Benches MacBooks

2

MBP speaker specifications

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

hi, I am seriously considering to get the MBpro when Leopard comes out. I am reading all specs and details but I couldn't find any real information about the built-in speakers.

Does anyone know what is the volume output and frequency response?

I know I can't expect much but I am just curious.

thx

a

2 replies

Sign in or join Beachball Help to reply.

  1. 0

    amilu

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    After all this time I finally found the answer on the developer.apple.com website.

    Even the apple store couldn't give me an aswer...

    "15-inch MacBook Pro Computers (June 2007)

    The 15-inch MacBook Pro computers introduced in June 2007, incorporating the Intel Core 2 Duo, include a built-in audio system providing the developer with a set of hardware resources that can be used to record or play audio.

    Input Ports

    The 15-inch MacBook Pro computer includes two audio input ports that can be used for recording: an internal mic and a combination line input and optical digital input port.

    Internal Microphone

    The internal microphone operates independently from all other audio input ports and is always available. The internal microphone supports recording at bit depths of 16, 20, or 24 bits per sample and at sample rates of 44.1 kHz, 48 kHz, or 96 kHz. Audio recorded from the microphone is presented as a stereo data stream with the same data appearing on both the left and right channels. The microphone gain can be adjusted from 0.0 dB to +22.5 dB.

    Line Input

    The line input operates independently from all other audio input ports and is always available. The line input supports recording at bit depths of 16, 20, or 24 bits per sample and at sample rates of 44.1 kHz, 48 kHz, or 96 kHz. Audio recorded from the line input is presented as a stereo data stream. The line input gain can be adjusted from 0.0 dB to +22.5 dB.

    During input of a 1 kHz, full-scale 1 VRMS sine wave (44.1 kHz input sample rate, 24-bit sample depth, 0.0 dB input gain, no weighting) the audio line input has the following nominal specifications:

    Jack type: 3.5 mm stereo

    Maximum input voltage: 1 VRMS (+2.22 dBu)

    Minimum voltage input for full scale output: 75 mVRMS (-20.28 dBu) at input gain = +22.5 dB

    Input impedance: > 20 kilohms

    Frequency response: 20 Hz to 20 kHz, +0.5 dB/-3 dB

    Signal-to-noise ratio (SNR): >90 dB

    Total harmonic distortion + noise (THD+N): <-80 dB (0.007%)

    Channel separation: > 80 dB

    Optical Digital Input

    Based on playback of a 1 kHz, -1 dBFS 24-bit sine wave playback, 24-bit 44.1 kHz output sample rate (unless otherwise specified below) the digital audio input and output have the following electrical characteristics (nominal specifications):

    FSI – input sample rates: 44.1 kHz, 48 kHz, or 96 kHz

    Bits per sample: 16-bit or 24-bit

    Signal-to-noise ratio (SNR): >130 dB

    Total harmonic distortion + noise (THD+N): >130 dB (0.0003%)

    Output Ports

    The 15-inch MacBook Pro computer includes three audio output ports that can be used to play audio: internal speakers, combination line and headphone output, and S/PDIF optical digital output.

    Internal Speakers

    The internal speakers are automatically selected for audio output if no external device is detected at either the line/headphone output port or the S/PDIF optical digital output port. The internal speakers support a stereo data stream at bit depths of 16, 20, or 24 bits per sample and at sample rates of 44.1 kHz, 48 kHz, or 96 kHz.

    Line/Headphone Output

    The line/headphone output is automatically selected for audio output if no external device is detected at the S/PDIF optical digital output port. The line/headphone output supports a stereo data stream at bit depths of 16, 20, or 24 bits per sample and at sample rates of 44.1 kHz, 48 kHz, or 96 kHz. The line/headphone output volume can be adjusted from 0.0 dB to -95.25 dB.

    During playback of a 1 kHz, full-scale sine wave (44.1 kHz output sample rate, 24-bit sample depth, 100 kilohm load, unless otherwise specified) the audio line output has the following nominal specifications:

    Jack type: 3.5 mm stereo

    Maximum output voltage: 2 VRMS (+8.24 dBu)

    Output impedance: <24 ohms

    Frequency response: 20 Hz to 20 kHz, +0.5 dB/-3 dB

    Signal-to-noise ratio (SNR): >90 dB

    Total harmonic distortion + noise (THD+N): <-80 dB (0.007%)

    Channel separation: >75 dB"

  2. 0

    clintbradford

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    They are better than most...but certainly not Bose quality.