Running hardware test in snow leopard
apple Verified ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
How can you run apple's hardware test in snow leopard?
I have a snow leopard drop in dvd that allowed me to do a full erase of leopard and the hard drives and install snow leopard fresh but when I put it in the drive and reboot holding down D, nothing happens and it just boots as normal.
Should I use the old leopard dvds? Which one would it be on?
Thanks for any advice.
17 replies
Sign in or join Beachball Help to reply.
- 0
cornelius ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Luis:
Apple Hardware Test would be on the installer that shipped originally with the computer.
π cornelius
- 0
micp ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hardware test will be on the install dvd that shipped with your hardware.
To boot from DVD hold the 'C' key.
Cheers
Michael
- 0
cornelius ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Luis:
Apple Hardware Test would be on the installer that shipped originally with the computer.
π cornelius
- 0
micp ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hardware test will be on the install dvd that shipped with your hardware.
To boot from DVD hold the 'C' key.
Cheers
Michael
- 0
cornelius ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
To boot from DVD hold the 'C' key.
Holding down the C key will boot from the installer disk. To boot from AHT hold down the D key.
π cornelius
- 0
Luis Ortega ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Thanks guys, I found it and ran it.
I am trying to find out if some part of my graphics system (video ram, etc.) might be faulty.
I ran techtool and it gives me inconsistent results saying that the video ram fails sometimes and not others.
I have the gtx285 and snow leopard.
Apple hardware test reports no problems, and I have no symptoms that would lead me to believe that the card or video ram is faulty, but the techtool results have me worried.
Are there any other video ram or graphics card testing programs that I might try? - 0
donv (The Ghost) ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Do you have symptoms that would imply that your card or video ram is bad? If not, then I'd just forget about it until you have concrete symptoms.
If you are out of warranty, then you don't want to know more. And, if you are in warranty and have no symptoms, then you can't get it repaired.
If you have concrete symptoms and are in warranty, then I'd contact Apple. I wish the least expensive possible outcome for you.
- 0
SuperK ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
i've been trying to do a diagnostic test all day. i did as you described using the installer disk and holding down the "D" key when restarting. however, i had to abort it as i had to leave the office and attend to something important. i then came home and attempted to do the test again but this time repeated attempts at rebooting holding down the "D" key have failed to produce the test. my mac repeatedly reboots as normal. could you explain what is happening?
- 0
cornelius ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
SuperK:
i had to abort it as i had to leave the office and attend to something important. i then came home and attempted to do the test again but this time repeated attempts at rebooting holding down the "D" key have failed to produce the test.
I have no idea what happened when you aborted. You could hae let it boot and then come back to it when you were done with whatever you had to do.
Try this:
Insert disk in optical drive
Hit Power button
Hold down Option key immediately after chime.
Select AHT and click straight arrow.π cornelius
- 0
donv (The Ghost) ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
If what's above does not work, then, presuming you are well backed up, you might try to repair your installation by installing Sno over Sno using an upgrade install.
- 0
califfo1975 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I have posted a topic about the aht on snow leopard: before SL I was able to launch the aht from the hard disc during the boot but now it is no longer possible. Why? Is this normal? Only solution is to use the apple dvd rom but no more the hard disc. What happened? Please advise. Cheers.
http://discussions.apple.com/thread.jspa?messageID=10384805�Message was edited by: califfo1975
- 0
The hatter ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
The OEM installer sets up a hidden partition that could be accessed without the OEM DVD being present. That feature was added for the Mac Pro in Early 2008, maybe part of any 10.5.x Leopard system, or any OEM Snow Leopard now.
I wondered if installing 10.6 would alter or "disrupt" the ability or remove access to, or the AHT routine and partition. Guess it does.
- 0
califfo1975 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Looking at what happened to me, it seems that you are fully right. I would like to know about other people having encountered the same issue. How can i make apple aware of this? Thanks.
- 0
The hatter ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Actually it may be totally normal and no retail install DVD for Mac OS could avoid it or leave it in place. If you liked it, best bet is to keep one hard drive with 10.5.x - not a bad idea anyway.
Cloning a drive only copies the user volume, and won't retain such hidden partitions.
If you want to find out more, you may need to install from your OEM and then look at the partition map from the terminal and compare the two.
- 0
califfo1975 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I can live without it but I would like to know what happened and if I am the only one to have gone through this problem. How can I acknowledge apple? Cheers and thanks again
- 0
cornelius ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
califfo1975:
I am a bit unclear about what you are attempting, even after reading the thread you linked. Your reference to "before SL I was able to launch the aht from the hard disc during the boot but now it is no longer possible." I am not aware that launching AHT from the HDD during boot was ever possible, so that confuses me.
AHT is included on the install DVD on computers that came with the installer on DVD. In computers that came with installers on CD, the AHT is on a separate CD. This line in your linked thread adds to my confusion:
If i can run it only from the dvd rom, the day this latter will fail i will have no more hw test possibilIty though...
AHT on DVD will fail if your HDD becomes damaged or unreadable, or lost, or if your optical drive fails. As far as I am able to determine, unless you installed AHT or a separate partition on your internal HDD and boot directly from it, you were never able to run AHT from your internal HDD.
That said, my present knowledge does not exclude other possibilities, and I am open to learning new options.
π cornelius
- 0
The hatter ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Take a look and search MacIntouch and others. In 2008, just holding down 'D' on startup IF you used the original OEM drive, it was installed from the factory with AHT; or, if you used the OEM DVD to install (someone here tested for that).
Intel Macs came with 10.4.x, OEM only, never retail, on DVDs, but AHT was on #1 (part of dual-layer design).
Having AHT on hard drive never removed the ability to still use it the old way, from DVD, just another option - created in part to allow MacBook Air to run AHT. - you don't even need a hard drive to run AHT off DVD (yes you need optical drive that functions).
*MacBook Air: Using Apple Hardware Test Application*
http://support.apple.com/kb/HT2644
*Mac OS X 10.5 Leopard: Using Apple Hardware Test after erasing your disk*
Some Intel-based Macs ship with Apple Hardware Test and Mac OS X 10.4.x preinstalled on the hard drive. If an Erase and Install installation of Mac OS X 10.5 Leopard is performed using a retail Leopard installation disc, Apple Hardware Test will be erased and not reinstalled on these Macs.
http://support.apple.com/kb/TA24969