Won't install, can't find 10.4
apple Verified ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I'm trying to install Leopard on my Powerbook G4 aluminum. The installer starts up and checks for a previous version of 10.4 (which is what is running on there currently) but says it cannot install Leopard because it can't find a previous version of 10.4.
I've tried running Disk Utility from another DVD and it won't even mount even if I hold down the "C" key. If I try to run it from the Leopard disk, all the options are grayed out for the internal hard drive.
What's going on?
9 replies
Sign in or join Beachball Help to reply.
- 0
Donald Palmer ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Is this a retail version of Leopard that you're trying to install?
There is no upgrade path between 10.4.x and Leopard.
Leopard is a completely new OS that is not dependent on a previous system install. - 0
Mersalmararc ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
It came with my Mac Pro.
It actually seems to be working now. I was finally able to get disk utility to run even though it found no repairs needed. But once I did that and started the Leopard install again, it FOUND 10.4 and proceeded with the install.
So, I'm not sure about it not needing 10.4. Each time it's come up it says it needs to have a copy of 10.4 installed before it will upgrade it.
- 0
dechamp ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
You are trying to use a custom installation DVD for an Intel processor machine to install Leopard to a G4 processor computer. The message you are getting is kind of cryptic in that it doesn't give all of the information. It's not just that it doesn't see 10.4, but that it doesn't see an Intel version of 10.4 and it doesn't see a qualifying machine ID.
Since you would be violating the terms of use from Apple, it's hard for anyone here to help you bypass the hardware checks or hack the installer to work. Apple license requires a separate copy from a retail installer DVD (or the Family Pack) to be properly installed.
In addition, if you are able to get around the restrictions and trick the disc to do an installation you will probably find that many of the files that get installed on your G4 Mac will be Intel versions and will not work properly. This will be a nightmare for you to try to fix. Good Luck with that...
Note: if you do get a retail installer disc and do a fresh install on your machine, it will not have the iLife applications. They are only included for free with the original setup discs for your machine and you will have to use those discs to install the applications from the "Bundled Applications" folder.
- 0
Mersalmararc ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
There's nothing about the DVD that says it's for Intel processors only, it just says that it's a Leopard install disk. My Mac Pro came with Leopard already installed AND the disk and nowhere that I can find does it say that it's meant to be used on that computer only.
After running Disk Utility on the G4 laptop, the install worked fine. So clearly there was something that needed fixing in order for the installer to work and has nothing to do with "bypassing" the hardware checks or "hacking" the installer.
Leopard is up and running fine and everything seems to be working as it should.
- 0
dechamp ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Interesting. The discs that actually came with my MacBookPro and a new iMac say they are for each model specifically. There are two DVD's in the set and they are designed to install Leopard and the bundled iLife applications. They have dull gray labels.
Both of these machines came with their own set. Each specifies the machine they are for. They came in a white box type sleeve which had "Everything Else" on it's cover. Typical Apple packaging for new computers.
It sounds like you didn't get the factory recovery discs, but rather a retail copy of Leopard. My retail copy of Leopard "family pack" has a totally different label with the Black "X" in front of a space shot similar to Time Machine.
If you don't really have a factory set for your Mac Pro (which I assumed you did because you said the disc came with the computer), and got a retail version instead, then the retail DVD will work on any qualified Mac.
Did the DVD install iLife '08?
Maybe there's something special about the discs for Mac Pro's? I haven't bought a new tower since my Dual G4 and haven't seen the Mac Pro discs yet.
- 0
Mersalmararc ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
It's one disk with the starry sky and purple swirl in the center with a large "X" across the whole disk. It's titled Mac OS X Leopard, CPU Drop-in DVD. Nowhere else does it say anything about models.
It did not install iLife. It just upgraded the system to Leopard.
- 0
Chuck Wack ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I saw the same when installing on a G5. When you boot from the DVD (holding the "C" key) the disk utility won't "see" the internal hard drive... hence the installer can't find 10.4
Insert the disk as you normally would; while booted from 10.4 and double click the installer. It will tell you have to reboot the computer, click OK, it'll restart booting from the DVD and run as you would normally expect it installing 10.5(at least that's what I saw when I did it).
- 0
Mersalmararc ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Yeah, that's what I started out doing. Even doing it that way, the installer wouldn't see 10.4. It wasn't until I finally got Disk Utility from an older DVD to run, that it finally saw it and worked.
- 0
dechamp ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
It's great that it worked for you. You do not have the original discs that came with your Mac. The CPU Drop-In DVD was only supposed to go to machines that were built with Tiger on them, and Apple didn't want to have all the machines in the supply line returned for re-installation when Leopard was released. This is an authorized upgrade to Leopard, contrary to other opinions.
Many people have tried to use these Drop-In DVD's on other machines in violation of the user agreement, and have met with failure, because the disc is not supposed to be used on any machine but the ones it is designed for. I don't know how it did work and probably couldn't discuss it on this forum anyway.
If you had tried to use the discs that were supposed to have come with your machine, the factory restoration discs that include iLife, they would not have worked on a G4 processor or probably even other Intel Mac's. Also, if you ever have to reinstall your system from scratch, you will not get iLife (it's not on the drop-in DVD or the Retail version of Leopard).
The whole idea is that Apple sold you one machine, with one OS. They require a different copy of Leopard for each machine unless you buy the 5 user Family Pack.
If your G4 came with Tiger, then Apple does not provide a free upgrade disk unless the machine was built with Tiger, but sold after Leopard's release. If it works, you've gotten lucky and Apple loses the sale.
You might want to contact the seller to get the original discs... It's probably a 2 DVD set with Tiger and all the bundled applications...