Benches MacBooks

9

How should I clean a matte display?

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

I have the 15" Macbook Pro with the antiglare coated or matte display. How should I clean the display?

9 replies

Sign in or join Beachball Help to reply.

  1. 0

    neuroanatomist

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Apple recommends plain water and a clean cotton microfiber cloth, which works quite well:

    http://docs.info.apple.com/article.html?artnum=60446

    You can also use something like
    iKlear (tested and approved by Apple), or combination wet/dry cleaning packs for LCD screens (available from most office supply stores). I use the latter, and they work fine.

    Hope this helps...

  2. 0

    MellowmanB

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I tried cleaning my matte display with plain water and a clean cotton microfiber cloth but the display is still kind of streaky. Any advice on how to get rid of the streaks?

    I have some iKlear, but I'm not sure if it is OK for matte displays. On the back o the packaging it mentions that iKlear is good on MacBook Pros for "Glossy TFT or LCD Screen". It doesn't mention if it's good for matte displays. Does anyone know for sure if you can use iKlear on a matte display?

  3. 0

    Courcoul

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I've never had problems cleaning my screens using a water-dampened 3M ScotchBrite microfiber cleaning cloth to wipe off all the dirt and immediately after drying them with a soft lint-free cotton cloth. In other words, don't let the moisture (no matter how wrung out the damp cloth is) dry out on the screen, cause you will get streaks. This has worked out just fine with my ancient TiBook, my old PBook and my new MBP.

  4. 0

    Dan Bell

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    What about the black cloth that came with the MBP?

  5. 0

    Doovydoo

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    or any soft cloth or sweatband

  6. 0

    digitalart

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Yes, I always used iKlear for my high res LaCie 321 matte monitor and my MacBook Pro 17 matte screen. It perfectly safe to use them in fact my friend works for Apple Store and they always use iKlear to clear all Apple products before they go home so they will shine in the morning!

  7. 0

    Grampa Doodie

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Mine came with a very nice cloth too. It almost has the feel of a chamois. I used to use Monster Cable Screen Clean, but now I use the wonderful cloth that came with my MBP. It does a great job!!

    Gramps.

  8. 0

    MellowmanB

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I talked with someone at wwww.klearscreen.com and they confirmed what a few of you wrote, that it is fine to use iKlear Apple Polish on the anti-glare or matte screens found on MacBook Pros. I'll try it on my screen. Thanks for all your help and advice. Later.

  9. 0

    atomic wedgie

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Use the black cloth that came with your MBP. Take it to a sink and thoroughly rinse it under the tap. You need to make sure any dirt, sand, or dust is washed off the cloth, or else you risk scratching something. Get it nice and soaking wet. Then squeeze out the excess water until it's just damp. Wipe gently in a straight line across the screen. Don't obsess too much--it'll only get dusty again later. Too much pressure or moisture is bad. There is no need to wipe with a dry cloth.

    If you're really worried about hard water spots, use distilled (demineralized) water.

    Do this about once every few weeks, depending on how much you use your Mac. Make sure you get the palm rests, trackpad, and case. The salts in the sweat from your hands, combined with the metal casing, and a bit of electricity (from the fact that when you're using the ungrounded 2-prong AC adapter, the casing conducts a little bit of electricity) can cause tiny black pockmarks to form. Trust me, my old 12" PowerBook G4 has a bunch of corrosion spots on the palm rests. It's ugly, makes the machine look dirty, and worst of all, it cannot be washed off--the aluminum has been etched away.

    Don't use any solvents; you shouldn't have to, anyway. Solvents are only good for stains, and you wouldn't do anything to stain the screen, would you? Like dropping pizza, spilling coffee, or smoking right on top of your machine? If you do, then a reconsideration of your priorities might be in order.

    I also recommend a silicone keyboard cover, like the iSkin. It prevents the paint from wearing off the keycaps, stops dirt and grime from getting under the keyboard, and blocks any spills (but again, you wouldn't let liquids get near your machine, would you?). Some people say that the cover gets yellow and dirty with age, but that's what it's there for--whatever happens to the cover doesn't happen to the keyboard.