Benches Mac desktops

15

My iMac won't shut down

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

I bought a new imac yesterday - updated to leopard with the drop in and all fine.

Then it updated all the software incl. 10.5.1 update and shut down (installing the software.

Today I switch it on and it won't shut down! - icons isapear and I get the spinning wheel and it sits there for ages until I switch off by holdng the power button.

Any one else experience this?

15 replies

Sign in or join Beachball Help to reply.

  1. 0

    Dave Marsh

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Try to be a bit more specific and I'll see if I can help.

    After installing the 10.5.1 update, your Mac would have rebooted, presented a gray screen with the Apple logo, and then a few seconds later a spinning gear. That spinning gear may take up to 80 spins or so the first time the Mac is run with the updated software as it updates its caches, and the like.

    I'm assuming this is a clean install of Leopard, or a simple upgrade of the standard 10.4.10 installation that probably came on your iMac, and that you didn't migrate any data from another Mac. So, there shouldn't be any damaged or conflicting software attempting to run on your new Mac.

    Once MacOS X is initially installed, it will begin indexing the contents of your hard drive, so that you can use Spotlight to immediately find anything later. After that initial indexing is completed (and it can take hours, depending on how much data is on your hard drive), the system internally keeps track of new files created, and changes to existing files, and updates the index on-the-fly in the background.

    You can see what's hogging the central processor by running Activity Monitor (located in Applications/Utilities). This utility is extremely useful in diagnosing what your Mac is doing at any point in time, so I keep it running in my Dock (at the bottom of the screen) all the time, just so I can check occasionally to see what's going on.

    So, to get back to your question, the spinning beach ball will only be visible in applications that are busy (or crashed). Does the spinning beach ball only appear in the Finder (the application that controls your Desktop and named at the top left corner of the screen when it's active)? If the Finder is crashed, your Mac's software will not be accessible, since that's the app your Mac uses to control the user interface.

    In that case, reboot your Mac from the Leopard drop-in DVD you used to upgrade your Mac. You can do that by inserting the DVD in the slot on the right side of the iMac, pressing the power button, then when you hear the startup chime immediately pressing the DVD into the drive slot, all while holding down the "C" key. This will force the Mac to startup from the DVD (or CD). Once it finishes loading and you're presented with the installation window, go to the top of the screen and select Disk Utility from the menu there. Once that is running, click on the name of your Mac's hard drive in the left box of the Disk Utility window, then on the Repair Disk Permissions button at the bottom of the window. When that finishes, press the Repair Disk button at the bottom right of the window, as well, and let it check the disk for any file structure problems and fix them (each of these tasks may take up to 10 minutes, so be patient). If Disk Utility finds anything amiss, rerun that function until all is OK. When those both finish successfully, quit Disk Utility, select your internal hard drive as the Startup Disk, and reboot.

    MacOS X requires the permissions of all of the several hundred thousand files to be set correctly, or the applications that use them may not work either as expected, or at all. Security control in the Mac environment goes very deep, and is based on the same operating system used on most of the commercial servers running throughout the world.

    Your upgrade should have proceeded flawlessly, so without knowing more about your system, I'm not able to offer more at the moment. As I said above, your should ONLY see the beach ball when the application you're accessing is either busy or crashed. No application should present the beach ball for more than a few seconds. If you set your Mac to automatically startup the Activity Monitor when you login to your account, and configure that so that it shows how busy your CPUs are (View menu/Dock Icon/Show CPU History), you'll know when the problem is your System, or some user application that's misbehaving.

    Good luck.

  2. 0

    IanDB

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Thanks for info so far.

    It was the "gear" spining, not the beach ball adn I left it for half an hour or so before press and hold on the power button (I rebooted and tried this a few times.).

    I did have my iDisk sync on auto and idisk copy on my local drive set up - I turned both of these off and don't have the problem anymore............. this seems odd to me.

    I did have a copy of all my data on the ext drive which is copied back on the new mac and all seems fine now.

    Strange about the idisk issue though...

  3. 0

    Dave Marsh

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    You needn't wait half an hour to press the power button after watching the spinning gear. If it doesn't shut down in 100 spins (a couple of minutes), it's not going to.

    When you first set up your .Mac account and turn on automatic syncing, it may take an hour or more to build a copy of your iDisk, depending on how much stuff you have stored online. Remember, it's downloading from .Mac your saved data, and is dependent on your Internet connection speed. While any window will show the spinning sync icon next to the iDisk volume as it proceeds, it shouldn't impact your user experience at all. There should certainly never be a spinning beach ball while it's syncing.

  4. 0

    jrtripp

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I'm having the exact same problem with shutting down. If I follow your directions will I lose any files that I have stored on the computer?

    Thanks

  5. 0

    myhighway

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hi jrtripp!

    Keep in mind that ... "the 'gear' spining, not the beach ball" - is referred to as a progress indicator. Sometimes it can proceed that way (without turning into the beach ball) even when the OS has stalled. However, I have many times walked away after ten minutes of the spinning gear, and come back to see my Mac had resolved itself and was ready to go, so it turned out that it was making progress after all.

    When I ever have seen the beach ball, which is actually also a progress indicator, it far more often than not has represented a stall or lack of progress, and never resolves. That's when I choose to force quit the application. Force quits will lose all open, unsaved work, but not any file already saved.

    http://docs.info.apple.com/article.html?path=Mac/10.5/en/8225.html

    Message was edited by: myhighway

    Message was edited by: myhighway

  6. 0

    jrtripp

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Let me add some more information. I followed your instructions and ran the disk utility. No help. When I Shut Down the Dock disappears and I get no Beach Ball or Gear. All I see is the wall paper and it never shuts down. Is there another issue that needs to be looked at?

