Benches Mac desktops

4

Dreaded Target Disk Mode (ha)

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

Thanks for looking. Lots of time on the threads:

Would like:

MacMini (a desktop) Late 2014 with two Thunderbolt ports (not MiniDV), firmware version 26.1 (not sure that matters), running 10.13.5 to connect with TARGET DISK MODE via APPLE 0.5m Thunderbolt Cable to a 21" iMac (mid 2011), with one Thunderbolt port (not MiniDV), firmware version d.16.

Plugging a Lacie drive, Thunderbolt, into each port on the MacMini, the drive powers, loads, and I get "Device connected" on the Thunderbolt Bus System Report.

Plugging a Lacie drive, Thunderbolt, into the iMac Thunderbolt, the drive does not power, or load, and on the Thunderbolt bus status, I get "No device connected" (does not change to "Device connected").

When I was trying to connect the two computers via the Thunderbolt Cable, with an aluminum Apple Keyboard, with either CMD-F2, or CMD-fn-F2, I would not even get a computer screen flash or blink. The iMac did not even seem to acknowledge the keypunches. The Thunderbolt bus system report on neither machine would show any device connected, when connected via the Thunderbolt Cable.

So I guess I have a bad Thunderbolt port on the iMac? A firmware issue?

How do I go about this Thunderbolt outage? Below is the System Report from the iMac.

Many thanks,

2LT

4 replies

Sign in or join Beachball Help to reply.

  1. 0

    SeaPapp

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    First you're referencing Target Display mode, Target DISK mode is something entirely different. Use your iMac as a display with Target Display Mode - Apple Support

    Make sure that the keyboard you're using is connected to the iMac and not the mini.

    Have you tried to reset the SMC How to reset the System Management Controller (SMC) on your Mac - Apple Support and

    NVRAM Reset NVRAM or PRAM on your Mac - Apple Support onthe iMac?

  2. 0

    2littletime

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    In the fugue that happens, I did say Target Disk mode; sorry, definitely meant Target Display Mode.

    As above:

    "So I guess I have a bad Thunderbolt port on the iMac? A firmware issue?

    How do I go about this Thunderbolt outage? Below is the System Report from the iMac."

    Does anyone have any advice on the seemingly non-behaving iMac Thunderbolt port (it would not show a sample device, the LaCie drive, as connected)? Is there a FIRMWARE problem that could be fixed with a download (hopeful)? Or authorized service for a new motherboard or something?

  3. 0

    SeaPapp

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Did you follow the reset links I posted above?

  4. 0

    2littletime

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hi, I have not yet. Do you think those may improve the Thunderbolt performance?