Imported from the Apple Support Forums via the Wayback Machine 🔗
...bump.
Either way, I'll run the hardware test and then open it up to see if there is a loose connection or burned out fan...not sure how to test though
0
sam_:-)·
Imported from the Apple Support Forums via the Wayback Machine 🔗
take it to the apple store or send it in if you find out the fans aren't working. they'll fix it if your computer is less than a year old or if you got an applecare plan.
0
myresolve·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Have you used the iStat pro widget, its free on the website, it monitors the fan well.
0
mmockenn·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I installed smcFanControl, it shows 000 rpm and I cannot get fan to work
0
mmockenn·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Unfortunately, its past warranty.
I'm going to pop off the top and inspect the fan. try to reseat connection. If all else fails, i'll take to guru and get a quote to fix
0
tele_player·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I'd expect a dead fan on a Macbook to quickly lead to shutdowns from overheating.
0
Macaby·
Imported from the Apple Support Forums via the Wayback Machine 🔗
mmockenn wrote:
I installed smcFanControl, it shows 000 rpm and I cannot get fan to work
If I were you, I would get an second opinion and try iStat Pro. On my MacBook it shows my fan speed as I write this at 1800 rpm (it varies a few rpm on either side of 1800.) This utility also reports several temperature reading from 35-50 degrees.
As someone else wrote here, I would think your computer would either not run or shut down very quickly without the fan. At least that's been my experience on other computers that I've owned.
0
mmockenn·
Imported from the Apple Support Forums via the Wayback Machine 🔗
FIXED!
I took off the keyboard and checked the fan. Although only slightly dusty, something made it stick. A light push with the screwdriver and the fan was moving.
I cleaned the fan as best I could(without removing it) and reassembled.
smbFanControl now shows 1500+ RPM and cooler temps.
As side note, the only reason I notice the fan was out was because of EyeTV hybrid would tax the processors enough to overheat and shutdown. For most useage, the processor stays about 150 deg F and is OK.