LEOPARD -FILEVAULT- PROBLEM HELP!. PASSWORD PROBLEM?
apple Verified ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hello.. my friend installed LEOPARD upgrade today. Everything went OK, then he do the Softwware update and the re-start and when it went up, his MacBook Pro can't take his password. Some message with FILEVAULT problem came up.
He can re-installed Leopard again and save his data?
15 replies
Sign in or join Beachball Help to reply.
- 0
James Dusseau ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I'm having what I'm going to assume is a similar problem. I get an error that says "Your FileVault-protected home folder did not open and needs to be repaired. Click OK to repair the folder and continue logging in. Click Cancel Login to log in as a different user."
Clicking OK cause it to hang for a while and eventually give me a message saying "Logging into the account failed because an error occurred."I have the login update, the account was created under 10.4 and the password was 7 characters.
Is anyone else having this problem, or has any information?
- 0
prometheas ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Same problem. I noticed it happened immediately after the Keychain update.
- 0
prometheas ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
OK, so after a little more hunting, I discovered this:
http://forums.macrumors.com/showthread.php?t=377855&highlight=filevault
So, it seems that Leopard hoses FileVault home directories. Funny thing, but it got two user home directories on my machine.
My question is, why the **** didn't the installer identify the two specific home directories that are FileVault enabled and explicitly warn me about them at installation time???
Please tell me there's a real solution here, people.
- 0
Sakari Pesonen ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
This one doesn't work for me. Disk Utility may even hang/crash when trying to tinker on the corrupted sparseimage on Leopard (with an another admin account).
- 0
Sakari Pesonen ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I solved my problem. In short: Manually decrypt your sparseimage, place the data in your home directory and disable filevault. Then login and enjoy! (And maybe enable FileVault again... 🙂
You need:
- An extra user with no FV enabled (admin)
- An external disk drive with enough space to hold your home directoryHere is what I did:
1. Restore your Tiger setup from backup (you DO have one, don't you?)
2. Log in to your FileVaulted account. Open Terminal
3. Do "cd .. ; sudo cp -R -p johndoe /Volumes/A
Big_ExtDrive/" (Assume your homedirectory/shortname is 'johndoe')
4. Upgrade to Leopard
5. Log into the admin account, connect the external drive
6. Open Terminal
7. Do "cd .. ; sudo mv johndoe johndoe_old" This renames your old homedirectory which has your filevault image. If you don't have enough space left, you can remove this directory / sparseimage by typing "sudo rm johndoe/johndoe.sparseimage"
8. Do "cp -R -p /Volumes/A
Big_ExtDrive/johndoe ." to copy your data back, non-crypted (you should be in /Users directory now)
9. Type "sudo dscl . -delete /Users/johndoe HomeDirectory" to disable FileVault
10. No reboot required, just log in to your johndoe account! 🙂
(11. Remove the /Users/johndoe_old -directory)You can verify #9 with this:
Your johndoe account should have this key, like this:
[terminal begin]
admin$ sudo dscl . -read /Users/johndoe/ HomeDirectory
HomeDirectory: <home_dir><url>
file://localhost/Users/johndoe/johndoe.sparseimage</url></home_dir>
[terminal end]
..which means this account has FileVault enabled....and the admin account should not have this key:
[terminal begin]
admin$ sudo dscl . -read /Users/admin/ HomeDirectory
No such key: HomeDirectory
[terminal end]
..nobe, disabled.HTH,
-Sakke - 0
Daniela van der Heijden ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I have the same problem!
How can I turn off FileVault from another (administrator) account? Is there a way? I can't get into my main account and desperately need to. I get that same "repair needed" message and then it won't let me login. - 0
mus1k4u ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I just got off the phone from Apple Tech support (Holding for 20 minutes on a 10th attempt) I could not get past the log-in screen. "File Vault error needs to be repaired". This is what Brandon from Apple told me to do.
1)Restart Computer holding down the "c" key.
2)Follow the onscreen instructions until you get to "Select Drive to install to"
3)Select your drive-click customize
4)Select the 2nd option, (install and do back of of files) and uncheck the box below the option...sorry I can't remember what the option is...Im in the middle of trying it now.
5)continue.
6)If you have already screened the install DVD, there is no reason to do this step again, it is ok to skip to install.
