Windows 7 install and/or environment free…
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hello! Long post, trying to give as much detail as I can... thank you in advance for your help on this!!
I think I posted in the incorrect forum earlier -- reposting here where it's more relevant.
I have a frustrating issue I've been battling all weekend. I can't seem to figure it out.
I'm trying to set up dual boot (Boot Camp) on my new 13" MacBook Pro, installing Windows 7. I've tried x64 (preferable) and x86. This is the mid-April 2010 13" MacBook Pro. C2D 2.4GHz, 4GB RAM, 250GB HD, nVidia 320M.
The problem I'm having is the machine is hard-locking. Sometimes it locks up during install (the 2nd phase, after it restarts and is "Completing Installation" (this step:
http://spsexton.files.wordpress.com/2008/11/install-13.jpg). This makes me have to restart the installation completely, which is frustrating. Sometimes it locks up at the login screen. Sometimes it locks up once I'm logged in to Windows.
I have noticed that if the installation completes and I can get to the desktop, I can generally use it OK until I install the Boot Camp Drivers (3.1, from the 10.6.3 install DVD). I had a hunch and had also read that it may have to do with the nVidia drivers it installs, so I have tried uninstalling those prior to restart. It locks up anyway at restart (during login). Note that this generally is the case -- sometimes it locks up before I even get to the Boot Camp Drivers step. I sometimes can then get in to Safe Mode without it locking (sometimes it does, sometimes it doesn't), and I think I had some repeated errors in the Event Viewer that appeared erroneous (certainly not errors that should cause a hard lock) -- I can post these if needed when I get home from work this evening.
I was having consistent lockups during installation (at the "Completing Installation" step I mentioned above) when I'd let the Boot Camp Assistant set up the partition for me. I thought BCA might be doing something funny, so I set up the partition myself using Disk Utility then installed, and the install went in OK, however I still had it lock up after installing the Boot Camp Drivers.
Here's the steps I've been following:
1. Partition drive, either using Boot Camp Assistant or Disk Utility. Format to FAT if using Disk Utility.
2. Boot into Windows installer
3. Format drive to NTFS in installer
4. Install
5. Reboot
6. Complete install (often locks here as mentioned above)
7. If install completes, boot in to Windows
8. Change some system settings -- temp folders, workgroup name, pagefile size, turn off UAC
9. Reboot
10. Install Boot Camp Drivers from DVD (sometimes locks before I get here)
11. (have tried sometimes) Uninstall nVidia drivers installed by Boot Camp
12. Reboot
13. Consistent locks
14. Start over, both trying a new Partition creation (delete old, expand Mac partition, recreate new partition via BCA or DU), or using existing partition
Some other details:
1. This environment seems to work fine via Parallels. I only appear to have locking issues if I try to boot natively.
2. The Boot Camp Drivers installs a bunch of driver crud for devices the machine does not have. Could this be causing an issue? Drivers that Windows is attempting to load and failing, thus causing issues?
3. I'm mainly trying to install x64 due to the 4GB of RAM -- could this be an issue with the Boot Camp Drivers and Windows x64?
4. I don't think this is a motherboard issue as the machine is completely stable otherwise -- I'd think that if it was a hardware failure, especially with the motherboard, I'd see other issues elsewhere..
Any ideas??? I'm pulling my hair out on this one. The machine is brand new (just got it Tuesday last week, just started using it this last weekend). My last MacBook Pro (previous model 13" MBP) took Windows 7 without a single hitch and ran smooth as butter.
Help?
15 replies
Sign in or join Beachball Help to reply.
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0