Benches MacBooks

2

Connecting Multiple Computer Wirelessly t…

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

Fujitsu released Scansnap Home to replace Scansnap Manager in Oct 2018. Does anyone know if we can now connect multiple computers wirelessly to the Scansnap iX500? With the old software, we were limited to one computer at a time with the iX500 but the newest scanner, the iX1500, supports multiple computers wirelessly on Scansnap Home.

2 replies

Sign in or join Beachball Help to reply.

  1. 0

    BobTheFisherman

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I would read the scanner's manual to see how to set it up on a wifi network. Then all devices on the network could access it. I assume, but have never used the old model, that the old model could also be accessed over the wifi network by all devices on the network.

    It sounds to me as though rather than using a wifi network you have been trying to connect each device directly to the scanner.

  2. 0

    Grant Bennet-Alder

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    There are two distinct ways to set up Wireless printers in general:

    The easy, but inflexible method is to set it up as an AirPrint device. when used in this way, it can accept print jobs directly from wireless devices such as iPhones when they are brought close enough to the Printer. The printer is acting as its own Base Station, and does not care about your home Wi-Fi network.

    The more robust way is to make the Printer a station on your home Wi-Fi network. But setup is more complex because you have to tell the Printer the Network-name, Password, and sometimes its Manual IP Address to get it working. And this information can NOT be supplied over the home Wi-Fi Network, so it must be entered manually, or the printer must be connected with a cable to set it up.

    Printer manufacturers do not care which setup you use, and often will steer you to the easy, but inflexible AirPrint setup, which is much less useful. Only a careful reading of your Printer manual will tell how to set it up the way you want.