Benches macOS

12

Canon IP4600 + Windows Home Server + Snow Leopa...

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

I have a WHS which PC's and MACs connect to for storage and network printing, after upgrading to snow leopard on my macs I now cannot print from the MAC's. The PC's print just fine. The mac's printed fine when they were Tiger and Leopard.

I've tried every new Canon printer driver from Apple Support and from Canon Support without success.

When I print I can see the print job in WHS printer explorer, the print job spools to 64Kb but doesn't get any further. The V.1.4.1 CUPs error log records the following:

E [13/Oct/2009:12:08:13 +0100] cupsdAuthorize: pam_authenticate() returned 9 (authentication error)!
E [13/Oct/2009:12:08:13 +0100] cupsdAuthorize: pam_authenticate() returned 9 (authentication error)!
E [13/Oct/2009:12:08:13 +0100] cupsdAuthorize: pam_authenticate() returned 9 (authentication error)!

I'm using the right user name and password combination. I've added printers via the CUPs web interface and system preferences without any success. The fault is repeatable across all of my MAC's.

Event viewer in WHS shows no errors, it appears to the WHS that all is well but that the print originator has simply stopped sending the print job after the initial 64Kb.

Has anyone else had this sort of problem and resolved it?

Thanks

Carl

12 replies

Sign in or join Beachball Help to reply.

  1. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    The mac uses short name. So what is the windows user name you are using?

  2. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Sup-chalmers

  3. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Sorry, re-read your post, user name is Carl, sup-chalmers is the machine name

  4. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    You will probably find that the Canon driver is causing the problem. The Canon drivers have not been designed to work in a mixed network environment, such as a shared connection from Windows. For this type of connection you will need to use a Gutenprint driver. This was the case with Leopard and is still the case with Snow Leopard.

    To confirm the message you are getting, I connected my iP5200 to a XP SP3 PC and shared the connection. With the Canon v10.26 selected, when I attempt to print the job never leaves the Mac and on checking the cups error log I see the same error...

    cupsdAuthorize: pam_authenticate() returned 9 (authentication error)!

    By simply changing the Driver > Print Using to the 'Canon PIXMA iP5200 - Gutenprint v5.2.3', the error does not occur and I can print after authenticating (I only used the Add Printer > Windows
    option).

    So, in your case, try changing the driver to 'Canon PIXMA iP4600 - Gutenprint v5.2.3'. This should stop the error.

    Pahu

  5. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Thanks I tried both the gutenprint and standard canon V2 driver, in fact I think that log I pasted was a result of using the Gutenprint driver from my Mac Mini.

    I tried deleting user and password from my keychain and trying different users such as administrator, WHS reports the correct owner of the print job but still bails out.

    After I'd installed leopard and SL on this mac pro I did manage to print a text document last weekend, but it wouldn't print a colour photo from Aperture. Since changing the printer name (in case it was character related) I've not been able to get the MAC Pro to print again since.

    Bit of pain as I'm wanting to move away from PC's and across to my MAC's, for the time being it's a long USB lead until Canon fix the problem.

    My old Epson worked in this config just fine and even reported ink levels when the Mini was running Tiger.

    Cheers

    Carl

  6. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Dr_Zeus wrote:
    Bit of pain as I'm wanting to move away from PC's and across to my MAC's, for the time being it's a long USB lead until Canon fix the problem.

    You will be waiting even longer than your USB cable if you think Canon will fix this. As long as they will be concerned, if it works when connected via USB then there is nothing wrong with the printer...

    As I said, I found I would get the same error when using the Canon driver. But as soon as I used the Gutenprint driver, the error did not occur. So I would be surprised that your error was when using the Gutenprint offering. Note also that my Gutenprint test worked using both the Guest account (which had to be enabled) or the account name/password used on XP.

    Pahu

  7. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I tried it again this morning and even with the Gutenprint driver it still didn't want to know.

    I added printer operators to the guest account in WHS, but the CUPS didn't like an empty password field! Guest has no password because my media streamer uses the guest account....

  8. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Instead of adding the printer via CUPS, use the Add > Windows option as a test. This will allow you to authenticate as Guest without entering a password. While this will prompt you every time you print you will at least see if it works and give you something else to look at.

    Also, instead of using SMB you could enable UNIX Print Services on the WHS and then print from the Mac using LPD. This doesn't require a password so it could be something else worth trying. The service can be enabled via Control Panel > Add Remove Windows Components (or something similar) > Other Network Print & File Services (again not 100% sure of the naming without a Windoze box handy).

    Pahu

  9. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Thanks [+]

    I only tried adding the printer via CUPS the once, all other occasions has been via system preferences, it is CUPs that gives the blank password error.

    If the WHS is running a Bonjour service would this help?

  10. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Dr_Zeus wrote:
    If the WHS is running a Bonjour service would this help?

    Possibly, depending on how much the service provides. Some are just for broadcasting a devices presence on the network while other have transport layers to permit packet transfer. But it should stop the need for authenticating if it can be done so it may be worth trying.

    I also believe that you would still need to use the Gutenprint driver.

    Pahu

  11. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I set-up and LPR printer port on the WHS by following an article on Technet, unfortunately still no success.

    /Devil's advocate hat on - You say that Canon couldn't be expected to develop a cross platform printer driver, I clearly need some education here. What I see is a product (Apple SL) offering a feature whereby a machine running this O/S may use a +windows printer+. First of all there's a limit to how many ways you can connect to a shared windows printer, to my mind it's going to be via some form of network connection. Secondly Canon offer a product with a driver for Apple's platform, clearly somebody at Canon didn't do their homework when they wrote the driver because if they had then they would have mapped out the different ways in which the driver would be expected to communicate with a canon printer, lets face it there aren't that many combinations? There's USB and Network, how many active Microsoft platforms? XP, Vista, WHS and Server 2003/2008.

    Have I missed something here? or have I made an unreasonable assumption somewhere, if so I can't see it!

    /Devil's advocate hat off

    Thanks for your help

    Carl

  12. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hi Carl,

    It is a fair point you raise regarding cross-platform support and one I agree with. But, knowing that Canon cannot get their act together even with their products that are worth twenty five thousand dollars, I doubt they will commit any resources into a product they sell for under two hundred dollars. And they are not the only vendor who provides limited support for their Mac customers.

    It still concerns me that you cannot get this working with the Gutenprint driver. Are the logs still showing authentication related errors?

    You may also want to have a look at the following article. This was written for instances where there was no Mac driver available, but it may also be worth trying to isolate the cause.

    http://iharder.sourceforge.net/current/macosx/winmacprinter/

    Pahu