Benches macOS

5

Going crazy, need router, switch, domain …

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

What i have......

netopia 3347-02-1006L DSL modem/router with a static ip address call it 77.700.700.700

config default address is 192.168.1.254

this is hooked into a linksys SLM2024 switch with a static ip changed to 192.168.1.251

4 computers with ip addresses 192.168.1.1 thru 192.168.1.4 and subnet mask 255.255.255.0

1 server, call it qwerty.server.com, with ip addresses 192.168.1.5 and subnet mask 255.255.255.0

with a domain name parked and waiting at godaddy.com call it server.com

i'm trying what i think is the next step by setting up a "IP Static Rout Entry" in expert mode for the server to link to godaddy domain name

options to fill in are the following

Destination Network

Netmask

Interface Type=IP Address

Gateway

Metric=1

RIP Advertise=Split Horizon

After inputting what i thought were the correct values I got this message

ERROR: 'ip static-routes destination-network has non-zero value in node portion of network address.

Validation did not pass!

What am I missing here, I'm sure it is easy but I guess I'm just not seeing this in my head correctly.

Once the static rout is correct what's next. Any help would be great before i lose all my hair as I pull it out in frustration. Thanks in advanced!

5 replies

Sign in or join Beachball Help to reply.

  1. 0

    Camelot

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    i'm trying what i think is the next step by setting up a "IP Static Rout Entry" in expert mode for the server to link to godaddy domain name

    What device is this you're referring to?

    If this is your router, you don't want static routes at all, so you're in the wrong place. What you want if
    port forwarding

    For web access to your server you need to setup port forwarding along the lines of:

    Public port: 80

    Private IP address: 192.168.1.5 (i.e. the address of the server)

    Private port: 80

    Now any traffic that comes into the router's public interface on port 80 will be forwarded to your server.

  2. 0

    Skoot28

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    So a few days ago I thought port forwarding (or pinholes in Netopia terminology) was what I wanted to do but some how during my research that option didn't seem correct. For the life of me I can't remember why. Would this option (port 80) allow remote access for the admin and any clients connecting through the internet, as well as hosting a website domain name? Since there are a million 192.168.1.5 IP addresses, what IP address do I tell godaddy.com to look for so I can setup the domain name correctly? Would it be the static IP address? And would I enter this in a "A" record under the DNS control panel at godaddy.com?

  3. 0

    Camelot

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Would this option (port 80) allow remote access for the admin and any clients connecting through the internet, as well as hosting a website domain name?

    Opening port 80 would allow anyone to connect with a web browser to the web server running on your machine. Nothing else. If you want other protocols allowed in (e.g. ssh, ARD, VPN, etc.) then you need to forward additional ports through your router.
    This technote lists the port numbers used by various services.

    Since there are a million 192.168.1.5 IP addresses, what IP address do I tell godaddy.com to look for so I can setup the domain name correctly?

    Whatever your public IP address on the router is.

    The router will have two networks attached - the private, internal network (192.168.1.x) and a public network that connects to your ISP. It's the public address that you add to your DNS.

    And would I enter this in a "A" record under the DNS control panel at godaddy.com?

    Yes.

  4. 0

    Skoot28

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Thanks for all the help Camelot. I'm an audio guy trying to be a network guy and I would like to think that I'm pretty tech savvy but this network stuff is throwing me for a loop.

    So this is the error that I received when I tried to port forward port 80.

    ERROR:

    Pinhole element web has conflict with internal

    Web-TCP service 80,

    Either change pinhole port or redirect Web Port.

    Validation did not pass!

    I'm pretty sure I don't want to change Web Port but if I did, I wouldn't even where to go to change it.

    Also, I redirected the domain name to the static IP address but the only access I have is to the router config page. I know in the end that, like audio, it will be something very simple but again, I really appreciate the help.

  5. 0

    capaho

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I think you need to set up some network address translation here if the server is using a local network address. In the router, assign a static network address to the server's MAC address, then create a NAT assignment for the routable IP address to the server's local network IP address.