Benches macOS

6

Overriding Airport Country Code

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

I own a Macbook Pro that originally came with an 802.11 b/g card only. Being out of warrantee I upgraded the internal Airport card to one that supports 802.11 a/b/g/n. Unfortunately it is unable to connect to my router when it is set to 802.11n on channel 149 (5 Ghz set of channels).

Looking at system profiler, I see the following in the airport section:

Software Versions:

Menu Extra: 6.0 (600.22)

configd plug-in: 6.1 (610.2)

System Profiler: 6.0 (600.9)

Network Preference: 6.0 (600.22)

AirPort Utility: 5.4.2 (542.23)

IO80211 Family: 3.1 (310.6)

Interfaces:

en1:

Card Type: AirPort Extreme (0x168C, 0x1026)

Firmware Version: Atheros 5416: 2.0.19.4

Locale: Unknown

Country Code: JP

Supported PHY Modes: 802.11 a/b/g/n

Supported Channels: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 34, 36, 38, 40, 42, 44, 46, 48, 52, 56, 60, 64

Status: Connected

Current Network Information:

I don't live in Japan. I live in the US, so the country code isn't being set correctly. Looking on the forums I see that 802.11d beacons could be setting my country code incorrectly. However, I don't think that is the case since there is nothing in my system log saying that it received an 802.11d beacon and I took my laptop to another neighborhood to see if the country code is updated. From my logs:

bash-3.2# grep en1 /var/log/system.log /var/log/kernel.log | grep -v "Link" | grep -v "handshake"

bash-3.2#

The grep -v's remove the RSN handshake and the Link status change lines from the logs.

My question... Is there any way to override the Country Code in Snow Leopard manually?

More info about my system:

Hardware Overview:

Model Name: MacBook Pro

Model Identifier: MacBookPro1,1

Processor Name: Intel Core Duo

Processor Speed: 2.16 GHz

Number Of Processors: 1

Total Number Of Cores: 2

L2 Cache: 2 MB

Memory: 2 GB

Bus Speed: 667 MHz

Boot ROM Version: MBP11.0055.B08

SMC Version (system): 1.2f10

Serial Number (system): <snip>

Hardware UUID: <snip>

Sudden Motion Sensor:

State: Enabled

Thanks in advance,

Scott

6 replies

Sign in or join Beachball Help to reply.

  1. 0

    K T

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Seen this?

    http://www.xlr8yourmac.com/systems/macbookprowireless_N_upgrade/macbookpro_N_cardinstall.html

  2. 0

    scottsavarese

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Which part of the article are you referring to? From the article it says that those with Leopard do not need to install the enabler software. It also says that the upgrade isn't supported by Apple, but I'm out of warantee anyway.

    Thanks,

    Scott

  3. 0

    Dogcow-Moof

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Receipt of beacon packets isn't logged; what
    is logged is the country code when your AirPort interface is turned off and back on, such as this from
    dmesg:

    en1: 802.11d country code set to 'US'.

    So the first question I have to ask is whether your AirPort Extreme card is one that was manufactured for use in the United States.

  4. 0

    scottsavarese

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I see none of those entries in the logs (which is what I was trying to highlight above). To me that means that the card is hardcoded to the JP country code. In talking to their support, they are saying that it works for them correctly.

    The only thing left that I can think of is to update the firmware on the card. Does anybody know how to do that? One I try that if it doesn't work, I'm sending the card back.

    Thanks,

    Scott

  5. 0

    Dogcow-Moof

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    It sounds as if you may indeed have a card manufactured for use in Japan rather than one meant for use in the US.

    I'm not aware of any firmware updates that allow you to change such country codes available to the general public.

  6. 0

    scottsavarese

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Yeah... Unfortunately... I'm going to close this off as solved, and open a new one asking where I can find an internal card 802.11n card for my MBP (or one that goes in the expressbus slot but doesn't stick out an inch).

    Scott