If this does not work you need to erase and install, however, you will need to do a file transfer to another mac computer via fire-wire by holding down the "T" key during start up prior to erasing the drive and installation of Leopard. - 0
James Dusseau ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
What I wound up doing was backing up the sparse image, recreating the user, and restoring from a backup. Everything seems to be working, but it definitely cost me a few hours. It would have been nice for the installer to do a check before it proceeded, but no harm, no foul.
- 0
Wolke63 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Daniela,
the problem is - you cannot turn off file vault once the sparse image is currupted because in order to turn it off you would need to transform all encrypted files into decrypted files Which does not work if you cannot access the image. This is also the reason why the machine locks you out. The login tries to read data from the corrupted sparse image and runs into the error .
What makes this bug so nasty is that the OS 10.5 installer has in my case currupted the image so heavily, that the Mac Disk Utility was not
able to repair it.Hence you have to log in with another user with admin privileges (you can also convert any user to admin status) and then you can either
(1) delete the crypted user, create a new one and apply your backup to the new users home directory
(2) or you can use the Mac Disk Tool to save as many data as possible. In my case, data loss was minimal - but shoveling around 30 gigs took my hours.Hope that helps
Wolfgang
PS: I'm in the software business - what makes me mad about this bug is that it appears to me that
nobody has ever tested to install this on a Mac using File Vault with OS X 10.5 - If any of the people responsible for testing the 10.5 installer reads this: rethink your career path! In my case you have wasted 4 hours of my life and that translates to at least 4 times the price of the OS in lost fees. - 0
Daniela van der Heijden ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Thanks, I'll try and post.
It is SOOOO annoying
Daniela - 0
Daniela van der Heijden ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hi Caillebotte
ok I've had my turn with apple support and they say there is nothing one can do other than archive and install and cry. (which is pretty much what I am doing, since I was stupid enough to NOT backup my data before I upgraded, must have had brain failure or something). Am doing this now, so what is the Mac Disk Tool you are talking about?
At least one can say FileVault is doing its job well, too well in fact, even in corrupted state it's not letting go.
Thanks and hoping for better times
Daniela - 0
Wolke63 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Daniela,
on the German MAC it is called "Festplatten Dienstprogramm" - so I would assume it is called Disk Utility or something in an English version. You find it in Programs / Dienstprogramme (which should translate to Utilities)
This should allow you to open the currupted sparse image - it will ask you for the master key of the encrypted image - and see what's in it - which means:
* what is still intact
* and what has been destroyedIf you manage to open the image, you can copy the undamaged data to another disk.
In my case the actual damage was negligible. The problem was more that you have to delete the corrupted image in full and then apply what you have saved before.
Good luck!
Wolfgang
- 0
Daniela van der Heijden ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Wolfgang, thanks, I think that is what we tried this morning with apple: from root user we were trying to repair the disk and then we tried to open it, which wasn't possible. That's when the supervisor of the lady I had on the phone wasn't very happy...
On some other thread somebody was successful with: (do you know anything about this Data Rescue II ? Thanks even for still talking to me ;("using Disk Utility, I went to File->New->New Disk Image from Device, and I selected my sparseimage and let it go. By doing this, it created a .dmg of my sparseimage in my selected location, which I'm guessing took the encryption off of the file. I believe this to be the case because when I tried to mount it, it didn't ask for a password, but it came up with the same 'No Mountable Filesystems' message.
I then went into Terminal and typed hdiutil attach -nomount /volumes/software/daniel.dmg (again, it asked me for no password) to attach the file without mounting it so that applications such as Disk Warrior could see it. However, Disk Warrior is not where I found the solution, as it came up with the same 'disk is too severly damaged' message as it had with the sparseimage. I had dug up a copy of Data Rescue II earlier in my failed attempts at recovery, and I decided to see what it could do with the new .dmg file, even though it failed to even recognize the attached sparseimage. This time, it not only saw the attached .dmg, but upon selecting the 'recover files' option, it showed me every one of my missing files in its correct location" - 0
yeeehaa ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I'm a bit of a novice...how did you solve your issue. Did you follow a previous discussion reply that had the steps?
- 0
joshenator ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
This might be helpful: http://joshscoolthings.wordpress.com/2007/10/28/leopard-update-very-important/