignorant when it comes to the very technical jargon involved in computer language, however I did a little more research into your idea about the usb thing, and it does seem like this is the cause of many other people's problems. Any idea how to change ehci to uhci?

  12. 0

    marktd

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    intelligenceresigned wrote:

    Mark, I am completely ignorant when it comes to the very technical jargon involved in computer language, however I did a little more research into your idea about the usb thing, and it does seem like this is the cause of many other people's problems.

    Yes, I think you're right, looking around a little this evening, I've seen similar looking problems elsewhere too. I don't think our problem is unique, I think people may just be experiencing it in different ways depending on what they have plugged in. For that matter, I'm not at all sure that this is the best forum for this thread to get seen as it appears to be a much more general problem than TIme Machine.

    Any idea how to change ehci to uhci?

    Unfortunately this wouldn't be possible.

    For what it's worth, things seem to be working for me (so far) as long as I plug everything into a powered, external usb hub. (The hub needs to be powered because the Mac usb port the hub is plugged into cannot supply enough power to run the several devices plugged into the hub.) On my Mac, as long as I don't plug more than two usb devices directly into the Mac itself, things seem to work. Right now I have my external hub and a laser printer plugged into the Mac, everything else, including my external hard drive (five things in all), are plugged into the hub. If I plug a thing into the Mac, it works until the computer sleeps, and then... I don't at all consider this a solution, but so far (and that's only like a day) it has worked as a temporary work-around. If you have a usb hub (or don't mind getting one) it might be worth a try - but since I don't know why this works, I can't say with any confidence whether it will work for others or not.

    Since I've so far been unable to resolve this issue, I also asked for help on a developers' mailing list that I know usb developers at Apple read. I don't know if I'll get a response, but I'm keeping my fingers crossed.

    I'll post here with any new information I might come across.

    Thanks,

    Mark

  13. 0

    intelligenceresigned

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Yeah, I already tried the hub idea. No luck. I have replaced the cable, switched what wall socket I plug the HD into, reformatted, turned off Time machine, Etc, etc, etc. The only thing that has worked for me is to tell my computer to never sleep. I am just worried that Apple will neglect to fix this bug or try and fail. This will be a big factor in forming my opinion on Apple, especially since I am a fairly new convert to macs. I don't want to imply that I am going to hate Apple if they don't fix MY problem. It's just that I see that this is happening to so many people, so I hope Apple does something about it.

    P.S. I initially called the Apple support hotline and was on the phone with someone for about an hour trying to fix my problem. They ended up having to transfer me to an "expert" and by that time, the battery on my phone had worn out. No kidding.