Benches MacBooks

3

MacBook Pro 15" with external display - b…

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

Hello everyone,

I have a MacBook Pro 15" and my father has 17", both 2007 model.

I bought a new Samsung XL2370 external monitor (1920 x 1080) for my notebook. When I connect it to the 17" model, it works fine and gives me the full picture.

However, when I connect it to my 15" MBP, even at 1920 x 1080, the display gets cropped on two sides with black bars.

If I change the resolution to 1680 x 1050, then the whole screen is filled. But if I put it to 1920 x 1080, the picture gets reduced on right and left.

What am I doing wrong ?

Many thanks for your help.

3 replies

Sign in or join Beachball Help to reply.

  1. 0

    BSteely

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    That's possibly a result of a setting on the Samsung itself. Go into the Samsung's menu system and see if there is a setting for picture size. It sounds like the Samsung is setting itself to a "4:3" aspect ratio for some reason.

  2. 0

    Gorilla Power

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hi BSteely,

    I was wishing to receive a reply from you, since I saw you solved many problems on the forums, thank you 🙂

    I got it working just sometime back. It was very strange, I messed around with the Color profiles, selected ProPhoto RGB and it suddenly added a new resolution entry under Displays. Although both are identical, if I select the second 1920 x 1080 of the two (see :
    http://dl.dropbox.com/u/828053/Picture%201.png), it still gets me back to the scaled screen. If I select the first one, it works fine. I still don't understand what could have triggered this.

    Also, any JPEG picture seemed to be really messed up on the screen shortly after I fixed it. Red & oranges were way out. I calibrated the display and things started to look better. But there was one strange thing I discovered, in the dashboard, the color of the widgets remained unchanged (and "dirty") even after calibration. Only if I added the same widget afresh, it would change !

    Here's a comparison of the calculator :
    http://dl.dropbox.com/u/828053/Picture%202.png.

    Thanks a lot.

  3. 0

    Jobbaman

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hi all,

    I'm having the exact same problem with my 22" 1920x1080 VGA TFT connected to my MBP 15". Strange thing is that it does show the picture correctly after I reboot the system. After this I can disconnect and reconnect the monitor without any problems. Though, as soon as I hookup my MBP to my HDMI flatscreen at home and afterwards I connect it again to my monitor, the problem is back and I have to reboot again... how annoying