Benches macOS

3

USB PCI card not working under Mac OS 9.2…

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

Q: I have installed a USB PCI card in my beige PowerMac G3 (or any other Power Macintosh computer
without built-in USB ports) running Mac OS 9.2.2, but the card is not working / not recognized by the system. What can I do?

A: This problem can be caused by the following three issues -

1.) A Mac OS installer only installs the USB extensions that are necessary to use an USB adapter card if USB ports are present on the computer
at the time of installation. This cause applies if the USB PCI card was installed
after installing the operating system.

2.) Several reports in the past have indicated that the USB extensions that come with Mac OS 9.2.2 may not always work on computers without built-in USB ports.

3.)
USB Adapter Card Support 1.4.1 is not intended for use with Mac OS 9.1 or higher, as these systems require newer versions of the USB extensions than those included in USB Adapter Card Support 1.4.1.

If the 1.4.1 USB extensions have been installed anyway, this can be the reason why the USB card is not working.

(From the ReadMe-document: "
Mac OS versions 9.1 and later include a later version of this software. Installing USB Adapter Card Support 1.4.1 over Mac OS 9.1, 9.2 or later could result in the USB adapter card not working.")

The common solution to the three issues above is to install the following USB extensions (that were included in Mac OS 9.1):

*HID Library 1.4.6

*Serial ShimLib 1.4.6

*USB Device Extension 1.4.6

*USB Mass Storage Support 2.0.9

*USB Software Locator 1.4.6

*USB Support 1.4.6

You can download these extensions
here (
direct link to download [244KB]; please see the note at the end of this document).

To install, decompress the file 'USB146.sit' (using
StuffIt Expander), open System Folder > Extensions, move any earlier or later versions of these extensions that might be present to the Desktop (you can delete them once your USB card is working) and drag-and-drop the downloaded extensions (not the entire folder) to the Extensions-folder. Then restart the computer to activate the new extensions.

Joerg

Note: The file is provided 'as is' and without warranty of any kind. Should the download be unavailable, please use
TomeViewer to extract the extensions listed above from either the
Mac OS 9.1 download update or a (retail) Mac OS 9.1 CD.

3 replies

Sign in or join Beachball Help to reply.

  1. 0

    Nicolas

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hello Joerg,

    Great posting!

    I have installed some USB cards in Beige's (from 233DT to 333MT, Rev.1, Rev.2 and Rev.3, over 20 at all).

    Some G3's (mostly when using those "cheap" PC-USB cards) needs a PRAM reset to reconize the new installed USB card.

    Other Macs with USB cards installed needs a CUDA-reset (mostly Rev.1 Beiges).

    I can't say what chipset brand in general.

    Regards

    Nicolas

  2. 0

    Joerg Weise

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Once completed, links to this FAQ should be added to these folders -

    Power Macintosh G3 (Platinum-Beige) FAQ > User-Contributed Tips & Answers

    Mac OS > Mac OS 9 Frequently Asked Questions (FAQ)

    Pre-G3 Desktop Computers > Frequently Asked Questions (FAQ)

    I would also suggest to review
    this FAQ, as it does not specify which version of Mac OS 9 it applies to. If Mac OS 9.2.2-users follow this advice, it can actually
    cause the problem rather than solve it.

    Joerg

  3. 0

    Joerg Weise

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hi Nicolas,

    Thanks a lot!

    I have added your suggestion to the final version (see below).

    Cheers,

    Joerg