Benches MacBooks

14

Finding out hard drive load cycle count

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

How can you find out the load cycle count of your hard drive? Is there a program that you must download?

14 replies

Sign in or join Beachball Help to reply.

  1. 0

    khassani

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    There is a commercial product that does:
    Smart Utility

    or an open-source one (I've never used it though):
    S.M.A.R.T. Monitoring Tools

  2. 0

    AdamCanada

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Thanks for the links. I downloaded the free trial of SMART Utility and it said that I had around 6500 cycles and I have only had the computer for one day. What is the normal count of a drive? Also I have been monitoring the count for the past half hour to an hour and the count has increase by about 40-50. There seems to be times when it will increase fairly quick and then if will not increase for a while.

    Also I have not heard constant clicking or beeping that some others have reported.

    Thanks

  3. 0

    khassani

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Sorry, but I've exhausted my knowledge on the subject by providing those links 🙂

  4. 0

    rollerball

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    6,500 cycles is high if you've only had it for 1 day. If your count has been increasing 40-50 per hour than you're probably getting those clicks (the sound of the HDD head parking repeatedly due to OSX power management) but just too faint to hear.

    If you're concerned about reaching your load cycle count prematurely you can download HDAPM which is a script that allows you to manually control that head parking "feature".

    I'm obligated to say use at your own risk.

  5. 0

    AdamCanada

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Thanks a lot but just a few more questions. Can you briefly explain why the head parks? I heard that it is from the motion sensor parking the head to protect it. Is the OS also causing it to park to save power?

    Also I went to the energy saver options and tuned the option to put the hard disks to sleep off. Is that a good idea?

    And finally I recently have heard a odd click when I did bump the computer so I believe that that was the motion sensor so if that was the head parking because of a bump what would be the reason for the high load count?

  6. 0

    rollerball

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I believe it's a power management thing, however when the head is parked it certainly is more protected so that could be another possible explanation. The question remains as to what kind of protection that offers when the head is re-parked over and over as opposed to longer sustained moments of inactivity.

    (shrugs)

    I've found that turning off the energy saver options has no effect on the load cycle/head-parking thing.

    No, a single case of bumping your computer shouldn't result in an unusually high load-cycle count.

    I've been using HDAPM for awhile now and I'm happy with it, however the primary reason I use it is to reduce that clicking noise. I've no real idea as to the long-term effects of keeping my HDD spinning at max speed all the time, however my load cycle count is under control and the clicking noise has stopped so I'm content.

  7. 0

    carl wolf

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    "Can you briefly explain why the head parks?"

    To protect the surface of the HDA media.

    "I heard that it is from the motion sensor parking the head to protect it."

    The "motion sensor" is "how", not "why". "To protect it" is why.

    Is the OS also causing it to park to save power?

    "Also I went to the energy saver options and tuned the option to put the hard disks to sleep off."

    It is a great idea only if you want to shorten the battery life.

    "I recently have heard a odd click when I did bump the computer so I believe that that was the motion sensor so if that was the head parking because of a bump what would be the reason for the high load count?"

    Could be and, interestingly, your final comment addressed the "why" and "how" of the head parking scheme.

  8. 0

    rollerball

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    "To protect the surface of the HDA media."

    If it protects the drive, what is the purpose of re-parking the head over and over? This occurs regardless of whether the computer is idle.

    "Could be and, interestingly, your final comment addressed the "why" and "how" of the head parking scheme."

    I still disagree with this, not sure how a single bump could result in a load cycle count of over 6000 in a single day of use.

  9. 0

    AdamCanada

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I believe that the 6000 cycles were there before. So what is a normal amount of cycles for a drive?

  10. 0

    Doc_

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I don't know what normal is, but I've got 2,372,947 load cycles over 6583 hours - or about 1 load cycle every 10 seconds. My Macbook Pro is about 3 years 3 months old.

  11. 0

    Guilor

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    My Macbook's Load Cycle Count is around 1 every 30 seconds when idle. I find you can 'arrest' the count by keeping the machine busy with an application running in the background. I found that by opening ITunes and keeping it running on mute whilst minimized kept my Load Cycle Count where it was when I turned the machine on. No idea if this will cause other hard drive problems though, as it's constantly running ...?!

  12. 0

    Michael Black

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    For reference, Hitachi's note on the subject

    http://tinyurl.com/mcx6t

    (above takes you to, for those where the long URL displays properly
    http://www.hitachigst.com/tech/techlib.nsf/techdocs/9076679E3EE4003E86256FAB0058 25FB/$file/LoadUnloadwhite_paperFINAL.pdf)

    One thing I did not know, but got from that article:

    "Parking the heads on the ramp, or “unloading” the heads,

    became the foundation of advanced power management

    modes including Active Idle, Performance Idle and Low

    Power Idle, implemented under Enhanced Adaptive Battery

    Life Extender™ (Enhanced ABLE). Usage of Enhanced

    ABLE can provide as much as a 20 percent reduction in

    power consumption at the drive level."

    So, disabling HD sleep should reduce load cycles, I'd guess, at the expense of draining the battery quicker.

  13. 0

    Guilor

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Ah ... this Load Cycle Count arrest method described early has failed. In the last hour, the Load cycle Count has started to climb again ?!

  14. 0

    Guilor

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    UPDATE !

    Confused now. Okay, running ITunes in the background doesn't 'arrest' the Load Cycle Count on my main machine (Macbook 250gb Fujitsu drive with Snow Leopard) as previously thought. However, I just tried it on my second machine (Macbook 250gb Western Digital drive with Tiger 10.4.11) and it DOES work ! Using SMART Utility 2.1 I have monitored the machine for over 2 hours with NO increase in Load Cycle Counts.