Benches MacBooks

9

Can't reboot -- chimes repeat over and ov…

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

I put a CD of jpegs in my dvd drive and copied them into iphoto. I copied them again to a new folder on my desktop. Then I tried to open the applications folder from the dock. The screen flickered and the programme icons did not appear. The screen just flickered every few seconds. The mouse moved across the screen but nothing responded to a click.

I turned the mac off using the reboot button. On rebooting I got the opening chime over and over at about a 2 second interval, and the disk drive whirrs, but the screen stays blank -- the machine does not boot up. The disk is still inside the machine.

I would be really grateful if someone can suggest how to remedy this situation! thank you.

9 replies

Sign in or join Beachball Help to reply.

  1. 0

    Kappy

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Try booting into
    single-user mode. Once you get to the prompt enter:

    /usr/bin/drutil eject

    Then press RETURN

    This should eject the disc in your optical drive. To restart the computer enter:

    reboot

    Press RETURN

    If the computer will not start up then there are damaged system files probably corrupted during the abnormal shutdown you were forced to do. Nevertheless you need to repair the drive to be sure it's OK:

    Repairing the Hard Drive and Permissions

    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer. Now restart normally.

    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

    If the drive is OK but you still cannot start up, then you will need to reinstall OS X.

  2. 0

    Kappy

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    The next things to try:

    Resetting MacBook and MacBook Pro System Management Controller (SMC)

    Reset PRAM and NVRAM

    I would also see if you can run the hardware diagnostics:

    How to run hardware diagnostics for an Intel Mac

    Boot from your original OS X Installer Disc One that came with your computer. After the chime press and hold down the "D" key until the diagnostic screen appears. Run the extended tests for a minimum of two or three hours. If any error messages appear note them down as you will need to report them to the service tech when you take the computer in for repair.

    Some "common" error indicators:

    SNS - sensor error

    MEM - memory error

    HDD - hard disk drive error

    MOT - fan error

    If you cannot get the diagnostics to run and neither of the two above resets help, then you've had a hardware failure and need to take the computer in for service.

  3. 0

    Kappy

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Try booting into
    single-user mode. Once you get to the prompt enter:

    /usr/bin/drutil eject

    Then press RETURN

    This should eject the disc in your optical drive. To restart the computer enter:

    reboot

    Press RETURN

    If the computer will not start up then there are damaged system files probably corrupted during the abnormal shutdown you were forced to do. Nevertheless you need to repair the drive to be sure it's OK:

    Repairing the Hard Drive and Permissions

    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer. Now restart normally.

    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

    If the drive is OK but you still cannot start up, then you will need to reinstall OS X.

  4. 0

    Hilary Wright1

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Many thanks for this response. Unfortunately I have had no luck. This is what happens when I try to start up in single user mode:

    I press the reboot button and then Apple-S. Immediately I hear a long loud beep, followed by the chimes repeating every 2 seconds. The screen stays black. I have tried rebooting several times with different time intervals before pressing Apple-S, but all get the same result.

    Any further suggestions would be much appreciated. Thank you.

  5. 0

    Kappy

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    The next things to try:

    Resetting MacBook and MacBook Pro System Management Controller (SMC)

    Reset PRAM and NVRAM

    I would also see if you can run the hardware diagnostics:

    How to run hardware diagnostics for an Intel Mac

    Boot from your original OS X Installer Disc One that came with your computer. After the chime press and hold down the "D" key until the diagnostic screen appears. Run the extended tests for a minimum of two or three hours. If any error messages appear note them down as you will need to report them to the service tech when you take the computer in for repair.

    Some "common" error indicators:

    SNS - sensor error

    MEM - memory error

    HDD - hard disk drive error

    MOT - fan error

    If you cannot get the diagnostics to run and neither of the two above resets help, then you've had a hardware failure and need to take the computer in for service.

  6. 0

    Hilary Wright1

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    This would be great, if only I could eject the CD stuck in the drive! Any suggestions about how to eject the CD so that I can try this? Holding down the mouse on startup does not work.

    Many thanks.

  7. 0

    Kappy

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    No, I don't know how to get the disc out since you cannot get the machine booted. It's possible to mechanically do it, but if you don't know where the mechanism is then you could end up damaging the drive. If you check at the left or right side of the optical drive's slot look for a small pinhole. If there is one, then you can use a stretched out large paper clip to push on the eject mechanism and release the disc.

  8. 0

    Hilary Wright1

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Sorry for delay in replying -- access to internet problematic at the moment! Took Mac to Apple store where Genius diagnosed faulty logic board and kept the machine for repair. Thank God for Applecare!

    Thanks for persevering with solving this problem, I truly appreciate it.

  9. 0

    MacPhelim

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Could this be the same problem others are having?

    http://discussions.apple.com/thread.jspa?threadID=2453286&tstart=0

    http://discussions.apple.com/thread.jspa?threadID=2452875&tstart=0

    http://discussions.apple.com/thread.jspa?threadID=2453715&tstart=0

    It is odd that several would have the same problem at the same time. If it is a logic board problem, odd that it would go bad at the same time for several people.

    Message was edited by: MacPhelim