Benches macOS

7

How to abandon/remove Raid 1 Mirror Set a…

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

I had a Raid 1 Mirror Set (software) "gone bad" and want to do away with it. For now, I've pulled one drive out and am using a degraded set. I do want to keep the entire data from one the main drive and use it as a main/boot volume. I know I need to boot from the DVD and use Disk Util to remove the set, but my question is, what exactly will happen to the HDDs? Will removing Raid wipe out my data? Will I be able to boot from one drive (just like I am now in the degraded set) and make OS see them as two separate independent drives again? Or are there strings attached? (like having to format both drives and restore OS on one).

Any experiences with this? I would appreciate the help as I am stuck not willing to go into the unknown territory without any advice.

7 replies

Sign in or join Beachball Help to reply.

  1. 0

    Camelot

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    The command
    diskutil destroyRAID will convert a RAID into independent disks.

    It
    tries to preserve data but you should take a backup first, just in case.

    Boot from the install DVD, launch Terminal from the menu then run:

    diskutil destroyRAID /Volumes/Volname

  2. 0

    yogi799

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Thanks, I guess I was thinking I should use the GUI version, but I have seen this advice a few times before so it may just be the best thing to do. Thanks a lot

  3. 0

    yogi799

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Oh, and I take it volname is the name of my Raid set, not a slice member?

  4. 0

    Camelot

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Correct - when you use the /Volumes/volname option you're specifying the name of the volume as it appears on the desktop.

    If you prefer you can use the disk
    n identifier, too, but most people are more familiar with their disk names 🙂

  5. 0

    yogi799

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Much appreciated, thanks.

  6. 0

    yogi799

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Just an update and a new information here, something I have not seen anywhere on this forum:

    I have just attempted and confirmed that a GUI Disk Utility CAN SAFELY destroy/delete a Raid Mirror Set and leave your primary drive information intact.

    I have booted from a DVD while single HDD was installed. Then hot-installed second HDD and opened Disk Utility GUI. Immediately Disk Util started rebuilding the second HDD. You can click on either the raid set name row or any of the slices below it and click DELETE. Disk Util will give you a warning that by doing so you will end up with two split hard drives with full content. So I confirmed and my Raid set was deleted. My primary drive inherited the Raid set's name, while the second drive was empty and needed a quick format to be recognized (for some reason, maybe b/c I broke the set during a rebuild process, which I didn't really care about anymore, obviously). The primary drive needed some checking and error fixing and upon restart booted with no problem and no Raid setup in place.

  7. 0

    Grant Bennet-Alder

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Creating and destroying RAID sets requires adjusting the data partition size a little to make room for a "regular" driver, which is not present on a RAID Slice.

    The potential peril is that the data partition size cannot easily be adjusted for some reason, such as too full or no space available at the end.