Benches Mac desktops

7

iMac will not boot, hard drive file probl…

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

The iMac will not boot. The Apple displays on the screen, the cursor spins for awhile, and then it loops into a reboot effort.

Last night, I was doing a lot of custom file sharing settings using the include enclosed folders option at the bottom of the Get Info window.

Question 1: Could that file sharing process have messed things up?

In an effort to get things going........ A few weeks back, I used Disk Utility to create a 2nd partition, with the intent of installing Ubuntu Linux there. I never attempted the install, as far as I can remember, while playing with the Ubuntu Live CD. So, I thought I would install 10.5.6 from the CD in the 2nd partition. But I get an error message that says "The installer could not create the folder "/Volumes/Ubuntu 9.10/BaseSystem.pkg.161nDNDdQ.""

Question 2: I also shared that partition, could that have caused the OS install failure?

Question 3: If I understand the book correctly, I can try to install the OS from the CD on the 1st partition, and not lose my data, correct? Unfortunately, I don't have any backup for the data, as I don't own any drives large enough yet to accommodate the data on the drive.

Question 4: Anyone have any other thoughts as to what ent wrong?

7 replies

Sign in or join Beachball Help to reply.

  1. 0

    Grant Bennet-Alder

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    "The installer could not create the folder "/Volumes/Ubuntu 9.10/BaseSystem.pkg.161nDNDdQ.""

    Looks like your drive or a partition is named 'Ubuntu 9.10', and it could not create a temp file needed to install the Base System. You probably locked up some sub-directory needed by Installer to store temp files.

    Boot from the Mac OS X Install CD, but do not install. Choose Disk Utility from the Utilities menu that appears after you specify what language (and nothing more). Select your hard drive and click Repair. When that completes without error, click Repair Permissions. When that completes, quit Disk Utility and choose Startup Disk, use it to specify your Hard Drive, and Restart.

    When you boot up from the Hard drive, select Disk Utility and Repair Permissions again. It will do a more thorough job based on what is installed on your hard drive.

  2. 0

    snowshed

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hi, Grant,

    Partition #2 is Ubuntu 9.10. And we can probably blame Leopard for the errors, as I did little manual sharing

    I've run the permissions repairing 3 or 4 times with no success. But there seems to be a few permissions that never get repaired. Just for a lark I tried again to install the OS in the 2nd partition but with no luck.

    What should I try next?

  3. 0

    Grant Bennet-Alder

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    If this is a G3 imac of 333 MHz or slower, there is this issue:

    TA22193- Macintosh starts up to Open Firmware or gray screen after upgrading hard drive

  4. 0

    snowshed

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    24" iMac, 1 year old

  5. 0

    snowshed

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hi, Grant.

    Sometimes, it just pays to think on a problem. I awoke thinking, if it will boot the OS X install CD, it ought to boot my Ubuntu Live CD. And then, maybe I can change permissions on the first partition. As soon as I thought that, it occurred to me, if the problems are with the permissions, what if I used the OS X disk, and erased (formatted) the Ubuntu partition. That should set all the permissions on that partition back to default. Would OS X install then to the Ubuntu partition?

    You better believe it did!! I'm typing this from the Mac after updating my 10.5.6 to 10.5.8 in the 2nd partition, and I'm booting from the 2nd partition.

    I then did as you suggested, and from the Mac, I repaired the permissions to the first partition. But, the result was the same, there are a few permissions that do not match, and Disk Utility cannot, does not, or will not correct them.

    I'm currently downloading the 10.5.8 combo update .dmg file. My thought is to burn that to a disk, and then install it over the version in partition 1. And trust that the current installation on partition 1 does not have any cross linked files that will destroy some data.

    I do have some old ATA IDE drives I can hook externally to the Mac, and copy some of the information I have from the Mac to those drives before doing the 10.5.8 install.

    Can you think of a better solution?

  6. 0

    Grant Bennet-Alder

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    If you are comfortable with UNIX, I find the permissions setting tools in Terminal give more reliable results that those in the Mac OS X GUI. The problem I have is that I don't know what to set things to. But if you want to blast a whole mess of stuff to a particular setting, chmod to your heart's content.

  7. 0

    snowshed

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I've been closer to getting a ride to the moon than I am to having worked with Unix. The only Unix exposure I've had is the one line uttered in Jurassic Park!! LOL

    And I wouldn't have any idea what to set things to either.

    So, I'd rather just reinstall 10.5.8 on the first partition, and then copy the settings back from partition 2, as I did with the installation there today. I'll copy what I can of the data from partition 1 to some external drives first.