Benches Mac desktops

14

AJA conversion in FCP

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

I need to digitize beta tapes. I have a Sony Betacam sp PVW 2800 and I am connecting it to the AJA io hd through YPbPr cables and then to my imac i7 (still waiting for mac pro to arrive). When I capture in FCP the video looks pixelated. Is this just due to the fact that beta tapes are old, or should I have the beta deck hooked up via different cables (i.e. SDI)? Also, what is the best preset in "Easy Settings" just to digitize to raw files?

14 replies

Sign in or join Beachball Help to reply.

  1. 0

    Shane Ross

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    What Easy Setup are you using? Not upconverting it to HD, right? Did you choose one of the ProRes SD settings? If your beta decks have SDI out (they won't, only digibeta playback/record decks will) ten you can use that. But Component is fine. I did this for a two hour special I worked on. ALL beta tapes. But then I upconverted them too, so...

    Since you have the IO HD, do you have it connected to a monitor? Production monitor, not computer. Never judge what you see on computer monitor.

    Also, what is the best preset in "Easy Settings" just to digitize to raw files?

    Define "RAW." Red Raw is the red codec. Photo RAW is whatever photo RAW is. Beta isn't "raw," it is a tape format. It is an 8-bit analog tape format. With the IO HD you are limited to ProRes capture only, which is actually fine. ProRes 422 for 720x486 is fine.

    Shane

    User uploaded file

  2. 0

    Ian Hunter*

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    beta SP, is uncompressed 8-bit setting
    also look that the aja control panel is all set for the correct input settings and not trying to cross or up convert on the fly

  3. 0

    Brian Conner

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Actually, Shane is correct - the best SD preset when using the IoHD is one of the ProRes 422 setups. So, choosing uncompressed 8-bit means that the data is being converted from ProRes 422 to uncompressed after it gets to the CPU in your Mac.

    Why take that hit when ProRes 422 is nearly indistinguishable from uncompressed?

  4. 0

    Ian Hunter*

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    sorry, yes i forgot you were using an ioHD not a KonaLH
    prores then

  5. 0

    mybarnacles

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    We used the uncompressed 10-bit setting in Easy setups. And no we are not upconverting them at this time unless it would be beneficial in the long run. Or make the video quality better. We you suggest we upconvert to HD?
    Thanks for the advice on the production monitor. We don't have one at this time, but will be getting one hooked up soon.

    By raw I just mean the untouched/uncompressed file. We are trying to store and archive the best quality format from the betas so that we can take those source files and convert them to various formats in the future.

  6. 0

    mybarnacles

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Sorry this is the first time I have used the IO HD, but what are the correct input settings on the control panel you recommend to avoid cross converting and up converting?

  7. 0

    Ian Hunter*

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    If you are using an iohd into a iMac, I presume you are going in FireWire 800,
    your material is SD, (pal or NTSC) so your control panel input is set as 525i (NTSC)
    capture setting should be uncompressed 8 bit for SP and uncompressed 10 if it was DigiBeta.
    Now make sure that the aja control panel is set to (525i29.97) NTSC or (625i25 (pal)

  8. 0

    mybarnacles

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Yes, using FireWire 800 into the iMac. Currently the AJA control panel settings are at 525i29.97 however they automatically were set to that when we turned it on. Does the AJA control panel automatically detect the settings and formats?

  9. 0

    Shane Ross

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Wait wait wait wait wait.

    First off, does the IO HD do uncompressed SD? I know it has a built in ProRes encoder because Uncompressed HD cannot happen via firewire. So I know it pretty much only does ProRes for HD, but does it only do ProRes for SD? Or does it do Uncompressed for SD? I have only used it for HD. I'll know more by NAB.

    Second...this is on an IMAC? How are you going to capture footage with this on an iMAC? It connects via firewire, and takes over the bus. Meaning that now you cannot connect a firewire drive to the system. And since the iMac doesn't have any other connections other than USB, and USB isn't good for any video (maybe DV)...how will you be doing this?

    Shane

    User uploaded file

  10. 0

    Brian Conner

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    It does uncompressed SD, but to do that, it has to transcode from ProRes NTSC to uncompressed.

    There are Easy Setups for ProRes NTSC, which is ProRes for standard definition. So, it does HD & SD ProRes.

  11. 0

    Shane Ross

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Then I would think the best thing to do in that situation would be to stick with ProRes. So that you don't have to deal with the conversion. ProRes is a perfectly fine codec for SD, and anyway, can the iMac really deal with this?

    Shane

    User uploaded file

  12. 0

    Brian Conner

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Target data rates for various flavors of ProRes at the bottom of page 10:

    http://images.apple.com/finalcutstudio/resources/whitepapers/L342568A_ProResWP.pdf

    They are shown in Mbps. Divide by 8 to get data rates in MBps. So, for 720 X 486 (ProRes NTSC) it's about 5.25 MBps. For HQ, it's just under 8 MBps.

    The problem for an iMac is that the IoHD needs the entire firewire bus, and the iMac doesn't have any other appropriate ports to connect an external media drive to. That means the only option for the Scratch Disk is the system drive. Not a good solution.

    IOW, the iMac is a poor choice for editing video using an IoHD.

  13. 0

    mybarnacles

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Thank you for the answers so far, they have been very helpful.

    Also we will be getting a mac pro soon, we are using the iMac as a temporary solution while we figure out our process. So the external hard drive issue is not really a concern for me while I simply get to know the machine and how to set up a work flow.

  14. 0

    Alessandro Machi

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    The PVW-2800 has a manual tracking knob on it. You MUST optimize the tracking needle while the tape is playing for optimal playback results. I also recommend using the DVC-Pro 50 codec setting rather than the mini-dv setting.

    [Edited by Host]