Benches Mac desktops

5

Brand new Mac Mini (2018) reboot fail (sa…

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

I have a brand new Mac mini. This following happens 100% of the time:

1) Shutdown

2) Power up by pressing power button

3) Powers up to blank screen (monitor says no signal), white light is illuminated, router sees computer as online no response with keyboard or mouse input)

4) Hardware reboot by holding down power button for 10s

5) Powers up to Password Recovery Assistant asking if I am having problems with my password

6) "Restart" from Apple menu

7) Powers up to "As software update is required to use this startup disk" prompt

8) "Restart" from Apple menu

9) Powers up to normal MacOS environment, everything is fine.

Yes, I have tried resetting my password and I have clicked "Update" to apply whatever the software update is. Neither has any effect, I get stuck in the same loop every time I Shut Down. By the way, if I reboot there is no problem at all, works perfectly.

Apple support was of no help.

I have done a clean wipe/install from the Internet Recovery menu.

Any ideas? I am at head-bashing-into-desk stage.

5 replies

Sign in or join Beachball Help to reply.

  1. 0

    ILLCOMM

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Well not 5 minutes after posting this I figured out what's going on. I still have a problem but it's not a weird boot problem.

    I swapped the USB-C to DisplayPort cable to HDMI and viola, I get a normal boot experience (I guess the password reset boot should have been a hint that the computer was getting to the login screen but the display simply wasn't showing anything).

    Therefore, it appears that upon cold boot the Mac mini will not detect the display (connected over USB-C to DisplayPort) but after the password reset boot and software upgrade boot it suddenly will. I assume this is some sort of display driver issue and booting to those recovery modes loads some sort of drivers that then work when I kick over to normal mode. Fat chance I solve that. So, I guess it's 30Hz HDMI for now. Sad.

    (Monitor is LG 27UD68)

  2. 0

    Magpie915

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Your problem is that the mac mini 2018 is not waking up the monitor. Others have the same problem, as do I. A reboot is not likely to work and you will wind up as you have. My work around (and this will sound really silly) is to click a key or two, move mouse, lightly press the power button on mac mini, move a key and a mouse, turn display off, then on. Works 95% of the time. Bizarre, yes.

  3. 0

    Magpie915

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    HDMI will not work sometimes either. I have used 5 different high speed cables to the various HDMI inputs on my display. Mac mini fails to wake up monitor. The only monitor that works flawlessly is my old Apple Cinema.

  4. 0

    lllaass

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Maybe this will help. It discusses a firmware update for an LG monitor

    2018 Mac Mini monitor wake from sleep and… - Apple Community

  5. 0

    hcsitas

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Why not 60 Hz? HDMI 2.0 can handle it.