New MacBook Pro won't detect projectors
apple Verified ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I had a MacBook Pro 17" from January 2007 to July 2008 and it
always connected to any digital projector without trouble. I could put it to sleep, and when it was time for the talk it would wake up ready with the first slide. My new MacBook Pro 17" (July 2008) will
never (except perhaps once) detect that a projector is connected without a reboot. I have tried a couple of different projectors so far, but wondered if anyone else has had this problem?
Thanks
13 replies
Sign in or join Beachball Help to reply.
- 0
William Durbin ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I had this problem initially with my MacBook Pro, but I've managed to solve it without rebooting. Sometimes the order in which you hook up the output cable, can make a difference. Make sure the projector is on, then plug the cable into your machine. Also, using the detect displays option (in system preferences under displays) almost always works. I added the detect button to my tool bar so it's easy to access. The brand of projector--assuming it's not ancient--shouldn't matter. Bill D.
Here are some other tips from previous posters:
For some reason, Apple thinks it's important that you connect the VGA cable to the adapter first, and then the adapter to the computer, in this order. Have you done this?
Try forcing the MacBook Pro to re-detect displays by pressing F7 (or Fn+F7 if you have customized the function keys).
Go to System Preferences>Displays>Arrangement and then check the box that says "mirror displays."
Set the resolution output to whatever the projector is (1024x768?).
"To detect the TV or other external device, hold down the Command (x) key and press the F2 key. You can also open the Displays pane of System Preferences and click the
Detect Displays button.
6 To adjust how the image is displayed on the device, use the Displays pane of System Preferences." - 0
PaulSelden ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Thanks for the various responses. I don't know why, but after reinstalling Leopard (twice), and a new logic board, none of which helped, after the Christmas holidays (when I went to Europe) it now works fine! So, it could be that taking it to 35,000 feet helps! Maybe it was something loose. I generally need to manually select Detect Displays but that is a minor irritation compared to a full restart.
Paul
- 0
PaulSelden ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Thanks for the replies. I don't know what the projectors are because they are up on the ceiling in lecture rooms. There is a plug for the laptop on the podium and a switched controller. Just this morning I had to reboot before the laptop would recognize my external monitor (Apple 30" cinema display). There was never any problem with the old PowerBook, so I am wondering if it is a hardware problem with the new laptop.
- 0
PaulSelden ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Yes, nothing happens. On my previous Macbook Pro it would automatically detect; on the new one it won't and even when I click on Detect Displays it won't. I know it has not detected (apart from the obvious) a) because the display on the laptop stays at the same resolution, and b) the option for Mirror Displays is unavailable. Interestingly though, when it would not detect the external Cinema Display, the screen did go to blue and back, but did not fire up the monitor.
Thanks for these suggestions; next step to ask the Apple guys at the local store if they've come across this.
- 0
Merged Content 1 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Our MacBook Pros won't detect the projectors either. It is becoming a major headache. Using 'Detect Displays' will not work. Maybe Apple is in the process of discontinuing this function? The only work around seems to be to Restart the MBP. The projector recognition from sleep doesn't seem to work anymore. Maybe before each lecture the MBP should be restarted and then plugged directly into the projector. Also, the Energy Saver should be set as to not allow the computer to sleep or it won't recognize the projector. I don't know if any of this works in all cases but it seemed to work for some of the projectors at the schools. We have tried to resolve the problem but have had to delay classes while tech support restarted projectors and computers.
- 0
aronaldg ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
My solution was to disable pin 12 on the DVI to VGA dongle. See
http://en.wikipedia.org/wiki/VGA_connector for the logic behind
this. I disabled the pin by drilling it out. I drilled first with a 1/16"
bit, followed this with a 5/64" bit, and finished with a 3/32" bit.
Most likely the 3/32" bit was excessive, stopping at 5/64" would
probably have been adequate. - 0
JoLoBa ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Same problem here. My new MacBook Pro wouldn't play with any of our projectors. Detect displays was futile. 6 calls to Apple "support" with no solution in sight.
FInally, I took a projector and the computer up to our local Apple store. The guy there said many of the MacBook Pros are very sensitive to cord damage. He sent me to Radio Shack for a new DVI to DVI cord. Worked! I've tried the same thing with another projector, a new DVI to VGA cord, and the Apple-supplied adaptor. Also worked!
So, I've learned:
-My MacBook Pro will not tolerate any cord damage at all. Things have to be pristine.
-It also needs me to treat it like a PC when connecting: Connect everything--projector to computer and both to power. Then turn the projector on. When it is searching, turn the computer on.
-If it stops projecting. turn everything off and start over. Detect displays is still futile.I hope this helps someone avoid the days I've spent on this problem! I am furious with Apple, especially when the solution, at least for me, turned out to be so easy. I need a new home computer (which will not need to project. Whew.) Although I've used Macs for over 20 years, this actually had me considering a PC.
- 0
noeldc ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
There is another issue with the new macbook pro (2.2GHz) and older projectors, which is that the lowest selectable frequency output of the mac seems to be 60Hz. Some older projectors have 50Hz as their highest frequency and consequently my mac has been about as useful as a paperweight in all my briefings.
Message was edited by: noeldc
- 0
clintbradford ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
What projector model?
- 0
scott gretzinger ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
i am having same problem, any suggestions appreciated
- 0
RideauSkater ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Have you tried using "Detect Displays" or going through the Display preferences as suggested by a previous poster?
What happens when you do?
- 0
Merged Content 1 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
That is system 10.5.5 not 10.5.2
- 0
Andreas66 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
With us this happens when the cable in the meeting or lecture room is long enough. So problem with the signal power sent to the cable?