Imported from the Apple Support Forums via the Wayback Machine 🔗
OK, this one should be easy, but I just want to know exactly how to do this. I am planning on getting a larger hard drive for my terrific MacBook. I have a perfectly functioning clone on a USB drive made with the terrific free Carbon Copy Cloner 3.0. I can definitely boot to that clone no problem. So, when I get the new hard drive, I assume I just take out my old drive, put the new drive in the MacBook, and then boot to the clone. I can then copy the clone to the new drive. Do I have to zero and format the new drive first using Disk Utility from the clone before copying?
Imported from the Apple Support Forums via the Wayback Machine 🔗
perfectly right
eventually you should format the new internal drive with journaled filesystem, if it is fat32 per default
i don't think you need to overwrite it with zeros
0
y_p_w·
Imported from the Apple Support Forums via the Wayback Machine 🔗
That's exactly how I did it - clone first,check clone for booting, install new drive, boot external clone, format/erase the new drive, clone the clone to the new drive. My only difference was that I used a WD Essential Home drive with a USB and FW interface - I picked FW.
It'll eat up CPU cycles and the fan will make a horrendous noise as your new drive is indexed by Spotlight. Be patient and it'll be over soon.
0
dndrich·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Thanks for the reply! When I got my USB drive, the instructions with Carbon Copy Cloner indicated that zeroing out was a good idea, even though time consuming, because evidently that will write out bad areas of the disc so that they are not used. So I figure I boot to the clone, format Macintosh journaled with zeros, and then clone to the new drive. I should think that would do it.
0
Glen Doggett·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Just curious, what size is the original internal and the external USB drive you were using? What is the size of the new internal drive?
0
dndrich·
Imported from the Apple Support Forums via the Wayback Machine 🔗
The current drive in the MacBook is an 80 GB with about 50 GB of data on it. The external drive is a Maxtor USB powered compact 120 GB drive. The replacement will probably be a 250 GB drive.
0
Glen Doggett·
Imported from the Apple Support Forums via the Wayback Machine 🔗
My internal 160GB is about 75% full, I run a nightly bootable backup clone to an OWC FW 320GB drive. When I get to 80-85% full I think I'll start looking for an new larger internal drive.
Well, at least you can still use your 120GB external backup for a while until your 50GB of data grows beyond that capacity...
Another handy option for copying data to a new drive when upgrading the internal is to temporarily use an adapter cable with the bare drive, (for those who don't currently have an external backup):