I cannot calibrate my battery
apple Verified ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hi!
I've got an 18-month old MacBook which, since a few weeks, will not go to "safe sleep" mode when trying to calibrate to battery; it will just shut down ("crashing"). Then I still can switch it on, as there is some power left, but then again it would not go to safe sleep. What I tried doing was to put it in sleep myself, but after the whole day, it would still have power...
I've got only 94 cycles, and after the last successful calibration (made less than a month ago), I had 4051 mAh (77%). Now it shows 59% (3087 mAh)! It was 89% in February...
At some point, I would also have my AC plug alternating between amber and green, even though the battery was full; but this strange behaviour seems to have stopped now.
Any advices on how to calibrate my battery, and perhaps restore some performances of it, would be greatly welcome. Thank you in advance.
15 replies
Sign in or join Beachball Help to reply.
- 0
First Magus ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Check and see if you have battery update 1.3 installed. Try these two locations for it. It will be one or the other.
MacBook/Library/System/Library/SystemConfiguration/BatteryUpdater.bundle
MacBook/System/Library/SystemConfiguration/BatteryUpdater.bundle
Tiger(10.4.11) installs it. It is the MacBook Pro update.
If it is 1.3 drag it to the trash and then reboot. After you reboot you will be able to empty the trash. Once you have done that run software update and it should install Battery Update 1.2. You should reset the
SMC (System Management Controller) after doing this.
- 0
bachbusoni ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Thank you, but how do I know if it 1.3?
(I've got it in MacBook/System/Library/SystemConfiguration/BatteryUpdater.bundle)Also, how do I know if I have reset the SMC well, as nothing happens after holding down the power button for 5 seconds?
And how will I make sure the software update installs version 1.2?
Sorry about those perhaps "amateurish" questions.
- 0
First Magus ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
bachbusoni wrote:
Thank you, but how do I know if it 1.3?
(I've got it in MacBook/System/Library/SystemConfiguration/BatteryUpdater.bundle)Right click and use the *Get Info* command. This will bring up a little window with all the info in it.
Also, how do I know if I have reset the SMC well, as nothing happens after holding down the power button for 5 seconds?
There is no indicator it just does it.
And how will I make sure the software update installs version 1.2?
When you run software update after removing the 1.3 bundle it will tell you it is installing Battery Update 1.2

- 0
bachbusoni ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I have done all now, and will post another reply when I see that my computer does calibrate properly (unfortunately it takes a while to calibrate, and I only have one computer, so I'll do it at night)
Another helpful advice to other readers of this post: I needed to be on an administrator account to get to know the version information, as described below.
First Magus wrote:
bachbusoni wrote:
Thank you, but how do I know if it 1.3?
(I've got it in MacBook/System/Library/SystemConfiguration/BatteryUpdater.bundle)Right click and use the *Get Info* command. This will bring up a little window with all the info in it.
- 0
bluebomberx ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I've had the same issues with safe sleep and finally called Apple today. They are replacing my battery under the extended battery warranty. I bought my MacBook in May of 2006.
- 0
bachbusoni ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
So unfortunately, the above did not solve my problem... (but it was close!)
My battery went down to 5%, then suddenly went up to 10%, so I was waiting, and at some point, at 1%, it shut down, so without going to "sleep". I was just using the finder and all other applications were closed. When I plugged it in this morning, I thought that perhaps I should try again, so before he finished login in, I unplugged it, and the computer went to sleep! Unfortunately, I really needed to use the computer this morning, so I could not let it for 5 hours like that...
Any other advice on what to do next?Unless the battery has got a special warranty, I just have a 1-year warranty for the computer. Will Apple still replace it? Thanks.
- 0
First Magus ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
How many cycles do you have on your battery?
Apple: Determining Battery Cycle Count
If it is under 300 cycles it is still under the warranty that covers your MacBook. If it is under 300 call Apple support about getting a replacement or go by an Apple store and talk to them.

- 0
bachbusoni ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I have now 95 cycles.
But according to Apple, my battery needs to have the following symptoms to be replaced:* Battery is not recognized causing an “X” to appear in the battery icon in the Finder menu bar.
* Battery will not charge when computer is plugged into AC power.
* Battery exhibits low charge capacity/runtime when using a fully charged battery with a battery cycle count (as shown in System Profiler) of less than 300.
* Battery pack is visibly deformed.Note: If your MacBook or MacBook Pro battery does not have any of the symptoms noted above, your battery does not need to be replaced.
Does my problem fit in any of those symptoms?
Will Apple still replace my battery?
By the way, my battery is now at 64%; it's changing all the time! - 0
First Magus ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
You need to talk to them and explain what is happening. My batteries problem was not on the list but was replaced by Apple as part of the program. Some people would try and get their batteries replaced even if nothing was wrong with it. Yours has a legitimate problem so it is worth talking to them. Be polite but firm and you should be OK.

- 0
bachbusoni ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I'll try that. Thank you!
- 0
First Magus ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
One point. Have the link to the update page that gives this warranty extension handy so whoever you talk to can look it up if their not familiar with it.

- 0
bluebomberx ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
My computer is a first generation Macbook from May 2006 and they replaced the battery free of charge for me. I just called them on Thursday morning 1/10/08 and my battery arrived this morning 1/11/08. That's fast!
- 0
First Magus ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Wow I thought mine was fast. Took me three days for mine:->
One of the things I like about Apple

- 0
bachbusoni ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I've called Apple today, and they'll me a new battery!
So I suppose my problem will be solved, but I'll let you know if it isn't the case.
Thank you all for your help and advices! - 0
bachbusoni ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
So that's it! I've got my new battery, and I've sent back the old one.
Concerning the calibration, I don't know yet if it works, as I haven't done it yet (it's not a month I'm using it, so it's unnecessary). Check at
http://discussions.apple.com/thread.jspa?threadID=1345356&tstart=0 if you want to find out how to use your battery properly.I've got 1 cycle and my battery's capacity is 5197 mAh, which hopefully will get to the full 5200 mAh, after a few cycles or calibrations (?).
Thank you all again!