Benches Mac desktops

9

Late 2012 27 inch iMac dead after Mojave …

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

I had thought that my iMac was supported by Mojave.

However, after being prompted by the system to do an update, I have an unusable system. It starts booting (not including the chimes) and then the screen briefly goes blank before showing a grey screen with the message "Your computer restarted because of an error. Press a key or wait a few seconds to continue starting up." This then goes through a loop endlessly.

I've tried a complete power-off, including unplugging at the wall.

I've tried restarting holding Command-R and subsequently run Disk Doctor.

So I am stuck. Helpful advice would be much appreciated.

9 replies

Sign in or join Beachball Help to reply.

  1. 0

    Kappy

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    You have a corrupted system. I recommend trying the following:

    Reinstall El Capitan or Later Without Erasing Drive

           Please be sure you back up.

    Restart the computer. Immediately after the chime hold down the Command and R keys until the Utility Menu appears.

    Select Disk Utility and click on the Continue button.

    Select the indented (usually, Macintosh HD) volume entry from the side list.

    Click on the First Aid icon in the toolbar. Wait until the Done button activates, then click on it.

    Quit Disk Utility and return to the Utility Menu.

    Select Reinstall OS X and click on the Continue button.

    Also, see this User Tip: Basic Steps for Upgrading OS X.

  2. 0

    Michael Haffey

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Thank you.

    When I boot using Cmd-R, having run First Aid when I go to reinstall MacOS, it only shows MacOS Mojave. I don't seem to have much option here but before I click on the "Continue" button, I'd like to make sure I am not going to make things worse.

    As far as I can tell, there is no option to top back to the previous OS.

  3. 0

    Kappy

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    You have a corrupted system. I recommend trying the following:

    Reinstall El Capitan or Later Without Erasing Drive

           Please be sure you back up.

    Restart the computer. Immediately after the chime hold down the Command and R keys until the Utility Menu appears.

    Select Disk Utility and click on the Continue button.

    Select the indented (usually, Macintosh HD) volume entry from the side list.

    Click on the First Aid icon in the toolbar. Wait until the Done button activates, then click on it.

    Quit Disk Utility and return to the Utility Menu.

    Select Reinstall OS X and click on the Continue button.

    Also, see this User Tip: Basic Steps for Upgrading OS X.

  4. 0

    Michael Haffey

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Thank you.

    When I boot using Cmd-R, having run First Aid when I go to reinstall MacOS, it only shows MacOS Mojave. I don't seem to have much option here but before I click on the "Continue" button, I'd like to make sure I am not going to make things worse.

    As far as I can tell, there is no option to top back to the previous OS.

  5. 0

    Kappy

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Disk Utility should show at least two entries for the startup drive.

    Note that on my drive there are three volumes (indented entries). The physical drive entry is labeled, Fusion Drive. It is the out-dented entry. You would select the indented entry for the volume.

  6. 0

    Kappy

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    There has never been an option to return to a previous version of macOS. In order to downgrade: macOS Reversion- How to Downgrade from Mojave.

  7. 0

    Michael Haffey

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Thanks, Kappy. I thought I had replied two days ago, but apparently not!

    I did First Aid on my disk and then tried to re-install MacOS. However, it still fails with a server error problem. I think I probably need to fo to the local Apple Genius Bar.

    Before that, though, I'd like to make a belated attempt to connect my 2018 MacBook Pro to the iMac and see what I can pull off the disk (if this is possible). I expect I would need a special cable (my MacBook has USB-C ports, the iMac has Thunderbolt and Ethernet)

    Does this sound feasible? is there a recommended way of doing this?

  8. 0

    Kappy

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    You must be able to boot the iMac. If you can connect the two it would be via Thunderbolt so you would need an adapter from the iMac's TB2 port to the MBP's TB3 port. You would have to boot the iMac into Target Disk Mode. Otherwise, the two computers can be connected directly by Ethernet or simply on the same local network. The iMac would need to enable File Sharing so the MBP can access and transfer files.

  9. 0

    Michael Haffey

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Just to close the loop on this, as the problem is solved.

    • I spoke to the Apple help line (contacted via the Apple Support app on my iPad)
    • After much discussion, the advice was to install High Sierra using a bootable USB key attached to my iMac. More info here https://support.apple.com/en-gb/HT201372 and here (for a simpler way to achieve this) https://diskmakerx.com/whats-this/ (nb scroll down this page to get to earlier versions of MacOS)

    Many thanks, Kappy, for your support. Although you didn't solve the problem, several suggestions were extremely helpful and I have marked them so.