Benches macOS

6

Uninstall snow leopard and go back to tig…

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

On apparently bad advice I installed snow leopard. Now my Nikon software does not work. I want to go back to 10.4.11. Do I have to erase the disk? I put the original 10.4.3 disk in, but the computer wanted to start it using rosetta.

6 replies

Sign in or join Beachball Help to reply.

  1. 0

    K T

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hi sgerding & welcome to the forums...

    Lacking a backup, you'll need to start up using the Tiger disc.

    Reboot and hold down the V key until you see icons on the screen noting which sources you can choose to boot from...select the Tiger disc and go - follow the prompts to install. Backup any data you may want to retain first.

  2. 0

    Kappy

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Yes, you will need to erase the drive and install Tiger from scratch. You may want to make a backup of your current drive just in case. I suggest cloning it to an external drive:

    Clone using Restore Option of Disk Utility

    1. Open Disk Utility from the Utilities folder.

    2. Select the
    destination volume from the left side list.

    3. Click on the Erase tab in the DU main window. Set the format type to Mac OS Extended (journaled, if available) and click on the Erase button. This step can be skipped if the destination has already been freshly erased.

    4. Click on the Restore tab in the DU main window.

    5. Select the
    destination volume from the left side list and drag it to the Destination entry field.

    6. Select the
    source volume from the left side list and drag it to the Source entry field.

    7. Double-check you got it right, then click on the Restore button.

    Destination means the external drive.
    Source means the internal startup drive.

    Since I assume your iMac is an Intel model you will have to use the original installer discs that came with the computer. You cannot use a retail copy of Tiger. To start:

    Booting From An OS X Installer Disc

    1. Insert OS X Installer Disc into the optical drive.

    2. Restart the computer.

    3. Immediately after the chime press and hold down the "C" key.

    4. Release the key when the spinning gear below the dark gray Apple logo appears.

    5. Wait for installer to finish loading.

    Extended Hard Drive Preparation

    1. After the installer loads select your language and click on the
    Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.)

    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing.
    SMART info will not be reported on external drives. Otherwise, click on the
    Partition tab in the DU main window.

    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the
    Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the
    OK button. Click on the
    Partition button and wait until the process has completed.

    After formatting has completed quit DU and return to the installer. Complete your installation.

  3. 0

    sgerding

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Thanks for your reply, although it was what I was afraid I would have to do. I have been this route before when I "upgraded" system software. I don't think I'll be doing that again soon.

    I have backed up my drive using bounceback express (which 10.6 does not recognize), so when I reinstall, I should be able to restore everything except anything saved since last night (not much). I think I will also back up to another external drive using the method you noted below, just to be safe. Even after I reinstall, I will also have to download all of the updates to get back to 10.4.11.

    Since my backup drive has everything on it prior to the SL upgrade, I suppose I could boot from it. Then I wonder if I could copy over everything to the internal drive, including the system software. any thoughts on that one?

    Any other advice would be appreciated. Nikon says they intend to upgrade some of their software to be snow leopard compatible early in 2010. I don't want to wait that long.

  4. 0

    Carolyn Samit

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    HI,

    Before you revert to Tiger, if you camera came with software, try reinstalling it.

    And try repairing disk permissions also.

    Quit any open applications/programs. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.

    Carolyn 🙂

  5. 0

    Kappy

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    If you have a bootable backup of your pre-SL system then boot from it, erase the main drive, restore the cloned backup to your main drive.

  6. 0

    donv_the_ghost

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    First, I recommend that you make a bootable clone of your internal on an external drive to serve as a backup, a fail-safe device, and a potential migration medium.

    After making the clone, I would proceed as indicated below. The goal is to minimize the probability of your Snow install having adverse effects on your new Tiger install.

    1. Start up from your Tiger install DVD by holding down c when starting up.

    2. Choose your language and use the menus at the top of the next screen to start Disk Utility. Use Disk Utility to produce a clean install by erasing your drive Mac extended (journaled). Quit Disk Utility, and continue your installation.

    3. At the end of your install, set up an administrator account on for the new installation.

    4. Set up your user accounts.

    5. Acquire [Preferential Treatment,|http://www.versiontracker.com/dyn/moreinfo/macosx/22790] and use this app to fix your Snow-clone users' preferences prior to using the guide mentioned below to migrate the user-folders items.

    5. Migrate the user folder items, including the administrator folder items, by hand [using this guide|http://discussions.apple.com/message.jspa?messageID=6185507]. Don't just copy and paste their home folders as a whole.

    6. Reinstall all apps by hand.

    7. Repair permissions when you have completed all installations.

    8. Do any remaining tidying up, e.g., re-setting prererences and re-establishing permissions when needed.