Imported from the Apple Support Forums via the Wayback Machine 🔗
Hello,
Currently I have 2 GB of ram in my macbook (2x1GB), and was looking at upgrading memory. I've heard there was some issues with doing the 3GB or 4GB (only 3.3GB usable) option such as the system just booting up to a black screen.
Who would you reccomend to buy the memory from; either the 2x2GB set or the single 2GB stick. Also, how much is the performance increase worth by using the 4GB dual channel mode instead of 3GB?
Imported from the Apple Support Forums via the Wayback Machine 🔗
You can put 4 GB in, but OS X will only see 3.2 GB (or something like that), this is due to the chipset. However having 2x2 in means it runs in interleaved dual-channel mode, which theoretically results in higher performance. If you did 2 + 1 it runs in asymmetric dual channel. However there are mixes results on whether running in interleaved dual channel or the fact of simply having more RAM available and running in asymmetric dual channel results in better performance. For example, it is argued, that if you use memory intensive applications, that having 2 + 1 GB would give better performance than only having 1 + 1 GB.
Basically, if you can afford to do so it would be best to get 2x2GB which would essentially give you the interleaved dual channel performance, even if only 3.2 GB is available.
Hope this is helpful.
0
First Magus·
Imported from the Apple Support Forums via the Wayback Machine 🔗
You can check the speeds achieved with different variations of RAM here.
Imported from the Apple Support Forums via the Wayback Machine 🔗
Who would you suggest buying the memory from?
0
First Magus·
Imported from the Apple Support Forums via the Wayback Machine 🔗
All three of these are good sources. Look them over and buy what you like best for the price. I prefer Crucial but OWC is good RAM.
OWC MacBook Ram and Hard drives
NewEgg.com Mac Memory
Crucial MacBook RAM
0
henizwhoa·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I thought late 2006 macbook model only support up to 2GB. Am I missing something?
0
First Magus·
Imported from the Apple Support Forums via the Wayback Machine 🔗
The Core duo can only hold and use 2 GB
The late 2006 MacBook is a Core 2 Duo can hold 4 GB of Ram but only use 3 GB. The matched pair gives optimum graphics response.
0
henizwhoa·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Thanks for your reply Magus. I have a mid 2007 macbook, model 2.16GHz MacBook
(MB062LL/A, also with core 2 duo and looking at the spec, it says only
Memory 1GB (two 512MB) of 667MHz DDR2 SDRAM (PC2-5300); supports up to 2GB
I thought only the late 2007 and up supports up to 4GB. Am I reading the spec wrong? Is it total up 4GB, 2Gb per bus?
0
First Magus·
Imported from the Apple Support Forums via the Wayback Machine 🔗
The official specs from Apple for the C2D state 2 GB of RAM. The C2D MacBook will hold more than what the spec says. This has been tested and works. You can check the test results for your MacBook with the different RAM configurations in the link I gave earlier.
0
abecker·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I got the 2GBx2 from Newegg. It was the mushkin brand, I'll let you know how it works. Do you forsee any issues?
0
emh2378·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Just to jump in here late...
I'm looking to upgrade my ram and was told the same thing, that i could only buy (2) 1gb to put into the slots. You're saying I can purchase (2) 2gb and it will only access 3.3gb, but is still better than 2gb or 3gb total?
Thanks!
0
vasili0s·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Seeing that you have a late model 2006 macbook (in essence a C2D) YES, you can run the 2X2GB peice memory chipsets on your macbook.