Benches MacBooks

15

Santa Rosa MBP & Defective Airport on Battery

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

Hello all,

I have been talking to Level 2 Support on my MacBook Pro and per their support, I have replaced my machine for the third time. However, the same problem still exists:

When I am connecting to WEP secured networks on AC power, I have absolutely no issues. My speeds over the network and Internet are as fast as they should be.

However, when I unplug the Magsafe adapter and run off battery, within 2 to 10 minutes, I will lose connectivity to any network resource and Internet connectivity. Yet I still have an IP address, full signal, and my router can see my computer online.

To get back on the Internet, I have to restart my router and it will work again for 2 to 10 minutes before the same things happens. I can also restart my computer or turn off/turn on my Airport for another 2 to 10 minutes of connectivity.

If I plug my computer back in with power, the issue seems to go away after turning off/turning on my Airport or following any of the above solutions.

Level 2 support keeps having my replace my system under the 14 day swap policy but I know this has to be a driver issue since EVERY machine has this problem. Does anyone have a clue what the heck is going on?

For the record, my home network is a 2Wire Gateway/Router supplied by my ISP, Embarq. It works with every other Intel or PPC mac we have battery or AC powered. It is also using the latest firmware for this model 2700HG-S. Since this works with my MBP while on AC Power, I doubt this is their issue but an Apple problem.

Help! I am tired of returning this machine every 14 days.

15 replies

Sign in or join Beachball Help to reply.

  1. 0

    a brody

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Try altering the channel that is on the router to a different channel. Someone in the neighborhood might be broadcasting too much traffic on that channel, and causing a problem.

    Of course tune in your airport setup to receive on that channel too, and not use an automatic connection.

    If uncertain how to do this, you might want to contact 2Wire and let them know you have this issue. Someone else found changing the channel solved their problem.

    Also make sure your airport software is up to date, from
    http://www.apple.com/swupdates/

  2. 0

    Kaleb Rutherford

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Try altering the channel that is on the router to a

    different channel. Someone in the neighborhood might

    be broadcasting too much traffic on that channel, and

    causing a problem.

    Of course tune in your airport setup to receive on

    that channel too, and not use an automatic

    connection.

    If uncertain how to do this, you might want to

    contact 2Wire and let them know you have this issue.

    Someone else found changing the channel solved their

    problem.

    Also make sure your airport software is up to date,

    from
    http://www.apple.com/swupdates/

    I have already tried multiple channels with the same result. I am currently using Channel 11 but have tried them all. Also, I have already downloaded all available software updates.

    Again, this is my Third Machine I have gone through with the same exact issues. I am guessing that Level 2 support will tell me to trade in the machine for another one.

    I have done a clean format and install on each of the machines. However, for this latest one, I tested it out without migrating my user data. It still did not function.

    Any other ideas?

  3. 0

    Kaleb Rutherford

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I should also mention that I live in a small area and there are no wireless networks around me. I am the only Internet connection even close by.

  4. 0

    Kaleb Rutherford

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Another thing to note that is if you can get the Airport work while on battery, if you plug in the power cord for a few minutes and then disconnect it, you will lose network connectivity within 2 to 10 minutes again.

    This is the most frustrating thing in the world. A MacBook that costs half as much as this machine has more reliable wireless networking in it.

  5. 0

    a brody

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Were you using the same battery on all of the notebooks? Perhaps it is the battery that is faulty.

  6. 0

    Kaleb Rutherford

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Were you using the same battery on all of the

    notebooks? Perhaps it is the battery that is faulty.

    Yes, all three Santa Rosa MacBook Pros only drop the wireless signal when using battery.

  7. 0

    a brody

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Try a different battery. Take it to the store, and plug in a different battery and see if the problem persists.

  8. 0

    Kaleb Rutherford

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    But I have already tried 3 different batteries in 3 different machines...

  9. 0

    a brody

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Then clearly the problem is the wireless router is broadcasting a non-standard signal.

    2Wire needs to hear about it.

    Don't worry this problem is not isolated to Macs. Even HP can't make 64 bit Athlons compatible with Netgear PCI WiFi cards. Netgear admits their hardware doesn't work with 64 bit PCs running XP Home.

  10. 0

    Kaleb Rutherford

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    That does not make sense because it works just fine with every other Mac (Intel or PPC) and it works with the new Santa Rosa MBP as long as it is powered by the AC adapter. This is clearly an Apple issue.

  11. 0

    a brody

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    The PowerPC and Intel versions of Mac OS X are quite different.

    The problem here is that wireless chipsets have changed, and not everyone has caught up. If it were an Apple issue alone, that wouldn't explain why Hewlett Packard couldn't handle Netgear's 64 bit WiFi. The standard as in the other thread has been said has not been finalized. Until it is, there will be inconsistencies like this. 2Wire needs to be informed of the issue. Other 802.11n routers work fine on MacBook Pros.

  12. 0

    Kaleb Rutherford

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    This is not a N router. It is a B/G router.

  13. 0

    jmitro

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Kaleb,

    Others are having the same problem, me included. Computer connectivity works fine plugged in but airport crashes the computer within just a few minutes of being unplugged.

    Another thread "Airport crashes computer running off battery," shows that reverting back to 10.4.9 solves the problem. but that's not really a solution, only a workaround until apple fixes whatever they did in the latest update. I really don't think this is a router issue, i think it's the airport card. but i'm no expert and am pretty much a newbie on macs. I inthend to switch back to 10.4.9 if apple doesn't come out with a fix soon.

    jim

    17 MBP 2.33Ghz 2G, 2WIRE gateway router Mac OS X (10.4.10)

  14. 0

    Kaleb Rutherford

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    With the Santa Rosa MBP's, the same issue exists with 10.4.9 as well.

  15. 0

    jmitro

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    that is troubling. i don't really want to get rid of my 2wire and i'm sure it's not the problem. all of my other computers, pcs, run off of it just fine, and my mac ran off of it just fine until the 10.4.10 update hit. as i see it, it's apples problem, not 2wire. if we're lucky maybe they'll recall the card like they did the batteries after that battery update killed them. Heck, there have got to be a lot of ATT/DSL customers out there using 2wire and macs. It's probably going to take a while for them to unplug their machines and find out they have a problem.

    jim

    17 MBP 2.33Ghz 2G, 2WIRE gateway router Mac OS X (10.4.10)