Benches macOS

15

Snow Leopard Cisco VPN timeout

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

I am using the built-in Cisco IPSec VPN in Snow Leopard to connect to my company's server. My VPN connection times out after 1 hour regardless whether I am actively using (sending/retrieving information through the VPN).

Any help as to where I can change a setting to keep the connection alive longer or until I disconnect?

15 replies

Sign in or join Beachball Help to reply.

  1. 0

    Smutticus

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I have a similar problem but not limited to an hour. My VPN just disconnects sometimes.

    I used the Cisco VPN in 10.5 and never had any problems. Since I have upgraded to 10.6 and started using the built in VPN I get disconnects multiple times a day.

    Doesn't seem to me like it's a settings issue. Looks more like a bug in the built in VPN.

  2. 0

    Advitiya Banga

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I am having this rather annoying problem as well. It's not disconnects - well not straight away. Our gateway is said to re-authenticate after 4 hours. I get a dialog box requesting reconnection after 50 minutes. After four re-authentication requests I get disconnected. I'd like to use the built in VPN client since it is there, but I might have to end up moving to the Cisco VPN client if there is no other option. The nice thing about using the built in getting the proxies and getting the search domains without having to change locations.

    Adi.

  3. 0

    Guido Paap

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Same here, after between 30 and 60 minutes the connection suddenly drops. The most annoying thing is the dialog which pops up! It even comes to front in a full screen presentation! 😟

  4. 0

    KrisKirkland

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I'm having the same problem, don't let me down Steve!

  5. 0

    BLoudermilk

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Another Snow Leopard user (15" unibody) confirming the 1 hour timeout on VPN connections. For me, it usually happens around 56-58 minutes and the client doesn't disconnect or anything, I simply lose connectivity.

  6. 0

    smickd

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Yes, I too was hoping the 10.6.2 update would solve the issue. I have less frequent drops, but yes, they are still there. I may go back to 10.4.11 and stability. I can do without this feature of Snow Leopard.

    Sign me dissapointed in the 6.2 update

  7. 0

    Aris64

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I have a very simular problem on my new iMac 10.6.2. After about 45-60 min of connection is asking to re-enter my user's password (the one related to vpn connection). If I will do then the connection remains alive, otherwise (if I am not there to re-type the password) the connection is ending. The password is saved into KeyChain as I see and during the initial connection VPN goes on without entering the password. Any idea how could keep VPN alive without re-entering the password?

  8. 0

    Geekable

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I get the reconnection dialog box all the time. It usually occurs 48 minutes in, but sometimes 96 minutes in.

  9. 0

    GraceShan

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Same problem here. Hoping for a solution soon!!

  10. 0

    direwolf8

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    What's the cause of the disconnection? It should be in the log on whichever end initiated it.

  11. 0

    prbarnard

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I don't think it is a timeout. The console shows the following sequence when a disconnection occurs.

    IKE Packet: transmit success. (Information message).

    IKEv1 Information-Notice: transmit success. (R-U-THERE?).

    IKEv1 Dead-Peer-Detection: request transmitted. (Initiator DPD Request).

    IKE Packet: transmit success. (Information message).

    IKEv1 Information-Notice: transmit success. (R-U-THERE?).

    IKEv1 Dead-Peer-Detection: request retransmitted. (Initiator DPD Request).

    ... This is repeated a number of times until the following message is seen

    IKEv1 Dead-Peer-Detection: maximum retransmits. (DPD maximum retransmits).

    IKE Packet: transmit failed. (Information message).

    IKEv1 Information-Notice: transmit failed. (Delete IPSEC-SA).

    IKE Packet: transmit failed. (Information message).

    IKEv1 Information-Notice: transmit failed. (Delete IPSEC-SA).

    I have increased the debug level in racoon to see if it will give a little more information but still connected at the moment.

  12. 0

    prbarnard

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    No additional information from racoon with increased debug level. Looks like (in my case at least) there is no R-U-THERE-ACK being processed when the failure occurs. They do come through at other time though. I see

    IKE Packet: transmit success. (Information message).

    IKEv1 Information-Notice: transmit success. (R-U-THERE?).

    IKEv1 Dead-Peer-Detection: request transmitted. (Initiator DPD Request).

    IKEv1 Dead-Peer-Detection: response received. (Initiator DPD Request).

    at other points in the log

  13. 0

    Niels P.

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Anyone made any progress on this?

    The built-in client is very fast to connect, the connection is rock-solid, but this little bug/feature is very annoying.

  14. 0

    BLoudermilk

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I find the VPN randomly works past the usual 58-60 minute mark. Sometimes when I try to ssh a server on the VPN, it will lag a lot for about a minute, then it will work and I wont have to reconnect for the rest of the day (8-9 hours).

  15. 0

    Niels P.

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    As far as I can tell, OS/X racoon decides to do a main mode rekeying after approx 1 hour. Where it messes up for me is that it doesn't remember my xauth username/password and has me re-enter it. If I'm a bit too slow the connection is messed up.