Problems connecting Sony camcorder to my new iMac
apple Verified ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hi - Can any one help? I recently moved from a very old pc to a shiny new iMac. Now (sadly just outside the 90 day support period!) I find I cannot connect my Sony Handycam camcorder to the iMac - it is just not seen. I took the camcorder and the firewire cable down to my local Apple retailer today and they were able to plug the camcorder into an iMac in the shop using my firewire cable and the Sony device immediately appeared in the Macintosh hard drive there. This is what I would expect to see on my machine, but nothing at all happens on mine. I am now suspecting that there is something wrong with the firewire port on the machine... Don't know what else to try as I have no other firewire devices - so any suggestions would be most welcome.
9 replies
Sign in or join Beachball Help to reply.
- 0
Alley_Cat ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Try asking in the iMovie forum - they will need to knwo the model number of the camera - presumably you have iLife 08 and are seeing nothing in iMovie - sometimes you need to configure the Sony's menus for things to show up, but odd that it worked at the store.
If connecting via Firewire it would not necessarily appear amongst your hard drives.
AC
- 0
J D McIninch ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
This usually occurs for one of two reasons: the camera isn't set to the proper mode, or the cable has an issue. It could be that there's another issue, but those are the most common.
Generally speaking, the camera needs to be switched from the camera/recoding mode to it's VCR or VTR mode. If the camera is a hard-disk model (as opposed to the usual DV), then it's possible that the camera will appear as an external hard disk on your computer. If so, you need to make sure that the Finder preferences for the Sidebar have "External Harddisks" checked, and for General the "Show External Hard Disks on the Desktop" is checked.
The other possibility is one of the cable. I don't know why, but especially some of the firewire cables I've gotten lately have had issues. Even short ones. Try a couple of different ones, if you have a few, and see if you have the same problem.
A good idea to is to start the System Profiler utility (/Applications/Utilities) and click on "FireWire" in the list on the left. You should see the FireWire controller listed, but also the FireWire devices that are plugged into it (if anything is detected -- if not, time to start suspecting the cable, hardware, or combination of the two).
- 0
Shylock1966 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
as above when i connect my Sony it dont appear on the desktop. In Imovie connect camera and set in to play mode it should then open the input box and you should see the footage. have you tried this ?
- 0
ajh226 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Thanks - have camera in VCR mode (it is a DV mini-tape one). It does not show up as an external hard disk. Interestingly it did do this in the apple shop when connected to their iMac, which did not have iMovie on it...
Using the system profiler utility, when I click on Firewire, I get 'Warning: Unable to list Firewire devices' in red writing! I think this is part good news, because it must be at least recognising that a device is there...
- 0
Alley_Cat ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Is is an SD or HD model. I have a Sony HC3 HD mini Dv camera and under certain situations it's a bugger to get it recognised.
AC
- 0
J D McIninch ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
A DV camcorder should not appear as a disk. That should only happen for hard-disk models and for accessing a memory card in a camera (your camera might have both).
The red warning when trying to list the firewire devices does indeed mean that a device is detected, but it also means that the connection is bad. The possibilities are:
1. a bad cable connection (make sure the cable's firmly plugged in to the computer and camera; try another cable)
2. low voltage (if the camera is not plugged into AC power, do so; also try another cable)
3. a bad firewire port (camera or computer; plug a different firewire device into the computer and the camera into a different computer and see if they show up; contact vendor for service)
For a DV camera, nothing happens when you connect it -- there's no feedback whatsoever. System Profiler should show the device after a few seconds, but that's about it. The principle evidence that the camera is recognized is that an application that should download from the camera is able to find it when asked to do so.
There's one thing to be mindful of a couple of quirks of Apple's FireWire support: if something is accessing a FireWire device and something goes wrong with it, you cannot reattach to the device without closing all the applications that are accessing it. For example, Final Cut may have an error related to a dropped frame on the camera, and reading from the camera will become impossible until you've closed Final Cut and reopened it. The other quirk is that the Mac FireWire support generally won't recognize video (DV) devices that are daisy-chained off of another device (like a harddisk). You have to plug in directly to the Mac.
- 0
ajh226 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Thanks to all who posted suggestions. I have still had no success - suspect the cable is faulty and will have to make the time to go out and buy another one...
- 0
DiepS ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I have been experiencing a similar problem with my Canon DV camcorder (optura 20). I bought a new cable, and continued to have the same issue. After about 5-10 attempts of plugging/unplugging and rebooting the system (which would be expected running a different OS on a different system), the camera appears and imports the movie with no obvious issues.
I tried connecting my old CD-RW fire wire drive into the port and encountered the same red error line above. If I remove either cable and refresh system profiler, it immediately identifies the firewire ports though obviously nothing is connected.
I also tried daisy-chaining the camcorder through the external CD drive, and it appeared the first time I tried it, so I unplugged it and tried to connect directly again, but then I had to go through the whole riggermarole of unplugging/plugging in again before I could import into iMovie. - 0
NicoMAC44 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hi, I had a similar problem and it had to do something with the new imovie-the new imovie doesn't support some sony formats-apple was providing the previous version of imovie a while back and downloading that solved all my problems-I could then import the video into imovie 08. Hope this helps-there is a post on it somewhere in the imovie forum