Benches Mac desktops

13

LaCie HD wakes up even iMac is sleeping

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

Hello!

Since some weeks I have a LaCie HD for backup with TimeMachine. The strange thing is that even when the iMac is asleep the HD starts up for a short moment (about once an hour I guess). I have installed TimeMachine Scheduler and scheduled no backups during the night.

Still the HD starts up. Aperently there is a process checking once and a while if the HD is still present and this wakes the HD up. Which process is this?

Have turned indexing spotlight off for this HD, still same problem.

My question is how can I avoid this?

Thanks for any help.

13 replies

Sign in or join Beachball Help to reply.

  1. 0

    Pondini

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hi, and welcome to the forum.

    If your Mac is really asleep, nothing is running, nothing is checking any external disk.

    It sounds like your Mac is not asleep, but your
    display is.

    Start by checking whether backups are really happening, either via Time Machine (the "Star Wars" display), or
    Click here to download the +Time Machine Buddy+ widget. It shows the messages from your logs for one TM backup run at a time, in a small window.

  2. 0

    RealRedHair

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    He!

    My iMac should be asleep. I use the cmd + alt + eject key to set it to sleep. Correct?

    I use the Time Machine scheduler (
    http://www.klieme.com/TimeMachineScheduler.html) and have set it to make no backup during the night. If I check TimeMachine (by entering Timemachine) no backups are made during the night. Will install the buddy.

    kind regards

  3. 0

    Pondini

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    EchtRoodHaar wrote:

    He!

    My iMac should be asleep. I use the cmd + alt + eject key to set it to sleep. Correct?

    Yes.

    I use the Time Machine scheduler (
    http://www.klieme.com/TimeMachineScheduler.html) and have set it to make no backup during the night.

    Doesn't matter -- if your Mac is asleep, it cannot do backups.

  4. 0

    RealRedHair

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    All fine but still my HD starts during the night. It is asleep and then starts for a moment and then stops again after 10-15 sec. Somehow it is triggered. Either by the iMac or an internal HD process. LaCies Helpdesk blames the iMac to trigger it.

    Any other clue?

  5. 0

    Pondini

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    If the Mac is truly asleep, it
    cannot trigger anything except a wake-up.

    Let's look at your logs. First, determine the exact time you put your Mac to sleep.

    The Use the
    Console app (in your Applications/Utilities folder).

    When it starts, click +Show Log List+ in the toolbar, then navigate in the sidebar that opens up to your
    system.log. It will open at the end (bottom). Most of what you see there will be gibberish; info for developers, etc., but scroll up to the time you put it to sleep (date and time at the left of each message).

    If the top (start) is after the time your Mac went to sleep, you'll need the previous version of the log. Navigate in the sidebar to your
    system.log.0.bz2 file.

    Look for a message something like "AFPSleepWakeHandler: going to sleep." or the like. There may be a message or two following it, but then nothing until it wakes up.

    Waking-up often starts, confusingly enough, with a burst of messages, like: " Sleep: Success - AC - Idle Sleep" followed immediately by "Wake: Success - AC - OHC2" and "AFPSleepWakeHandler: waking up."

    But what's important is not the messages, but the gap in times. From a second or so after you put it to sleep, there are
    no messages until it wakes up. That means nothing happened. Whether you schedule backups or not, they won't happen.

    When your Mac goes to sleep, the contents of RAM are copied out to disk, in a "sleep image" file. Then the disk is powered-down, and so is the RAM. There's just enough left on to allow it to wake up when scheduled, or in response to your mouse or other action. Then the "sleep image" is read back into memory, so the apps and windows that were idle will re-appear.

    So, see if your Mac is really asleep that whole time.

  6. 0

    RealRedHair

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Thanks. There are still messages even iMac is asleep. See below. Calender time change alert?? Maybe Chronosync which I do not use but have installed??

    1/20/10 12:29:34 AM SyncServer[3858] [110f30] |SyncServer|Warning| Refreshing watchdog because of a calendar time change alert.

    1/20/10 2:29:37 AM SyncServer[3858] [110f30] |SyncServer|Warning| Refreshing watchdog because of a calendar time change alert.

    1/20/10 4:29:53 AM SyncServer[3858] [110f30] |SyncServer|Warning| Refreshing watchdog because of a calendar time change alert.

    1/20/10 6:30:09 AM SyncServer[3858] [110f30] |SyncServer|Warning| Refreshing watchdog because of a calendar time change alert.

    1/20/10 8:30:25 AM SyncServer[3858] [110f30] |SyncServer|Warning| Refreshing watchdog because of a calendar time change alert.

    1/20/10 8:30:29 AM com.apple.launchd[1] (com.apple.newsyslog) Throttling respawn: Will start in 4 seconds

    1/20/10 10:30:41 AM SyncServer[3858] [110f30] |SyncServer|Warning| Refreshing watchdog because of a calendar time change alert.

    1/20/10 12:30:57 PM SyncServer[3858] [110f30] |SyncServer|Warning| Refreshing watchdog because of a calendar time change alert.

    1/20/10 12:30:57 PM com.apple.launchd[1] (com.apple.newsyslog) Throttling respawn: Will start in 2 seconds

    1/20/10 2:31:12 PM SyncServer[3858] [110f30] |SyncServer|Warning| Refreshing watchdog because of a calendar time change alert.

  7. 0

    Pondini

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    EchtRoodHaar wrote:

    Thanks. There are still messages even iMac is asleep.

    No, there aren't. Your Mac is not asleep.

    SyncServer is an OSX process for the
    iSync app:
    http://www.apple.com/support/isync/

  8. 0

    RealRedHair

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    From this link:
    http://discussions.apple.com/thread.jspa?threadID=2138565

    Macs that have Wake on Demand enabled will occasionally wake for a brief time, without lighting the screen, in order to maintain registrations with the Bonjour Sleep Proxy. On some Macs, sounds from the optical drive, hard drive, or fans may be heard during these brief maintenance wakes.

    Have Logitech Squeezebox which wakes up iMac. But during the night it is off.

    and:

    This is probably the Bonjour Sleep Proxy functionality in 10.6. It will periodically wake the machine so it can register updated networking info. Though in general I've found it to happen every few hours, versus every half hour.

    This seems the cause but how to solve it?

  9. 0

    RealRedHair

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Turned "wake for network access" off and now it is solved. But then the new question is how to have wake up enabled without the previously described problem?

  10. 0

    RealRedHair

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Nobody has any clue? any suggestions are welcome.

  11. 0

    Pondini

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    You're asking for something that really isn't sensible, from the point of view of OSX.

    When it wakes up from sleep, the contents of the "sleep image" are read back into memory. Then OSX needs to be sure that nothing has changed while it was snoozing, like a disk drive being improperly disconnected, or a network no longer working.

    Occasionally spinning-up does not damage the drive. Any decent drive is designed for that.

  12. 0

    irudy

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I am having the same problem with my LaCie HD. For months now i've tried to tackle that bug. Although it's the LaCie disk that's waking up for about five seconds every hour or so, i am sure that it is a command coming from the Mac. Because my iMac keeps waking from sleep every few hours.

  13. 0

    irudy

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    "wake for network access" turned off, solved it for me too.