Benches MacBooks

3

Error: 4SNS/1/40000000:TGOD-86.000

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

I am a full time grad student and desperately need my computer to function properly.

I have a macbook pro that I purchased last year. Its had problems from about 4 months after the purchase until I took it in to be repaired in January 09. An Apple Tech replaced my entire HD (he said some blocks were failing in my HD).

Since then my 1 year "Apple Care" has run out and now my computer does not sleep properly (freezes, does not awake...etc) and it shows the following error when I run a test (no peripherals attached):

4SNS/1/40000000:TGOD-86.000

Some online forums said this has to do with failing temperature sensors and that

a "fix" might entail replacing the motherboard or the HD...what do you think?

WHAT DO YOU THINK?

Thank you very much!

Regards,

Juan

3 replies

Sign in or join Beachball Help to reply.

  1. 0

    iVmichael

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    4SNS means a Temperature Sensor has failed (or the lead has come off), best let an Apple technician take a look at it and give you a quote for repair ...

    User uploaded file

  2. 0

    S.U.

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Welcome to Apple Discussions!

    Your repair should come with its own warranty--90 days I think. If you are still in the 90 day period, then both the sensor and the new hard drive should be covered. Very likely the plug to the sensor got dislodged during the repair.

    If your warranty repair did not fix existing issues, then Apple has a policy of honoring the warranty until these issues are fixed. If they started with the hard drive replacement, then they should be covered by the 90 day warranty.

    You could try resetting the SMC to see if this will help with the sleep issue:

    http://support.apple.com/kb/HT1411?viewlocale=en_US

    Also try a PRAM reset:

    http://support.apple.com/kb/HT1379?viewlocale=en_US

    I have read many recommendations to wait until the chime has sounded for a third time.

    Freezing could also be due to software corruption. Make a good backup of your data, and try an Archive and Install to reinstall the OS.

    Also, check the free space on your hard drive to be sure you have 15%-20% free.

    There are a lot of steps that can be taken to determine what is going on, but the first one should be to go back to where you had the work done before your 90 day warranty is up.

    Good luck!

  3. 0

    john_powers

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I had that same error code, except without the 86.000 at the end, took it in and needed a logic board replacement. Like someone mentioned earlier though it would be best to take it in an have someone take a look at it. You could also try the steps listed for pram resets and stuff and see if that helps.

    Best of luck,

    John