Benches macOS

6

computer says to 'see administrator&#…

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

Like so many others, my MacBook Pro won't connect to my wireless setup after installing Leopard. When I work through the solutions, I always get the message to 'see administrator'. What the heck does that mean? I am the administrator and the computer lists me as the administrator but there's absolutely no advice anywhere I've found as to what I'm supposed to do. Why are these little comments put in here with NO backup advice? Also, the computer wants a password, when there IS NO PASSWORD REQURED!! I can't figure out how to fix this. I'm not knowledgeable in computerese and just try to follow what's given me through the help screens, and sometimes that's no help at all. It's so frustrating. Any help would be appreciated.

Thanks

6 replies

Sign in or join Beachball Help to reply.

  1. 0

    LarryHN

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    what exactly does the error say and what exactly were you doing when you received it?

    LN

  2. 0

    veritasamo

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I was simply trying to connect to the wireless network. Airport was on, but didn't join automatically, so I selected the network name in the drop down menu that comes up under Airport. After it tried for a few seconds to join, the two words showed up 'see administrator.'

    I've noticed a few new things since I've been investigating this: 1) I deleted this network (with the aim of re-creating it to see if that would solve the problem), but it continues to show up in the drop down menu under airport. (I did save the changes, and now nothing happens when I select it, but nevertheless the name is still there).

    Now when I select 'join other network' and choose it, it continues to show 'see administrator.'

    However, if I select 'open network preferences', and in the Network Name box select the same network, nothing happens...the 'apply' button is grayed out, only the 'assist me' button is available. I choose that and quite frankly nothing I choose works. The Airport settings, Network settings, ISP, Internet, and Server all come up as failed.

    I have a Linksys SRK200 router set up on our main computer and every other laptop in the house have no problem connecting. My mac connected with no problem until just recently (it worked for a while after Leopard was installed), but now it just refused to connect.

    Is there any way to have the correct settings spelled out so I can make sure that all is configured properly?

  3. 0

    LarryHN

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    are you using DHCP to connect?

    1) I deleted this network (with the aim of re-creating it to see if that would solve the problem), but it continues to show up in the drop down menu under airport. (I did save the changes, and now nothing happens when I select it, but nevertheless the name is still there).

    I assume you did this by going to advanced ==> airport, selecting your network and clicking in the - sign at the bottom of the list and that is not removing it for the advanced list?

    LN

  4. 0

    veritasamo

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I believe I am using the DHCP to connect, and, yes, I did go through the advanced tabs to remove my network from the list.

    The TCP/IP shows: configure IPv4: using dhcp; configure IPv6: automatically. Everything else on that page is not filled in.

    Under the DNS setting, there is nothing in either box;

    Under WINS: NetBios name is set to a greyed out Macintosh with nothing else entered;

    Under Appletalk: nothing;

    under 802.1x:802.1x is enabled (I've enabled and disabled with no results); on that same page, there's no wireless network specified in the box and authentication is set to TTLS and PEAP;

    Under proxies: Configure proxies has been set to 'manually'; nothing else is selected in any other box there, except that in the 'bypass proxy settings for these hosts and domains, there's a *.local (number follows), and the passive FTP mode is checked.

    I give these settings because I don't know what's important...my daughter's boyfriend (a computer geek) set things up at first.

    Thanks for helping with this!

  5. 0

    FunkyLB

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I am having the same problem! The there any resolution to this. I am trying to connect to a Belkin MIMO router.

  6. 0

    FunkyLB

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Ok...I seem to have gotten mine to work by opening the keychain and deleting all airport connection entries and it worked. Hope this helps others