Benches MacBooks

10

Macbook Pro USB Ports Suspended

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

I have a serious problem with my Macbook Pro Late 2008, I plugged a cooling fan to one USB port and suddenly the computer restarted, no previous message, no warning, then on loggin screen I got this message

"Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled.

To prevent damaging your computer, the USB device drawing too much power has been disabled. Other devices may have also been disabled. When you disconnect the device drawing too much power, your other USB devices will be enabled again"

So, that "again" has never happened, ever since I startup my Mac I get this message and none of the two USB ports are working.

http://farm5.static.flickr.com/4011/4645855029_d22ea852ff.jpg

Things I have tried already.

- Restart in Safe mode (no change)

- Run diagnostics (everything seems alright)

- Restart PRAM (no change)

- Restart Power Management - removing battery and hold power button for 10secs without it (no change)

- I have tried the USB Prober tool and it tells me that my USB ports are Suspended (an amount of 3 (three) of them seems to be on that status)

The suspended USB ports are: IR Receiver, Built-in iSight, and BRCM2046 Hub

The only thing I have not tried yet, is to reinstall the OS, but I don't think that it is a matter of OS problem or could it be?

Comments?

Message was edited by: Ruriglen

Message was edited by: Ruriglen

10 replies

Sign in or join Beachball Help to reply.

  1. 0

    eww

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Reset your System Management Controller:

    http://support.apple.com/kb/HT3964

    If that doesn't do the trick, you'll probably need a hardware repair.

  2. 0

    Ruriglen

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I already tried that out, and nothing changed, at first I thought that maybe there was something I could do to change the suspended mode in wich the USB seems to be but I don't find anything that explains how to resume a suspended USB port.

  3. 0

    eww

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Resetting the SMC usually reactivates a suspended port or ports, and that's why I think you're going to need a hardware repair. I suspect your external cooling fan or its USB cable is defective, malfunctioning, or just very poorly designed, and has fried your port or ports. I recommend returning it for a refund if possible, or not using it again if you are stuck with it.

    Run the Apple Hardware Test that you'll find on one of the DVDs that came with the computer. If AHT reports any problems, make a Genius Bar appointment at the nearest Apple Store, or phone AppleCare to set up a repair.

  4. 0

    S.U.

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Welcome to Apple Discussions!

    See if this does any good:

    http://support.apple.com/kb/HT1317

    Good luck!

  5. 0

    Ruriglen

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Thanks S.U. But your suggestion didn't help, I'm beginning to think EWW it's right, I might have to make an appointment at genius bar. But I will reinstall the OS just to make sure.

  6. 0

    eww

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Before you spend your time reinstalling the OS, please run the Apple Hardware Test. If your ports are dead, it will tell you so.

  7. 0

    memberseven

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    hey I'm having the same problem as you, something fired my ports and my left 2 usb ports are suspended tried everything still doesnt work, is your problem solved yet? and did you notice that your suspended usb ports are heating up like crazy? my left side of my macbook pro where the ports are are really heating up.

  8. 0

    eww

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    memberseven: Shut your machine off completely, and leave it off until it has been repaired. Something has shorted out, and you may now have a fire hazard or risk additional damage to your machine by continuing to run it. The root cause of your problem may be different from the one with which this thread is concerned, since Ruriglen has said nothing about his ports being hot. Make a Genius Bar appointment or call AppleCare ASAP.

  9. 0

    memberseven

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    hey thanks for the suggestion but do you think it should be alright if I just replaced the I/O, magsafe board, since its only the ports heating up. i suppose it should be the only problem?

  10. 0

    eww

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Do what you like, but I'd have the machine checked out thoroughly instead of just assuming something.