    Jim

  7. 0

    myhighway

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Jim, I don't know how long you waited, but it might take several minutes to shut down after adding the software updates.

    That doesn't indicate any problem, although I don't know if all of these are taking that long for other new owners. Mine took at least that long last week after I took it out of the box and updated all the software.

    It wasn't the first time I'd seen that with a Mac after an update, so it didn't bother me. Several times my Macs have gone through a double restart cycle after doing updates (and those were supposed to happen, as it did so for everyone else).

    I actually didn't time this one, but after a minute of waiting for it to restart while seeing only the desktop (nothing else - the menu bar and icons disappeared), I just went to the kitchen while it did it's thing. Everything turned out all right. If you shut down in the middle of all that, I know that it WILL take even longer to start up the next time.

  8. 0

    jrtripp

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Ok. Thanks for the help. It took about 15 minutes to shut down. Since I'm a little unfamiliar with Macs I got a little worried. I'll keep an I on it and add updates if need be.

    Jim

  9. 0

    myhighway

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Jim, if you aren't using Boot Camp or another OS, look at Disk Utility. If you pulled the electric plug at any time, it would be a good idea to use the version of Disk Utility located on the same install disc that matches your current version of OS X (only use Tiger disc for Tiger, only use Leopard disc for Leopard) to "Verify" your internal hard drive disk.

    If any OS corruption occurred due to the electricity interruption, "Verify" will show that, and you can then "Repair" the disk directory, hopefully resulting in putting things back in their proper positions. This would speedup your future startups.

    Frankly, I just skip the verify part, and always run the repair after anything unusual happens to a Mac, and I've never had an issue. But I notice that Mac Help and Disk Utility Help have in more recent times suggested using the Verify button first - perhaps some users have had problems crop up unexpectedly? perhaps they have had problems when another OS is installed on the hard drive disk, or if there are multiple partitions? Those are things I've never dealt with, so can't ignore them. Best of luck getting her back up to speed:)

    Message was edited by: myhighway

  10. 0

    Dave Marsh

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    As I noted earlier, I have also been experiencing a Restart/Shut Down reliability issue with my new iMac and Leopard 10.5.1. This evening an Apple rep I know pointed me to a work-around in Apple Discussions:

    http://discussions.apple.com/thread.jspa?messageID=5957261&#5957261

    This thread notes the discovery by one user that iDisk automatic syncing is not working reliably, and is preventing consistent restarting/shutting down of your Mac. Although, syncing has been working reliably for me both for .Mac stuff, and the iDisk itself, if you do a Get Info on your iDisk it reports, at least for me, that its capacity is 1TB, with 466GB available. I have only the standard 10GB .Mac account, and only 5GB of that is allocated to my iDisk, so something is clearly amiss with the .Mac iDisk setup, as being reported from the .Mac server. If you check your Console logs, you may also see this recurring error message, which is reporting a syncing error, although my syncs have, as I've said, been working correctly:

    11/25/07 9:11 PM FileSyncAgent[192] MKCOL /.FileSync (FAILED), httpStatusCode:405, errorType:100, transactionState:5, txnId:3846B904-9ABB-40E5-9928-B9233FAC05D2, auto-retries=0, manual-retries=0

    To summarize, if you turn off automatic iDisk syncing in your System Preferences/.Mac/iDisk preference pane, you'll have no problems restarting/shutting down. You may also need to do the power management reset (turn off Mac, unplug all devices and power for 15 seconds, reconnect, and start up) and the parameter RAM reset (reboot while holding down the cmd-opt-P-R keys). You can do this in one restart cycle, if you like. After that, restarts/shutting down has worked perfectly for me.

    Of course, I actually USE my iDisk, and will be leaving it on. But, at least I know now how to work around the restart/shut down issue.

    I hope Apple adds this fix to their 10.5.2 update next month. 😉

  11. 0

    rag_master

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Wow, I'm having the exact problem, and since this is my first mac it has me really worried. It sometimes takes so long to shut down that i just turn it off from the powerpoint which isn't really ideal.

    I've also realised how hot the iMac can get which is another worry, but i fixed up that problem with the fan control and currently its at 39 degrees.

  12. 0

    myhighway

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hi rag_master!

    After installing a software update, your iMac will not benefit at all from shutting down and sitting. On the other hand, it will benefit immensely by running a continuous 24 hours, either by restarting after the update has installed, or upon next startup. After that, the shutdowns will not linger as they are doing now. Display sleep is ok, but full sleep is no help to the system either.

    Definitely not a good idea to shut down other than from the Apple menu. I hope that after you do so you're using Disk Utility to verify the directory of your HDD. Never know when an issue will crop up from those hard shutdowns.

  13. 0

    elenchos

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I had this issue on my iMac beginning from 10.4.8, so if anybody still has issues this may be of interest. after trying all the remedys i could find, i discovered one about conflicting external USB devices that were preventing shutdown, so far i've heard of someones Belkin UPS backup causing it and my Lexmark printer was my culprit, So i just unplugged it and no longer use it. hope this helps.

    (sidenote: my APC UPS backup does not present a problem)

  14. 0

    Dave Marsh

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Old USB 1.1 devices will definitely prevent some Macs from waking/shutting down reliably, so it's best to replace them with new, powered, USB 2.0 devices.

    Also, I agree, leaving your Mac on will permit it to rotate its logs at night, update its caches, and perform routine UNIX background maintenance (although this activity no longer appears to show up in logs as it used to). Remember, MacOS X is just a pretty face on a very robust UNIX server platform, tailored for individual user performance. You only need to shut it down/restart it for system-related updates, or when you choose to for some other reason.

  15. 0

    DANIEL STILLSON

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I am having the same problem my 24"Imac won't shot down can any one help me