Imported from the Apple Support Forums via the Wayback Machine 🔗
Howdy all, has anyone figured out how to get an Acard 6260m to work with 10.5.x? There is a 62xx extension in both 10.4 and 10.5. But the drives attached to the card are no longer recognized. The versions of the drivers are different, and I swapped the extensions with no luck. It actually recognized that I put in an old extension, and it didn't seem to like it. There are no updaters on the acard site for this card.
Imported from the Apple Support Forums via the Wayback Machine 🔗
This is on a dual 1 Ghz Quicksilver machine with a fresh install.
0
Matteo Cacciari·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Same problem here, did you find a solution?
0
Hunter Hicks1·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Yeah, no worky yet. There probably is a way to do it with old extensions- I just haven't figured out the magic combo yet. Anyone know what makes 10.5 like 10.4 extensions?
0
Hunter Hicks1·
Imported from the Apple Support Forums via the Wayback Machine 🔗
OK, I gave up. Yanked the card and I'm running off the internal IDE buses now.
When I yanked the card, I found out it was actually a Sonnet Tempo Ultra66, which is the same as a 6260m.
There is an updater on the sonnet site for it (3.1.2 I think)- that might fix things. But, I got tired of messing with it.
0
jj jag·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Here's my replies from Acard
The AEC6260M supports upto Mac OS 9.x only.
It was phased out before Mac OS X published.
it might be work with Mac OS X 10.3 and 10.4 but without our guarantee.
Please understand...
Thanks for writing!
Your comments make our service improved.
ACARD Technical Support Dept.
I had put Leopard on an other drive so I could switch back to TIGER and get my Apps....
0
jj jag·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Description: This software updates any compatible Tempo SATA card's flash ROM (firmware) to driver version 2.1.2 (except the 2-port Tempo Serial ATA model).
I have requested Help from Sonnet/ Acard... will keep you posted.
0
jj jag·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Imported from the Apple Support Forums via the Wayback Machine 🔗
Opps yes ACard replied
Dear Sir,
You might need newer IDE host controller such as our AEC6280M and AEC6880M which support not only the Mac OS X 10.5 but also big drive technology(128G and above).
Thanks for writing!
Your comments make our service improved.
ACARD Technical Support Dept.
0
Tim Butler·
Imported from the Apple Support Forums via the Wayback Machine 🔗