Attempt to burn disc failed.
apple Verified ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I was burning a CD with iTunes and I tried multiple CDs and got the same message:
"The attempt to burn a disc failed. The device failed to respond properly, unable to recover or retry."
Thanks!
15 replies
Sign in or join Beachball Help to reply.
- 0
JMF ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Try a different brand of media. If what you are using is really cheap stuff, that could be why it doesn't work. I highly HIGHLY recommend going with Verbatim brand of CDs and DVDs. And avoid Memorex. I've had bad luck with them in the past. If Verbatim media doesn't work, then your drive is probably bad.
- 0
wowSTRIESuRock ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I was having the same issue and I didn't feel like going to the store to buy a new set so i lowered the write speed to 8x in preferences and it fixed it for me.
- 0
willyboomer ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I was also having this issue. I've been using Fuji Film CD's and while I have read to use a "higher quality" CD, I've used this brand CD for a long time and have never had a problem burning a CD with iTunes till about two weeks ago. It doesn't make sense for me to have to buy different CD's when these worked three weeks ago. Why wouldn't I have the same issue with other CD's?
I've tried lowering the burn speed to X8 and it didn't work for me.
I've also ran an extensive Apple hardware test and nothing faults came up.I'll appreciate any help I can receive. Thank you.
Will
- 0
dmaninmachine ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I've been trying to fix this problem along with a couple of others on the Macbook Pro that I'm currently using.
There seems to be a great reluctance amongst the Mac user community to concede that these machines are not above being "prone to failure". Just as many seem to hold true that Japanese cars are superior to American, it's a myth.
Based on the comments I've found on these forums, I see that many have had the same issue as I have but no one states the likelihood that the drive has failed. I've had two (LG DVD-R) that have failed or partially failed (burner turned to read only unit).
Many have had this warning or that the laser cannot be calibrated (or something to that effect).
I have recently updated this version of OSX (not having done so in about a year - updates seem to lead to more problems I've noticed) as I am traveling and did not want issues with connectability through wireless internet access points.
This last update could have caused the problem, although I'm not sure as I do not use this laptop for burning and cannot recall the last time.
Assuming
1. It was not the update
2. I've tried three different disk (a cheapo DVD+R, a cheapo CD-R and a Sony CD-R)
3. The application used is not the problem - I was using Burn (I could try another burning application)
4. The drive is cleanthen the drive is either broken or I've missed something integral here.
I would try Ubuntu 8.04 on a second partition if it hadn't been for the fact that I can't burn a copy and I don't have time fooling around with flash drive configurations.
Anyone want to add something different or simply rewrite what I've put down? (I realize there is a partial hypocrisy to the question)
- 0
rebelyell2k5 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Here is the solution for me, it fixed mine. Just remove all AAC types from your playlist.
- 0
Josh Dulberger ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Reducing the burn speed to 4x seems to do the trick. I had read that 8x might work, but had no luck at that speed.
- 0
Montero ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Same problem here. So irritating...and inconsistent.
- 0
IvorMac ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I've made quite a few coasters recently trying to burn CD-R's in iTunes and getting the 'burn disc failed' message. CD-RW's burned OK and I've subsequently read it's a different process which made me think the laser for CD-R's was faulty. Tried different brands of disc but no luck and thought a trip to the local Apple Store was called for. As a last resort I tried what perhaps should have been an obvious option - a CD lens cleaner. Guess what - it worked. So for anyone with this issue it might be worth trying this in case the problem is as simple as a dirty lens. (I've only burned one disc so far so hope it's not just a fluke result!)
- 0
DBAG65 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I have the same problem. I don't often burn things but needed to this weekend. I tried several different routes to initiate the burns, no go.
I tried different OS's. I get similar, though worded slightly different, errors using Windows 7 and Ubuntu which I run in VirtualBox.
Newest issue. It will at least try to burn a DVD, CD's it just spins a few times then spits right back out.
Off to the Apple store I guess. I suspect it's a defective drive.
- 0
guitargeek9 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
yeah. i had to keep lowering the write speed on mine. one disk that i put in started spinning SUPER fast on its own and started making a loud buzzing sound in the drive. I don't know why... but iTunes froze and i had to restart everything. I just put my computer in to get a new optical drive in today.
- 0
sedmonds ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Strange, no answer from a mod.
I too have been experiencing epic disc burn fails.
