Benches Mac desktops

9

Mac Mini (mid 2010) RAM Upgrade Problems

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

I recently acquired an old Mac Mini, and bought two CRUCIAL 4gb DDR3 - 1333 (PC3 10600) modules.

When I try and install the two new modules into the Mac, I get the three bleeps that indicates a RAM issue. I've tried the following:

  1. New RAM in slot 1 (bottom slot) only - Mac turns on fine
  2. New RAM in slot 1 and old RAM (1GB) in slot 2 - Mac turns on fine
  3. New RAM in slot 1 and slot 2 - Mac beeps and doesn't turn on

I have tried both of the new RAM modules in slot 1 and both work, but as soon as I put them in at the same time, it bleeps.

It surely can't be the memory slot, because the 1GB works fine?

Any suggestions?

9 replies

Sign in or join Beachball Help to reply.

  1. 0

    K Shaffer

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Note the specs for memory chips in that model, given the identifier you supplied:

    Maximum Memory 16 GB (Actual) 8 GB (Apple)

    Memory Slots 2 - 204-pin PC3-8500 (1066 MHz) DDR3 SO-DIMM

    This is Mac mini (Mid 2010) according to MacTracker.ca database & everymac site:

    Introduced June 2010

    Discontinued July 2011

    Model Identifier Macmini4,1

    Model Number A1347

    EMC 2364

    Order Number MC270LL/A

    With correct & expected upgrade or replacement parts, the unit may function properly.

    {..macsales/owc site & crucial sites offer several RAM chips that fit; incorrect or otherwise..}

  2. 0

    K Shaffer

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    You can check against the OWC or crucial web site for exact match; however

    results will vary if you misidentify the product specs or build model year, etc.

    You cite this:

    DDR3 - 1333 (PC3 10600)

    but MacTracker database says:

    2- 204-pin PC3-8500 (1066 MHz)

    These are not interchangeable, however some rare instances of a slower spec

    RAM chip working in higher demand environment have happened. 1- Original

    memory stick that seems to work correctly may be the right spec for your Mac.

    Check the model info (by serial number, but don't post that info here) to be sure:

    Mac Serial Number Info - Lookup Your Apple Serial Number:

    https://www.powerbookmedic.com/identify-mac-serial.php

    Expect that if you order the incorrect part number, the device probably won't work

    or could only within limited conditional parameters. Try the correct 'matching' RAM.

    Good luck & happy computing! 😻

  3. 0

    K Shaffer

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Note the specs for memory chips in that model, given the identifier you supplied:

    Maximum Memory 16 GB (Actual) 8 GB (Apple)

    Memory Slots 2 - 204-pin PC3-8500 (1066 MHz) DDR3 SO-DIMM

    This is Mac mini (Mid 2010) according to MacTracker.ca database & everymac site:

    Introduced June 2010

    Discontinued July 2011

    Model Identifier Macmini4,1

    Model Number A1347

    EMC 2364

    Order Number MC270LL/A

    With correct & expected upgrade or replacement parts, the unit may function properly.

    {..macsales/owc site & crucial sites offer several RAM chips that fit; incorrect or otherwise..}

  4. 0

    Dr4ke

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hey!

    I checked the specs and the RAM looks perfectly compatible? Are you saying you read something different, or just advising me to double check?

  5. 0

    K Shaffer

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    You can check against the OWC or crucial web site for exact match; however

    results will vary if you misidentify the product specs or build model year, etc.

    You cite this:

    DDR3 - 1333 (PC3 10600)

    but MacTracker database says:

    2- 204-pin PC3-8500 (1066 MHz)

    These are not interchangeable, however some rare instances of a slower spec

    RAM chip working in higher demand environment have happened. 1- Original

    memory stick that seems to work correctly may be the right spec for your Mac.

    Check the model info (by serial number, but don't post that info here) to be sure:

    Mac Serial Number Info - Lookup Your Apple Serial Number:

    https://www.powerbookmedic.com/identify-mac-serial.php

    Expect that if you order the incorrect part number, the device probably won't work

    or could only within limited conditional parameters. Try the correct 'matching' RAM.

    Good luck & happy computing! 😻

  6. 0

    Dr4ke

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I used the official Apple site (https://support.apple.com/en-us/HT205041#three) that points to the RAM specification here: https://support.apple.com/en-gb/HT202283

    Which states a maximum of 8GB RAM with the spec PC3-10600 DDR3 204-pin SO-DIMMs 1333 MHz.

    I'm not sure where you got the 1066 Mhz?

  7. 0

    stedman1

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    That RAM spec is for a Mid 2011 Mini, while you state you have a Mid 2010. You have purchased incorrect RAM.

    16 GB (Actual) 8 GB (Apple)Memory

    Slots2 - 204-pin PC3-8500 (1066 MHz).

  8. 0

    Dr4ke

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Well - that's a bit ****. I didn't even look at the title! I just assumed, seeing as I'd clicked the 2010 hyperlink, that it was relevant to the 2010 Mac Mini!

    But you're absolutely right MacTracker has them down as a 1066MHz speed. Maybe Apple should update their support page to include the 2010 model.

    Memory Slots: 2 - 204-pin PC3-8500 (1066 MHz) DDR3 SO-DIMM

    Thanks for your help.

  9. 0

    stedman1

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    You’re welcome.