Problem: Attempted to burn a disc image using the Disk Utility and received:
"Unable to burn "<disc name>". (The device failed to calibrate the laser power for this media.)
***?
- 0
OneCatFamily ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
LOL... Yeah, strange indeed! I've been battling with these guys (and ladies?) for a while now, and they seldom play ball...
Look, for what it's worth, there are lots of posts and threads about that kind of problem on this forum, and on others, and Apple's obviously decided to lay low and hope it'll simply go away.
I started a new topic to poll users in this forum about all the hardware issues they were having, but the topic in question was "deleted by host" because "these forums are intended for technical questions that can be answered by the community. We want everyone to be able to contribute to our forums and have their issues addressed"... (verbatim)
Of course, a centralized topic where users (customers, let's don't forget it) can mention ALL their hardware issues would be a bit more difficult to ignore than countless little posts disseminated all around the forum...
FYI, my original post said (again, verbatim):
"I decided to post here because the subtitle said "If it doesn't fit the other categories...")
Hi gang!
As promised, I'm launching this thread to help inventory the various problems us customers are experiencing with our Apple hardware.
The goal of this topic is NOT to give Apple a brown nose or to rub it in where it hurts. It's just a manner of knowing how many of us have occasional or long-lasting problems, and if so, what they're related to.
To post on this thread, you should give a short history of your problems, the measures you've undertaken to solve them (including calling on AppleCare or retailers' aftersales services), and the Apple Discussion forum category they would fall under. Please don't digress (I won't discipline you if you do, though... I've been known to be a rambler myself...), keep it short and to the point.
And share your experience!
I hope the mods will play the game and won't nip this one in the bud...
OK, guys (and ladies!), the floor is yours!
Message was edited by: Didier Caizergues, who's tired at the end of a long week, and should read his prose before posting..."
Well, I got my answer...
As to my own hardware issues, they've largely been solved thanks to an extended warranty I'd subscribed with the French retailer who sold me my MacBook Pro: a logic board replaced last summer, a new SuperDrive now, but when I got my machine back, I noticed that I'd rather not close the lid all the way down, since the magnetic latch seems to have been misaligned when they put the computer back together after maintenance...
But I can now read and burn optical disks!!!
- 0
StaticFlux ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Here's what I found works for me...
1. Shutdown
2. Zap the PRAM
3. Make sure the titles in the name column in your playlist is fully readable (no partial names showing in the column)
4. Make sure the total time for your playlist does not exceed the play time for your CD-R media
5. Follow the normal routine for burning a Playlist to CD-R
6. Select the 4X speed if you have 2GB or less RAM installed; 8X speed if you have 4GB of RAM installed
7. burnmy suspicion is that resources necessary to create/encode to CD audio format and simultaneous recording, exceed the system capability to burn at the maximum device (CD/DVD-RW drive) speed ... this has worked for me, ymmv. good luck.
-static
- 0
Christina Hung1 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Zapping PRAM fixed this problem for me. I began having trouble after a system upgrade to 10.5.7 (clean install).
- 0
Krysia322 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
First I tried burning at 8X speed as mentioned in a prior post with success times 2.
I tried zapping the PRAM (for those who don't know how, you hold the command, option, P, and R keys down simultaneously after shutting down your computer, then turn your computer back on. Keep holding down the keys until you hear the start-up sound again, then let go).
Using Verbatim CD-Rs on a MacBook 10.5.8, iTunes version 8.2.1 (6)... After reseting the PRAM, I was able to burn 3 discs using "maximum possible speed". Then:
**The attempt to burn disc failed. The device failed to respond properly. Unable to recover or retry.**
So I tried again with a fresh disc using 8X speed (we have 4G RAM on this machine), and got the same error (this time I knew I would before the error message because I could
hear it).Tried resetting the PRAM again and burning on 8X. Same error message. 😟
At least it's a step up from the old error message we kept getting last month of "The disc can't be burned because the device failed to calibrate the laser power level for this media."
Let the record show... I'm reluctant to take it in because I keep thinking it's a system update error; we'd had no problems until we upgraded iTunes & the OS via Software Update. I keep hoping that our concerns will be addressed with the next update. But if not... we'll have to take it in.
It's also interesting to me because I've never, in the 25 years I've had a Mac, had this problem with my Macs made entirely by Apple. My laptop is a PowerBook PowerPC G4, and I've never experienced the problems my husband, my mom-in-law, and my mom have on their Intel Macs.
Just saying.